Pages that link to "Item:Q791341"

The following pages link to Consistent tangent operators for rate-independent elastoplasticity (Q791341):

Displaying 50 items.

• Algorithmic tangent matrix approach for mixed hardening model of endochronic plasticity (Q1371912) (← links)
• Stress-induced phase transformations in elastic solids under anti-plane deformations: Dissipative constitutive models and numerical simulation (Q1371919) (← links)
• Integration methods for complex plastic constitutive equations (Q1371924) (← links)
• Convergence of Newton-type methods in incremental return mapping analysis of elasto-plastic problems (Q1376139) (← links)
• On the consistent tangent operator algorithm for thermo-plastic problems (Q1376607) (← links)
• Variational inequality formulation for flow theory plasticity (Q1385636) (← links)
• An efficient formulation of integration algorithms for elastoplastic shell analysis based on layered finite element approach (Q1387999) (← links)
• A finite-strain finite element model for the pseudoelastic behavior of shape memory alloys (Q1388011) (← links)
• Computational plasticity for composite structures based on mathematical homogenization: Theory and practice (Q1388015) (← links)
• A two-scale finite element relaxation analysis of shear bands in non-convex inelastic solids: Small-strain theory for standard dissipative materials. (Q1400225) (← links)
• Implicit integration of plasticity models for granular materials. (Q1420932) (← links)
• Finite element simulations of chemo-mechanical coupling in elastic-plastic homoionic expansive clays. (Q1420933) (← links)
• Comparison of different isotropic elastoplastic models at finite strains used in numerical analysis. (Q1420988) (← links)
• Derivation of the fourth-order tangent operator based on a generalized eigenvalue problem (Q1573041) (← links)
• Numerical assessment of delamination in fibre metal laminates (Q1574300) (← links)
• An anisotropic elastoplastic constitutive model for large strain analysis of fiber reinforced composite materials (Q1574308) (← links)
• Numerical differentiation for local and global tangent operators in computational plasticity (Q1581973) (← links)
• A deformation-dependent stabilization technique, exemplified by EAS elements at large strains (Q1582001) (← links)
• Consistent thermo-mechano-metallurgical model of welded steel with unified approach to derivation of phase evolution laws and transformation-induced plasticity (Q1584908) (← links)
• Implicit algorithms for multilayer \(J_2\)-plasticity (Q1584932) (← links)
• Elasto-viscoplatic consistent tangent operator concept-based implicit boundary element methods (Q1585661) (← links)
• A combined material model for numerical simulation of hot isostatic pressing. (Q1587959) (← links)
• On the consistency of viscoplastic formulations. (Q1588095) (← links)
• Finite deformation plasticity based on the additive split of the rate of deformation and hyperelasticity (Q1590345) (← links)
• The bipotential method: a constructive approach to design the complete contact law with friction and improved numerical algorithms. (Q1596829) (← links)
• Application of a partially relaxed shape memory free energy function to estimate the phase diagram and predict global microstructure evolution (Q1601680) (← links)
• A phenomenological constitutive law for the nonlinear viscoelastic behaviour of epoxy resins in the glassy state (Q1604113) (← links)
• An extension of 3-D procedure to large strain analysis of shells (Q1605104) (← links)
• A comparison between the Perzyna viscoplastic model and the consistency viscoplastic model (Q1613131) (← links)
• A framework for multiplicative associative isotropic elasto-plasticity, that preserves the structure of the infinitesimal theory (Q1613148) (← links)
• Ductile sliding between mineral crystals followed by rupture of collagen crosslinks: experimentally supported micromechanical explanation of bone strength (Q1625868) (← links)
• Return mapping algorithms (RMAs) for two-yield surface thermoviscoplastic models using the consistent tangent operator (Q1627900) (← links)
• New strong formulation for material nonlinear problems based on the particle difference method (Q1634661) (← links)
• A new BEM for solving 2D and 3D elastoplastic problems without initial stresses/strains (Q1654841) (← links)
• A solution strategy for non-linear implicit BEM formulation using a unified constitutive modelling framework (Q1654971) (← links)
• A modified Gurson model to account for the influence of the lode parameter at high triaxialities (Q1658001) (← links)
• A four-point integration scheme with quadratic exactness for three-dimensional element-free Galerkin method based on variationally consistent formulation (Q1668746) (← links)
• Modeling and simulation of viscous electro-active polymers (Q1669480) (← links)
• Modelling, analysis and computation in plasticity (Q1734905) (← links)
• A stiffly accurate Rosenbrock-type method of order 2 applied to FE-analyses in finite strain viscoelasticity (Q1760117) (← links)
• Computational methods for elastoplasticity: an overview of conventional and \textit{less-conventional} approaches (Q1787380) (← links)
• Stress-update algorithms for Bigoni-Piccolroaz yield criterion coupled with a generalized function of kinematic hardening laws (Q1788034) (← links)
• A finite strain contact model for mixed lubricated surfaces in forming processes (Q1792360) (← links)
• Global and local mechanical responses for necking of rectangular bars using updated and total Lagrangian finite element formulations (Q1792751) (← links)
• Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels (Q1794112) (← links)
• A semi-smooth Newton method for orthotropic plasticity and frictional contact at finite strains (Q1798556) (← links)
• Mixed stabilized finite element methods in nonlinear solid mechanics. III: compressible and incompressible plasticity (Q1798596) (← links)
• Conservative systems, potential operators and tangent stiffness: Reconsideration and generalization (Q1802893) (← links)
• A general approach to the evaluation of consistent tangent operators for rate-independent elastoplasticity (Q1808129) (← links)
• On a stress resultant geometrically exact shell model. III: Computational aspects of the nonlinear theory (Q1813601) (← links)