Pages that link to "Item:Q4269571"

The following pages link to Elastic crack growth in finite elements with minimal remeshing (Q4269571):

Displaying 50 items.

• Some investigations on 3D homogenization of nano-composite/nano-porous materials with surface effect by FEM/XFEM methods combined with level-set technique (Q2021141) (← links)
• Strength-induced peridynamic modeling and simulation of fractures in brittle materials (Q2021232) (← links)
• Topology optimization with precise evolving boundaries based on IGA and untrimming techniques (Q2021237) (← links)
• Meso-scale physical modeling of energetic degradation function in the nonlocal macro-meso-scale consistent damage model for quasi-brittle materials (Q2021267) (← links)
• A new peridynamic mixed-mode bond failure model for interface delamination and homogeneous materials fracture analysis (Q2021877) (← links)
• Arbitrary 3D crack propagation with improved XFEM: accurate and efficient crack geometries (Q2021932) (← links)
• A variational framework for the strain-smoothed element method (Q2027603) (← links)
• Extended finite element modeling of fatigue crack growth microstructural mechanisms in alloys with secondary/reinforcing phases: model development and validation (Q2033614) (← links)
• A combined XFEM phase-field computational model for crack growth without remeshing (Q2033627) (← links)
• A cohesive zone model which is energetically equivalent to a gradient-enhanced coupled damage-plasticity model (Q2034375) (← links)
• An optimal multigrid algorithm for the combining \(P_1\)-\(Q_1\) finite element approximations of interface problems based on local anisotropic fitting meshes (Q2037337) (← links)
• Peridynamic analysis of dynamic fracture: influence of peridynamic horizon, dimensionality and specimen size (Q2037499) (← links)
• Explicit edge-based smoothed numerical manifold method for transient dynamic modeling of two-dimensional stationary cracks (Q2040792) (← links)
• A field-enriched finite element method for brittle fracture in rocks subjected to mixed mode loading (Q2040810) (← links)
• An efficient automatic adaptive algorithm for cohesive crack propagation modeling of concrete structures using matrix-free unstructured Galerkin finite volume method (Q2047579) (← links)
• Effect of enrichment functions on GFEM solutions of time-dependent conduction heat transfer problems (Q2049711) (← links)
• Enriched mixed numerical manifold formulation with continuous nodal gradients for dynamics of fractured poroelasticity (Q2049754) (← links)
• An efficient mesh-free approach for the determination of stresses intensity factors (Q2058036) (← links)
• A NURBS-discontinuous and enriched isogeometric boundary element formulation for two-dimensional fatigue crack growth (Q2058122) (← links)
• Towards an extrinsic, CG-XFEM approach based on hierarchical enrichments for modeling progressive fracture (Q2060135) (← links)
• A cut finite-element method for fracture and contact problems in large-deformation solid mechanics (Q2060147) (← links)
• Numerical manifold computational homogenization for hydro-dynamic analysis of discontinuous heterogeneous porous media (Q2060162) (← links)
• Effect of shape on void growth: a coupled extended finite element method (XFEM) and discrete dislocation plasticity (DDP) study (Q2063436) (← links)
• Mixed graph-FEM phase field modeling of fracture in plates and shells with nonlinearly elastic solids (Q2072432) (← links)
• A continuous-discontinuous localizing gradient damage framework for failure analysis of quasi-brittle materials (Q2072696) (← links)
• Peridynamic modeling of elastic bimaterial interface fracture (Q2072717) (← links)
• A continuum consistent discrete particle method for continuum-discontinuum transitions and complex fracture problems (Q2072720) (← links)
• Shear band evolution and post-failure simulation by the extended material point method (XMPM) with localization detection and frictional self-contact (Q2072751) (← links)
• A Nitsche mixed extended finite element method for the biharmonic interface problem (Q2079316) (← links)
• A network element method for heterogeneous and anisotropic diffusion-reaction problems (Q2083689) (← links)
• Plastic crack-tip fields under thermoplastic loads (Q2102583) (← links)
• Virtual element methods for engineering applications (Q2106433) (← links)
• A novel kinematic-constraint-inspired non-ordinary state-based peridynamics (Q2109744) (← links)
• Temporally stabilized peridynamics methods for shocks in solids (Q2115590) (← links)
• Global-local analysis with element free Galerkin method (Q2118587) (← links)
• An extended mixed finite element method for elliptic interface problems (Q2122639) (← links)
• Discontinuous bubble immersed finite element method for Poisson-Boltzmann-Nernst-Planck model (Q2124420) (← links)
• Stable generalized finite element methods (SGFEM) for interfacial crack problems in bi-materials (Q2127951) (← links)
• Multiscale extended finite element method for deformable fractured porous media (Q2131076) (← links)
• A recycling preconditioning method with auxiliary tip subspace for elastic crack propagation simulation using XFEM (Q2133589) (← links)
• Topology optimization for enhanced dynamic fracture resistance of structures (Q2136707) (← links)
• Well-conditioned and optimally convergent second-order generalized/extended FEM formulations for linear elastic fracture mechanics (Q2136747) (← links)
• An improved embedded discrete fracture model and domain connectivity algorithms on 3D unstructured grids (Q2137941) (← links)
• A thermodynamically consistent phase field model for mixed-mode fracture in rock-like materials (Q2138677) (← links)
• Adaptive stochastic morphology simulation and mesh generation of high-quality 3D particulate composite microstructures with complex surface texture (Q2138833) (← links)
• A combined phase-field and cohesive zone model approach for crack propagation in layered structures made of nonlinear rubber-like materials (Q2142197) (← links)
• Unfitted finite element method for fully coupled poroelasticity with stabilization (Q2145133) (← links)
• Assessment of the \textit{flat-top} stable GFEM for free vibration analysis (Q2147319) (← links)
• Design and analysis of the extended hybrid high-order method for the Poisson problem (Q2154713) (← links)
• Optimizing the search directions of a mixed DDM applied on cracks (Q2168628) (← links)