The following pages link to Computational Mechanics (Q167899):
Displaying 50 items.
- Boundary element analysis for effective stiffness tensors: effect of fabric tensor determination method (Q360307) (← links)
- BEM solution of delamination problems using an interface damage and plasticity model (Q360309) (← links)
- Oblique mid ocean ridge subduction modelling with the parallel fast multipole boundary element method (Q360315) (← links)
- Combining Maxwell's methodology with the BEM for evaluating the two-dimensional effective properties of composite and micro-cracked materials (Q360318) (← links)
- High gradient magnetic particle separation in viscous flows by 3D BEM (Q360320) (← links)
- An efficient algorithm for computing the dynamic responses of one-dimensional periodic structures and periodic structures with defects (Q364102) (← links)
- A comparison of stress intensity factors obtained through crack closure integral and other approaches using extended element-free Galerkin method (Q364107) (← links)
- A damping boundary condition for coupled atomistic-continuum simulations (Q364110) (← links)
- Interface characteristics of nanorope reinforced polymer composites (Q364113) (← links)
- Modelling of tunnelling processes and rock cutting tool wear with the particle finite element method (Q364116) (← links)
- A penalty finite element approach for couple stress elasticity (Q364119) (← links)
- Modeling and simulation of liquid diffusion through a porous finitely elastic solid (Q364121) (← links)
- Variational methods for selective mass scaling (Q364124) (← links)
- Modified least square finite difference method for solving the gas film lubrication equation in the head/disk interface (Q364125) (← links)
- Modeling a smooth elastic-inelastic transition with a strongly objective numerical integrator needing no iteration (Q364127) (← links)
- Multi-modal wave propagation in smart structures with shunted piezoelectric patches (Q364132) (← links)
- A velocity-decomposition formulation for the incompressible Navier-Stokes equations (Q364136) (← links)
- On the exploitation of Armstrong-Frederik type nonlinear kinematic hardening in the numerical integration and finite-element implementation of pressure dependent plasticity models (Q364139) (← links)
- A smoothed particle hydrodynamics study on the electrohydrodynamic deformation of a droplet suspended in a neutrally buoyant Newtonian fluid (Q364140) (← links)
- A wideband FMBEM for 2D acoustic design sensitivity analysis based on direct differentiation method (Q364141) (← links)
- Phenomenological modelling of self-healing polymers based on integrated healing agents (Q364143) (← links)
- A discontinuous/continuous Galerkin method for modeling of interphase damage in fibrous composite systems (Q364145) (← links)
- Finite strain viscoelasticity: how to consistently couple discretizations in time and space on quadrature-point level for full order \(p\geq 2\) and a considerable speed-up (Q364147) (← links)
- A NURBS enhanced extended finite element approach for unfitted CAD analysis (Q386305) (← links)
- On the dynamics of uncertain coupled structures through a wave based method in mid- and high-frequency ranges (Q386308) (← links)
- Real-time validation of mechanical models coupling PGD and constitutive relation error (Q386312) (← links)
- A new boundary element formulation for wave load analysis (Q386314) (← links)
- Restraining approach for the spurious kinematic modes in hybrid equilibrium element (Q386316) (← links)
- Initially rigid cohesive laws and fracture based on edge rotations (Q386318) (← links)
- Fatigue crack growth simulations of interfacial cracks in bi-layered fgms using XFEM (Q386319) (← links)
- Patch based recovery in finite element elastoplastic analysis (Q386321) (← links)
- Efficiency improvement of the frequency-domain BEM for rapid transient elastodynamic analysis (Q386323) (← links)
- A finite element method for contact using a third medium (Q386325) (← links)
- At least three invariants are necessary to model the mechanical response of incompressible, transversely isotropic materials (Q386326) (← links)
- Meshless analysis of shear deformable shells: the linear model (Q386329) (← links)
- Finite element simulation of phase field model for nanoscale martensitic transformation (Q386333) (← links)
- Towards the stabilization of the low density elements in topology optimization with large deformation (Q386337) (← links)
- Local enrichment of the finite cell method for problems with material interfaces (Q386338) (← links)
- An extended crystal plasticity model for latent hardening in polycrystals (Q411287) (← links)
- 2D simulation of the deformation of pH-sensitive hydrogel by novel strong-form meshless random differential quadrature method (Q411289) (← links)
- An inelastic Timoshenko beam element with axial-shear-flexural interaction (Q411290) (← links)
- Time history kernel functions for square lattice (Q411293) (← links)
- The finite point method for the \(p\)-Laplace equation (Q411294) (← links)
- Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics (Q411297) (← links)
- An effective computational tool for parametric studies and identification problems in materials mechanics (Q411299) (← links)
- Hybrid-Trefftz displacement element for poroelastic media (Q411301) (← links)
- Dispersion and transient analyses of Hermite reproducing kernel Galerkin meshfree method with sub-domain stabilized conforming integration for thin beam and plate structures (Q416088) (← links)
- An edge-based smoothed triangle element for non-linear explicit dynamic analysis of shells (Q416091) (← links)
- Analysis of laminated doubly-curved shells by a layerwise theory and radial basis functions collocation, accounting for through-the-thickness deformations (Q416092) (← links)
- Consistent tangent moduli for multi-yield-surface \(J_{2}\) plasticity model (Q416097) (← links)
