The following pages link to Computational Mechanics (Q167899):
Displaying 50 items.
- A new SMA shell element based on the corotational formulation (Q487855) (← links)
- A mixed finite element procedure of gradient Cosserat continuum for second-order computational homogenisation of granular materials (Q487860) (← links)
- A simple and efficient preconditioning scheme for Heaviside enriched XFEM (Q487861) (← links)
- A reverse updated Lagrangian finite element formulation for determining material properties from measured force and displacement data (Q487863) (← links)
- Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-Carlo method (Q487869) (← links)
- Goal-oriented updating of mechanical models using the adjoint framework (Q487870) (← links)
- NURBS distance fields for extremely curved cracks (Q487871) (← links)
- A new method for the generation of arbitrarily shaped 3D random polycrystalline domains (Q487875) (← links)
- Multiscale methods for gore curvature calculations from FSI modeling of spacecraft parachutes (Q487880) (← links)
- Nonlinear frequency response analysis of structural vibrations (Q487882) (← links)
- Efficient fixed point and Newton-Krylov solvers for FFT-based homogenization of elasticity at large deformations (Q487883) (← links)
- An extended molecular statics algorithm simulating the electromechanical continuum response of ferroelectric materials (Q487885) (← links)
- Virtual charts of solutions for parametrized nonlinear equations (Q487887) (← links)
- A generalized 2D non-local lattice spring model for fracture simulation (Q487891) (← links)
- Wave propagation through periodic lattice with defects (Q487892) (← links)
- A consistent interface element formulation for geometrical and material nonlinearities (Q487895) (← links)
- Updated Lagrangian mixed finite element formulation for quasi and fully incompressible fluids (Q487897) (← links)
- Progressive delamination analysis of composite materials using XFEM and a discrete damage zone model (Q487899) (← links)
- Small strain elasto-plastic multiphase-field model (Q487903) (← links)
- Multiscale modeling of the effect of the interfacial transition zone on the modulus of elasticity of fiber-reinforced fine concrete (Q487904) (← links)
- Coulomb frictional contact by explicit projection in the cone for finite displacement quasi-static problems (Q487907) (← links)
- Multiscale modelling framework for the fracture of thin brittle polycrystalline films: application to polysilicon (Q487915) (← links)
- Impact of data distribution on the parallel performance of iterative linear solvers with emphasis on CFD of incompressible flows (Q487916) (← links)
- Smoothed finite element method implemented in a resultant eight-node solid-shell element for geometrical linear analysis (Q487920) (← links)
- On efficient and reliable stochastic generation of RVEs for analysis of composites within the framework of homogenization (Q487923) (← links)
- An accurate quadrature technique for the contact boundary in 3D finite element computations (Q487924) (← links)
- Numerical simulation of a flow-like landslide using the particle finite element method (Q487927) (← links)
- Application of multilevel scheme and two level discretization for POD based model order reduction of nonlinear transient heat transfer problems (Q487928) (← links)
- Self-contact modeling on beams experiencing loop formation (Q487930) (← links)
- Segment-based vs. element-based integration for mortar methods in computational contact mechanics (Q487933) (← links)
- Automatic implementation of finite strain anisotropic hyperelastic models using hyper-dual numbers (Q487936) (← links)
- Multiscale modeling of failure in composites under model parameter uncertainty (Q498537) (← links)
- Computational aspects of growth-induced instabilities through eigenvalue analysis (Q498540) (← links)
- Homogenization of soft interfaces in time-dependent hydrodynamic lubrication (Q498543) (← links)
- Computing intersections between non-compatible curves and finite elements (Q498547) (← links)
- Accuracy of the fast multipole boundary element method with quadratic elements in the analysis of 3D porous structures (Q498549) (← links)
- 3D BEM for orthotropic frictional contact of piezoelectric bodies (Q498552) (← links)
- Anisotropic finite strain viscoelasticity based on the Sidoroff multiplicative decomposition and logarithmic strains (Q498555) (← links)
- Efficient uncertainty quantification in stochastic finite element analysis based on functional principal components (Q498557) (← links)
- A gap element for treating non-matching discrete interfaces (Q498558) (← links)
- Patch based stress recovery for plate structures (Q537556) (← links)
- Nonlinear forced vibration of damped plates coupling asymptotic numerical method and reduction models (Q537559) (← links)
- The vibrations of pre-twisted rotating Timoshenko beams by the Rayleigh-Ritz method (Q537560) (← links)
- A novel technique to parametrize shell-like deformations inside biological membranes (Q537562) (← links)
- A Hermite DRK interpolation-based collocation method for the analyses of Bernoulli-Euler beams and Kirchhoff-Love plates (Q537564) (← links)
- A local Petrov-Galerkin approach with moving Kriging interpolation for solving transient heat conduction problems (Q537565) (← links)
- Nonlinear modal analysis of mechanical systems with frictionless contact interfaces (Q537568) (← links)
- \(\mathrm{C}^0\)-type global-local theory with non-zero normal strain for the analysis of thick multilayer composite plates (Q539436) (← links)
- Finite element simulations of poly-crystalline shape memory alloys based on a micromechanical model (Q539439) (← links)
- Frequency response analyses in vibroacoustics using the method of fundamental solutions (Q539440) (← links)
