The following pages link to ANSYS (Q12817):
Displaying 50 items.
- Stability and free vibration behaviour of laminated composite panels under thermo-mechanical loading (Q722640) (← links)
- Numerical modeling of interaction of a current with a circular cylinder near a rigid bed (Q730994) (← links)
- A theoretical model of the endothelial cell morphology due to different waveforms (Q738206) (← links)
- A large strain finite volume method for orthotropic bodies with general material orientations (Q741925) (← links)
- A scaled boundary polygon formulation for elasto-plastic analyses (Q741966) (← links)
- Effect of Hartmann layer resolution for MHD flow in a straight, conducting duct at high Hartmann numbers (Q747693) (← links)
- In vivo based biomechanics of right and left coronary arteries (Q784926) (← links)
- Numerical analysis of the behaviour of tooth intraradial posts by the finite element method (Q812070) (← links)
- Update to the MUSIG model in ANSYS CFX for reliable modelling of bubble coalescence and breakup (Q821694) (← links)
- Computation of seismic resistance of an ice island by the grid-characteristic method on combined grids (Q822219) (← links)
- Mathematical modeling and dynamic characteristic analysis of a novel parallel tracking mechanism for inter-satellite link antenna (Q823486) (← links)
- On the transient response of plates on fractionally damped viscoelastic foundation (Q827344) (← links)
- On the potential applications of a 3D random finite element model for the simulation of shot peening (Q833632) (← links)
- Numerical simulation of laminar breakdown and subsequent intermittent and turbulent flow in parallel-plate channels: effects of inlet velocity profile and turbulence intensity (Q833687) (← links)
- Elastic-plastic thermal stress analysis in a thermoplastic composite disc under applied linear temperature loads via FEM (Q834206) (← links)
- A new approach with orthogonal array for global optimization in design of experiments (Q835797) (← links)
- Two-scale analysis of a filament-wound cylindrical structure and application of periodic boundary conditions (Q835909) (← links)
- The use of conservative integral in bi-material interface crack problems subjected to thermal loads (Q837283) (← links)
- Determination of mixed-mode stress intensity factors, fracture toughness, and crack turning angle for anisotropic foam material (Q837495) (← links)
- Nonlinear vibration of shallow cables with semiactive tuned mass damper (Q841740) (← links)
- Modeling of hard disk drives for shock and vibration analysis -- consideration of nonlinearities and discontinuities (Q842282) (← links)
- Nonlinear analysis of a reinforced concrete sheet cover (umbrella) of 40 m diameter by the finite element method (Q870115) (← links)
- Mathematical modelling of the superplastic forming of a long rectangular sheet (Q873032) (← links)
- Experimental-theoretical analysis of local stresses in box girders of trapezoidal cross section (Q890446) (← links)
- A comparison of modeling techniques for temperature fields of inductive heating plates (Q891223) (← links)
- Effective use of numerical optimization in structural design (Q911872) (← links)
- Cable vibration mitigation by added SMA wires (Q925894) (← links)
- Optimal balancing of flexible rotors by minimizing the condition number of influence coefficients (Q928934) (← links)
- Developing a formulation based upon curvature for analysis of nonprismatic curved beams (Q936220) (← links)
- Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure (Q939301) (← links)
- An application service provider for finite element analysis (Q942349) (← links)
- Carrying capacity of edge-cracked columns under concentric vertical loads (Q943053) (← links)
- Coupled models of heat transfer and phase transformation for the run-out table in hot rolling (Q943144) (← links)
- Stress analysis of a novice windsurfer sail by finite element analysis (Q949473) (← links)
- Numerical simulation of powder mixed electric discharge machining (PMEDM) using finite element method (Q949490) (← links)
- A BEM formulation for analysing the coupled stretching-bending problem of plates reinforced by rectangular beams with columns defined in the domain (Q964752) (← links)
- Numerical damage assessment of haghia sophia Bell tower by nonlinear FE modeling (Q967784) (← links)
- Study of posterolateral lumbar arthrodesis by means of a finite element model (Q969932) (← links)
- A jaw model for the study of the mandibular flexure taking into account the anisotropy of the bone (Q969936) (← links)
- Shape optimal design of arch dams including dam-water-foundation rock interaction using a grading strategy and approximation concepts (Q971988) (← links)
- Nonlinear explicit analysis and study of the behaviour of a new ring-type brake energy dissipator by FEM and experimental comparison (Q972932) (← links)
- Investigation of the LES WALE turbulence model within the lattice Boltzmann framework (Q988288) (← links)
- A new model for three-dimensional random roughness effect on friction factor and heat transfer in microtubes (Q992914) (← links)
- Fluid flow and heat transfer in vascularized cooling plates (Q992974) (← links)
- Investigation of local heat transfer coefficients in plate heat exchangers with temperature oscillation IR thermography and CFD (Q992995) (← links)
- CFD analysis of viscous non-Newtonian flow under the influence of a superimposed rotational vibration (Q993939) (← links)
- Stiffness properties of particulate composites containing debonded particles (Q994751) (← links)
- A finite element finite-strain formulation for modeling colliding blocks of Gent materials (Q994756) (← links)
- Novel approach for determining the optimal axial preload of a simulating rotary table spindle system (Q996191) (← links)
- Flow analysis in valve with moving grids through CFD techniques (Q1005597) (← links)
