Pages that link to "Item:Q162169"

The following pages link to International Journal of Mechanical Sciences (Q162169):

Displaying 50 items.

• Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming (Q986209) (← links)
• An analysis of force distribution in shear spinning of cone (Q986213) (← links)
• A generalized self-consistent estimate for the effective elastic moduli of fiber-reinforced composite materials with multiple transversely isotropic inclusions (Q986217) (← links)
• Free vibration of elastic helicoidal shells (Q986218) (← links)
• The similarity analysis of vibrating membrane with its applications (Q986221) (← links)
• The development of a tunable vibration absorbing isolator (Q986224) (← links)
• Forced vibration of composite cylindrical helical rods (Q986227) (← links)
• Analytical and numerical approach to prediction of forming limit in tube hydroforming (Q986228) (← links)
• Inverse calculation of the friction coefficient during the warm upsetting of molybdenum (Q986230) (← links)
• Slip-line modeling of built-up edge formation in machining (Q986232) (← links)
• Torsion of thin-walled beams of open cross-section with influence of shear (Q986234) (← links)
• A new forming-limit criterion for fracture prediction in a powder forging application (Q986235) (← links)
• Thermomechanical postbuckling analysis of moderately thick functionally graded plates and shallow shells (Q986236) (← links)
• The nonlinear electrostatic behavior for shaped electrode actuators (Q986238) (← links)
• Structural damping caused by micro-slip along frictional interfaces (Q986239) (← links)
• Exact vibration results for stepped circular plates with free edges (Q986240) (← links)
• Estimation of welded joint strength using genetic algorithm approach (Q986242) (← links)
• A wavelet-based approach for the identification of damping in nonlinear oscillators (Q986245) (← links)
• The lamb's problem for a half-space covered with the pre-stretched layer (Q986248) (← links)
• General approach to residual stresses determination in thin-walled structures by combining the hole drilling method and reflection hologram interferometry (Q986249) (← links)
• Adiabatic shear in chip formation with negative rake angle (Q986252) (← links)
• Thermo-mechanical model of frictional self-excited vibrations (Q986253) (← links)
• Analyses of piezoelectric plates with elliptical notches by special finite element (Q986254) (← links)
• An internal state variable plasticity-based approach to determine dynamic loading history effects on material property in manufacturing processes (Q986255) (← links)
• Determining probability of mission success when using deep penetration weapons (Q986257) (← links)
• Transmission of shear waves through a self-reinforced layer sandwiched between two inhomogeneous viscoelastic half-spaces (Q986259) (← links)
• Comments on ``Buckling behavior of a graphite/epoxy composite plate under parabolic variation of axial loads'' [Int. J. Mech. Sci. 45, No. 6-7, 1135--1147 (2003)] (Q986260) (← links)
• Response to comments on ``Buckling behavior of a graphite/epoxy composite plate under parabolic variation of axial loads'' [Int. J. Mech. Sci. 45, No. 6-7, 1135--1147 (2003)] (Q986261) (← links)
• Stochastic analysis of compositionally graded plates with system randomness under static loading (Q986262) (← links)
• Self-excited vibrations of a rigid rotor rubbing with the motion-limiting stop (Q986264) (← links)
• \(C^0\) plate element for global/local analysis of multilayered composites, based on a 3D zig-zag model and strain energy updating (Q986266) (← links)
• An efficient approach for shape optimization of components (Q986268) (← links)
• Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius (Q986272) (← links)
• Compressive membrane action in circular reinforced slabs (Q986273) (← links)
• On the inadequacy of the single-shear plane model of chip formation (Q986275) (← links)
• Modelling of cross-ply piezoelectric composite laminates in cylindrical bending with interfacial shear slip (Q986276) (← links)
• Measurement of residual stress in thick section composite laminates using the deep-hole method (Q986284) (← links)
• Vibration analysis of cross-ply laminated beams with general boundary conditions by Ritz method (Q986285) (← links)
• Finite element simulation of the punchless piercing process with lemaitre damage model (Q986287) (← links)
• Three-dimensional solution for transient thermal stresses of functionally graded rectangular plate due to nonuniform heat supply (Q986288) (← links)
• Thermally induced vibration of a thermal sleeve with the GDQ method (Q986289) (← links)
• Derivation of creep long-term fracture criteria under plane state of stress (Q986290) (← links)
• Plastic instability in dual-pressure tube-hydroforming process (Q986292) (← links)
• Simulation of Mannesmann piercing process by the three-dimensional rigid-plastic finite element method (Q986294) (← links)
• Eigenanalysis and continuum modelling of a curved repetitive beam-like structure (Q986295) (← links)
• Fracture limits of sheet metals under stretch bending (Q986299) (← links)
• An anisotropic damage-based plastic yield criterion and its application to analysis of metal forming process (Q986300) (← links)
• Geometric nonlinear analysis of thin flat plates under end shortening, using different versions of the finite strip method (Q986304) (← links)
• Sheet metal formability analysis for anisotropic materials under non-proportional loading (Q986305) (← links)
• Comment on the paper ``Performance of the \(p\)-version finite element method for limit analysis'' by \textit{F. Tin-Loi} and \textit{N. S. Ngo} [Int. J. Mech. Sci. 45, No. 6-7, 1149--1166 (2003)] (Q986306) (← links)