The following pages link to FLUENT (Q16446):
Displaying 50 items.
- Neural networks analysis of free laminar convection heat transfer in a partitioned enclosure (Q883542) (← links)
- Rapid microfluidic thermal cycler for polymerase chain reaction nucleic acid amplification (Q927967) (← links)
- Transport from a volatile meniscus inside an open microtube (Q929836) (← links)
- Numerical study of film cooled rotor leading edge with tip clearance in 1-1/2 turbine stage (Q929845) (← links)
- An experimental and numerical study of stagnation point heat transfer for methane/air laminar flame impinging on a flat surface (Q936293) (← links)
- Single-phase and two-phase cooling using hybrid micro-channel/slot-jet module (Q936334) (← links)
- Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module (Q936344) (← links)
- Minimizing hot spot temperature of porous stackings in natural convection (Q936375) (← links)
- Aerodynamic noise simulation of the flow past an airfoil trailing-edge using a hybrid zonal RANS-LES (Q942686) (← links)
- Single-phase hybrid micro-channel/micro-jet impingement cooling (Q945718) (← links)
- Introduction of a length correction factor for the calculation of laminar flow through microchannels with high surface roughness (Q945758) (← links)
- Numerical study of the swirl flow in F-5E intake with subsonic speeds (Q949555) (← links)
- Effects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme (Q955742) (← links)
- Finite-volume modelling of system with compressible flow propelled and actuated body motion (Q965569) (← links)
- Green's function, temperature in a convectively cooled sphere with arbitrarily located spherical heat sources (Q965628) (← links)
- Computational aero-acoustic analysis of a passenger car with a rear spoiler (Q967758) (← links)
- A fully coupled, transient double-diffusive convective model for salt-gradient solar ponds (Q974894) (← links)
- Effect of turbulence and devolatilization models on coal gasification simulation in an entrained-flow gasifier (Q974947) (← links)
- Numerical simulation of steady flow fields in coiled flow inverter (Q978390) (← links)
- Inertial capture in flow through porous media (Q978591) (← links)
- Applied modelling for bio and lean gas fired micro gas turbines (Q979591) (← links)
- Fluid flow and heat transfer in wavy microchannels (Q985174) (← links)
- Performance of turbulence models for flows through rough pipes (Q988367) (← links)
- Auto-ignition of diesel spray using the PDF-eddy break-up model (Q988405) (← links)
- A high-resolution penalization method for large Mach number flows in the presence of obstacles (Q989043) (← links)
- Analysis of evaporating mist flow for enhanced convective heat transfer (Q992931) (← links)
- Effects of inlet geometry on heat transfer and fluid flow of tangential micro-heat sink (Q992959) (← links)
- Flow structure and heat transfer induced by embedded vorticity (Q992966) (← links)
- A numerical analysis of slab heating characteristics in a walking beam type reheating furnace (Q993015) (← links)
- Testing and modelling of a novel ceiling panel for maintaining space relative humidity by moisture transfer (Q993034) (← links)
- Influence of combustion parameters on \(NO_x\) production in an industrial boiler (Q993936) (← links)
- A fast modelling tool for plate heat exchangers based on depth-averaged equations (Q1009772) (← links)
- Analytical characterization of heat transport through biological media incorporating hyperthermia treatment (Q1009845) (← links)
- Three-dimensional simulation of turbulent forced convection in a duct with backward-facing step (Q1009851) (← links)
- An enhanced thermal conduction model for the prediction of convection dominated solid-liquid phase change (Q1009859) (← links)
- Numerical simulation of free surface flows on a fish bypass (Q1013208) (← links)
- Experimental investigation and CFD modelling of flow, sedimentation, and solids separation in a combined sewer detention tank (Q1013225) (← links)
- Modeling mass loading effects in industrial cyclones by a combined Eulerian-Lagrangian approach (Q1026504) (← links)
- Computational fluid dynamics modelling of gas jets impinging onto liquid pools (Q1031672) (← links)
- On numerical solution of the incompressible Navier-Stokes equations with static or total pressure specified on boundaries (Q1036338) (← links)
- 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles. I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles (Q1037704) (← links)
- 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles. II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles (Q1037705) (← links)
- CFD modeling of mass transfer in annular reactors (Q1037709) (← links)
- Numerical simulation of turbulent flow in a Ranque-Hilsch vortex tube (Q1037724) (← links)
- Numerical simulation of concrete hollow bricks by the finite volume method (Q1037742) (← links)
- Heat transportation by oscillatory flow in a new type of heat transportation pipe (Q1037746) (← links)
- A building corner model for hygrothermal performance and mould growth risk analyses (Q1038183) (← links)
- Numeric modeling of thermal pollution in Plomin bay area (Q1041323) (← links)
- Computational fluid dynamics based retrofits to reheater panel overheating of No. 3 boiler of Dagang power plant (Q1043051) (← links)
- Parametric studies of exhaust smoke-superstructure interaction on a naval ship using CFD (Q1043216) (← links)
