The following pages link to OpenFOAM (Q16496):
Displaying 50 items.
- Coupling of discrete element model (DEM) with computational fluid mechanics (CFD): a validation study (Q671077) (← links)
- Computational study of decaying annular vortex flow using the \(R_{\epsilon }/k - \epsilon \) turbulence model (Q693618) (← links)
- Large time-step explicit integration method for solving problems with dominant convection (Q695827) (← links)
- Janus surface concept for three-dimensional turbulent flows (Q720931) (← links)
- Edge curvature effects of a square cylinder on self-sustained oscillations (Q720946) (← links)
- Spatiotemporal adaptive multiphysics simulations of drainage-imbibition cycles (Q722835) (← links)
- Large-eddy simulations for hill terrains: validation with wind-tunnel and field measurements (Q725831) (← links)
- Development of an unresolved CFD-DEM model for the flow of viscous suspensions and its application to solid-liquid mixing (Q726831) (← links)
- On the improved finite volume procedure for simulation of turbulent flows over real complex terrains (Q729148) (← links)
- Improved PISO algorithms for modeling density varying flow in conjugate fluid-porous domains (Q729329) (← links)
- A large strain finite volume method for orthotropic bodies with general material orientations (Q741925) (← links)
- Two-phase flow boiling in small channels: a brief review (Q746460) (← links)
- An efficient cell-centered finite-volume method with face-averaged nodal-gradients for triangular grids (Q777620) (← links)
- Conservative finite-volume framework and pressure-based algorithm for flows of incompressible, ideal-gas and real-gas fluids at all speeds (Q778323) (← links)
- Regularized ensemble Kalman methods for inverse problems (Q781982) (← links)
- Investigations into transient wakes behind a custom airfoil undergoing pitching motion (Q821194) (← links)
- Numerical simulation of bubble growth in a supersaturated solution (Q821720) (← links)
- A POD-Galerkin reduced order model of a turbulent convective buoyant flow of Sodium over a backward-facing step (Q822069) (← links)
- Multiscale numerical workflow describing microalgae motion and light pattern incidence towards population growth in a photobioreactor (Q827791) (← links)
- Flux balanced approximation with least-squares gradient for diffusion equation on polyhedral mesh (Q830004) (← links)
- Modeling the cosmogenic tsunami within the framework of the Navier-Stokes equations with sources of different types (Q893546) (← links)
- Experimental and numerical investigation of a viscoplastic carbopol gel injected into a prototype 3D mold cavity (Q1046018) (← links)
- Realizability improvements to a hybrid mixture-bubble model for simulation of cavitating flows (Q1615558) (← links)
- A numerical study of blood flow using mixture theory (Q1617919) (← links)
- A smoothed particle hydrodynamics approach for thermo-capillary flows (Q1625614) (← links)
- An improved method for coupling the in-nozzle cavitation with multi-fluid-quasi-VOF model for diesel spray (Q1626158) (← links)
- OpenFOAM applied to the CFD simulation of turbulent buoyant atmospheric flows and pollutant dispersion inside large open pit mines under intense insolation (Q1641186) (← links)
- On the implementation of low-dissipative Runge-Kutta projection methods for time dependent flows using OpenFOAM{\circledR} (Q1641284) (← links)
- Quasi-DNS capabilities of OpenFOAM for different mesh types (Q1641355) (← links)
- Analysis of the wake dynamics of stiff and flexible cantilever beams using POD and DMD (Q1641507) (← links)
- Triggering vortex shedding for flow past circular cylinder by acting on initial conditions: a numerical study (Q1641535) (← links)
- Numerical and experimental characterization of the 2D vertical average-velocity plane at the center-profile and qualitative air entrainment inside a gully for drainage and reverse flow (Q1641557) (← links)
- A new robust consistent hybrid finite-volume/particle method for solving the PDF model equations of turbulent reactive flows (Q1641626) (← links)
- Study on CFD-PBM turbulence closures based on \(k\)-\(\varepsilon\) and Reynolds stress models for heterogeneous bubble column flows (Q1641635) (← links)
- Coupling of solvers with non-conforming computational domains in a dual-mesh hybrid LES/RANS framework (Q1643675) (← links)
- Richtmyer-Meshkov instability of a liquid-gas interface driven by a cylindrical imploding pressure wave (Q1643710) (← links)
- An Eulerian stochastic field cavitation model coupled to a pressure based solver (Q1645436) (← links)
- Fluid structures of flapping airfoil with elliptical motion trajectory (Q1645558) (← links)
- Simulation of spatial high speed mixing layers using LES (Q1645583) (← links)
- Numerical method for coupled interfacial surfactant transport on dynamic surface meshes of general topology (Q1645591) (← links)
- Lentfoam -- a hybrid level set/front tracking method on unstructured meshes (Q1645655) (← links)
- Direct numerical simulation of droplet formation processes under the influence of soluble surfactant mixtures (Q1645675) (← links)
- Flow structure in a short chamber of a labyrinth seal with a backward-facing step (Q1645684) (← links)
- On the use of the method of manufactured solutions for the verification of CFD codes for the volume-averaged Navier-Stokes equations (Q1645692) (← links)
- Computational fluid dynamics as a tool to understand the motility of microorganisms (Q1645727) (← links)
- Nesting an incompressible-flow code within a compressible-flow code: a two-dimensional study (Q1645746) (← links)
- Direct numerical simulation of electromagnetically forced flows using openfoam (Q1645769) (← links)
- Influence of spatial discretization schemes on accuracy of explicit LES: canonical problems to engine-like geometries (Q1645819) (← links)
- Turbulent flow in rough wall channels: \textit{validation} of RANS models (Q1646006) (← links)
- Large eddy simulation of a piston-cylinder assembly: the sensitivity of the in-cylinder flow field for residual intake and in-cylinder velocity structures (Q1646019) (← links)
