The following pages link to OpenFOAM (Q16496):
Displaying 50 items.
- Validation of OpenFOAM numerical methods and turbulence models for incompressible bluff body flows (Q1646053) (← links)
- Optimal control of a transitional jet using a continuous adjoint method (Q1646770) (← links)
- Numerical modeling of laser generated cavitation bubbles with the finite volume and volume of fluid method, using OpenFOAM (Q1646780) (← links)
- Implementation of the classical plasma-fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM (Q1646842) (← links)
- Modelling the effect of freestream turbulence on dynamic stall of wind turbine blades (Q1646849) (← links)
- Evaluation of oscillation-free fluid-porous interface treatments for segregated finite volume flow solvers (Q1646918) (← links)
- Numerical aspects of Eulerian gas-particles flow formulations (Q1646971) (← links)
- From steady to unsteady laminar flow in model porous structures: an investigation of the first Hopf bifurcation (Q1647002) (← links)
- Detached-eddy simulations of the flow over a cylinder at \(\mathrm{Re} = 3900\) using OpenFOAM (Q1647010) (← links)
- Large-eddy simulations of flow past a square cylinder using structured and unstructured grids (Q1647065) (← links)
- Assessment of a one-way nesting procedure for obstacle resolved large eddy simulation of the ABL (Q1647146) (← links)
- A new level set numerical wave tank with improved density interpolation for complex wave hydrodynamics (Q1647156) (← links)
- Large-eddy simulations of flow normal to a circular disk at \(\mathit{Re} = 1.5 \times 10^5\) (Q1647199) (← links)
- preCICE -- a fully parallel library for multi-physics surface coupling (Q1647254) (← links)
- An accelerated computation of combustion with finite-rate chemistry using LES and an open source library for in-situ-adaptive tabulation (Q1648183) (← links)
- pdFOAM: a PIC-DSMC code for near-Earth plasma-body interactions (Q1648245) (← links)
- A parallel volume of fluid-Lagrangian parcel tracking coupling procedure for diesel spray modelling (Q1648263) (← links)
- A low-dissipative solver for turbulent compressible flows on unstructured meshes, with openfoam implementation (Q1648304) (← links)
- Numerical simulation of cavitation bubble collapse within a droplet (Q1648326) (← links)
- Comparative study of different subgrid-scale models for large eddy simulations of magnetohydrodynamic turbulent duct flow in openfoam (Q1648334) (← links)
- Implementation of the ghost fluid method for free surface flows in polyhedral finite volume framework (Q1648340) (← links)
- Optimized temperature perturbation method to generate turbulent inflow conditions for LES/DNS simulations (Q1648368) (← links)
- Effects of numerical dissipation on the interpretation of simulation results in computational fluid dynamics (Q1648398) (← links)
- The implementation of subsonic boundary conditions for the direct simulation Monte Carlo method in dsmcFoam (Q1648449) (← links)
- Enhancement of propulsive performance of flapping foil by fish-like motion pattern (Q1648460) (← links)
- An immersed boundary method in \textit{OpenFOAM} : verification and validation (Q1648525) (← links)
- Towards a generalised dual-mesh hybrid LES/RANS framework with improved consistency (Q1648528) (← links)
- Shock-conforming mesh generation for aerodynamic analyses at supersonic regimes (Q1648552) (← links)
- A biomimetic wind turbine inspired by \textit{Dryobalanops aromatica} seed: numerical prediction of rigid rotor blade performance with OpenFOAM\(^{\circledR}\) (Q1648633) (← links)
- Simulation of micro-flow dynamics at low capillary numbers using adaptive interface compression (Q1649665) (← links)
- Generation of divergence free synthetic inflow turbulence with arbitrary anisotropy (Q1649673) (← links)
- Comparison of computational codes for direct numerical simulations of turbulent Rayleigh-Bénard convection (Q1649693) (← links)
- Consistent second-order time-accurate non-iterative PISO-algorithm (Q1649715) (← links)
- Development of a new openfoam solver using regularized gas dynamic equations (Q1649732) (← links)
- A finite area scheme for shallow granular flows on three-dimensional surfaces (Q1649736) (← links)
- Multi-dimensional finite volume scheme for the vorticity transport equations (Q1649764) (← links)
- Block-selective algebraic multigrid for implicitly coupled pressure-velocity system (Q1649783) (← links)
- Implicit boundary conditions for coupled solvers (Q1649848) (← links)
- Electro-vortex flow simulation using coupled meshes (Q1649861) (← links)
- Development of a parallelised fluid solver for problems with mesh interfaces and deforming domains (Q1649863) (← links)
- Large-eddy simulation of circular jet mixing: lip- and inner-ribbed nozzles (Q1649880) (← links)
- An aerodynamic design optimization framework using a discrete adjoint approach with OpenFOAM (Q1649884) (← links)
- An adaptive numerical method for free surface flows passing rigidly mounted obstacles (Q1653711) (← links)
- Combined numerical and experimental simulations of unsteady ship airwakes (Q1653727) (← links)
- Lubricated elastoplastic contact model for metal forming processes in OpenFOAM (Q1653759) (← links)
- Evaluation of the turbulence models for gas flow and particle transport in URANS and LES of a cyclone separator (Q1653767) (← links)
- A comparative study of boundary conditions for the density-based solvers in the framework of OpenFoam (Q1653768) (← links)
- Development of a coupled matrix-free LU-SGS solver for turbulent compressible flows (Q1653776) (← links)
- A stochastic multiple mapping conditioning computational model in openfoam for turbulent combustion (Q1653797) (← links)
- A novel stencil selection method for the gradient reconstruction on unstructured grid based on OpenFoam (Q1653798) (← links)
