Pages that link to "Item:Q4331340"

The following pages link to Upper bound limit analysis using linear finite elements and non-linear programming (Q4331340):

Displaying 50 items.

• A reliable incremental method of computing the limit load in deformation plasticity based on compliance: continuous and discrete setting (Q269379) (← links)
• Upper-bound limit analysis based on the natural element method (Q315339) (← links)
• Element integration method for upper bound limit analysis (Q366593) (← links)
• Lower bound limit analysis by BEM: convex optimization problem and incremental approach (Q463646) (← links)
• The use of QP-free algorithm in the limit analysis of slope stability (Q544226) (← links)
• Failure in accretionary wedges with the maximum strength theorem: numerical algorithm and 2D validation (Q601261) (← links)
• A finite element procedure for rigorous numerical enclosures on the limit load in the analysis of multibody structures (Q658706) (← links)
• Stability of an unsupported vertical trench in sloping ground (Q828431) (← links)
• Upper bound limit analysis with a parallel mixed finite element formulation (Q835955) (← links)
• Failure modes and effective strength of two-phase materials determined by means of numerical limit analysis (Q925902) (← links)
• Hardness-packing density scaling relations for cohesive-frictional porous materials (Q957449) (← links)
• Limit analysis decomposition and finite element mixed method (Q984954) (← links)
• Bounds to shakedown loads for a class of deviatoric plasticity models (Q1015602) (← links)
• Stress-based upper-bound method and convex optimization: case of the Gurson material (Q1022119) (← links)
• Efficient upper-bound limit analysis (Q1111063) (← links)
• The upper bound on the collapse load of plate bending by using a quasi- conforming element and the Monte Carlo method (Q1261561) (← links)
• Numerical prediction of ultimate loads: Case of von Mises and Tresca materials (Q1329836) (← links)
• Limit analysis for a general class of yield conditions (Q1574203) (← links)
• A new technique for finite element limit-analysis of Hill materials, with an application to the assessment of criteria for anisotropic plastic porous solids (Q1617876) (← links)
• Displacement and equilibrium mesh-free formulation based on integrated radial basis functions for dual yield design (Q1655167) (← links)
• An adaptive selective ES-FEM for plastic collapse analysis (Q1658118) (← links)
• Efficient numerical computations of yield stress fluid flows using second-order cone programming (Q1667464) (← links)
• An edge-based finite element method (ES-FEM) with adaptive scaled-bubble functions for plane strain limit analysis (Q1798604) (← links)
• A discontinuous quasi-upper bound limit analysis approach with sequential linear programming mesh adaptation (Q1953266) (← links)
• An adaptive strategy based on conforming quadtree meshes for kinematic limit analysis (Q1986637) (← links)
• An algorithm for adaptive introduction and arrangement of velocity discontinuities within 3D finite-element-based upper bound limit analysis approaches (Q1987940) (← links)
• Upper bound limit analysis using the weak form quadrature element method (Q2295232) (← links)
• A polytree-based adaptive approach to limit analysis of cracked structures (Q2308788) (← links)
• Advances in the simulation of viscoplastic fluid flows using interior-point methods (Q2310212) (← links)
• Smoothed finite element approach for kinematic limit analysis of cohesive frictional materials (Q2422427) (← links)
• An upper-bound limit analysis of Mindlin plates using CS-DSG3 method and second-order cone programming (Q2515087) (← links)
• Upper bound limit analysis using discontinuous velocity fields (Q2564590) (← links)
• Second-order cone programming formulation for consolidation analysis of saturated porous media (Q2630805) (← links)
• A novel augmented Lagrangian-based formulation for upper-bound limit analysis (Q2894965) (← links)
• Associated computational plasticity schemes for nonassociated frictional materials (Q2895032) (← links)
• Application of an elastoplastic spectral element method to 3D slope stability analysis (Q2911852) (← links)
• 3D-FEM formulations of limit analysis methods for porous pressure-sensitive materials (Q2952336) (← links)
• Locking-free discontinuous finite elements for the upper bound yield design of thick plates (Q2952799) (← links)
• Lower bound limit analysis using finite elements and linear programming (Q3030399) (← links)
• A cell-based smoothed finite element method for kinematic limit analysis (Q3062565) (← links)
• Remarks on some properties of conic yield restrictions in limit analysis (Q3064228) (← links)
• (Q3117397) (← links)
• The use of an SQP algorithm in slope stability analysis (Q3159440) (← links)
• A new discontinuous upper bound limit analysis formulation (Q3376610) (← links)
• Limit analysis and convex programming: A decomposition approach of the kinematic mixed method (Q3549756) (← links)
• A non-linear programming method approach for upper bound limit analysis (Q3588062) (← links)
• Mesh adaptive computation of upper and lower bounds in limit analysis (Q3590401) (← links)
• Upper and lower bounds in limit analysis: Adaptive meshing strategies and discontinuous loading (Q3614720) (← links)
• Lower-bound limit analysis by using the EFG method and non-linear programming (Q3623705) (← links)
• Computation of collapse states with von Mises type yield condition (Q3835889) (← links)