Pages that link to "Item:Q740214"
From MaRDI portal
The following pages link to Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures (Q740214):
Displaying 14 items.
- Thermomechanical coupling in the elastic regime and elasto-plastic transition during tension of austenitic steel, titanium and aluminium alloy at strain rates from 10\(^{-4}\) to 10\(^{-1}\) s\(^{-1}\) (Q340216) (← links)
- Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy (Q415317) (← links)
- Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP) (Q422532) (← links)
- Anisotropic response of high-purity \(\alpha \)-titanium: experimental characterization and constitutive modeling (Q422581) (← links)
- Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures (Q997016) (← links)
- Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: Synthesis, experiment, and constitutive modeling (Q1013918) (← links)
- Stress-strain behaviour of aluminium alloys at a wide range of strain rates (Q1043431) (← links)
- The influence of crystal structure on the dynamic behavior of materials at high temperatures. (Q1413994) (← links)
- An anisotropic elastoplastic constitutive formulation generalised for orthotropic materials (Q1790140) (← links)
- Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys (Q1882869) (← links)
- Effects of temperature and effective strain on the flow behavior of Ti--6Al--4V (Q1933530) (← links)
- The characteristics of plastic flow and a physically-based model for 3003 Al-Mn alloy upon a wide range of strain rates and temperatures (Q1949058) (← links)
- Predicting hot deformation behaviors under multiaxial loading using the Gurson-Tvergaard-Needleman damage model for Ti-6Al-4V alloy sheets (Q2035202) (← links)
- MPM simulations of high-speed machining of Ti6Al4V titanium alloy considering dynamic recrystallization phenomenon and thermal conductivity (Q2295229) (← links)
