| Publication | Date of Publication | Type |
|---|
| Distributed dislocation problems in wedge shaped domains | 2023-03-17 | Paper |
| Interaction of a parabolic notch with a generalized singularity | 2022-06-17 | Paper |
| Mechanics of fretting and fretting fatigue | 2022-05-10 | Paper |
| Half-plane contact problems in partial slip with varying normal and tangential loads | 2022-05-03 | Paper |
| Interfacial slip and creep in rolling contact incorporating a cylinder with an elastic layer | 2021-06-21 | Paper |
| Contact of a rigid cylinder indenting an elastic layer sliding over a rigid substrate | 2021-06-21 | Paper |
| An idealised description of the frictional receding contact behaviour of a bolted joint | 2020-06-18 | Paper |
| The axisymmetric shrink fit problem subjected to torsion | 2020-05-27 | Paper |
| The axisymmetric frictional receding contact of a layer pressed against a half-space by pressure outside a disk | 2019-09-30 | Paper |
| The axisymmetric shrink fit problem subjected to axial force | 2018-10-08 | Paper |
| Determination of the shakedown limit for large, discrete frictional systems | 2018-09-03 | Paper |
| Skew sliding of an elastic cylinder: an investigation of convection in contact | 2013-06-07 | Paper |
| Sliding of general frictional complete contacts | 2013-06-07 | Paper |
| The penny crack beneath the surface of a half-space: with application to the blister test | 2010-10-28 | Paper |
| Asymptotic characterisation of nearly-sharp notch root stress fields | 2010-10-12 | Paper |
| Separation and slip at the edge of a complete contact: an asymptotic solution | 2010-10-12 | Paper |
| A comparison of two and three-dimensional analyses of fatigue crack closure | 2010-09-16 | Paper |
| Closure at the root of a sharp notch | 2010-08-11 | Paper |
| Torsional contact of an elastic flat-ended cylinder | 2009-10-01 | Paper |
| Frictional complete contacts between elastically similar bodies subject to normal and shear load | 2009-09-10 | Paper |
| The effect of path cut on Somigliana ring dislocations in a half-space | 2009-08-26 | Paper |
| An investigation of convection effects in complete and almost complete contact problems | 2009-08-21 | Paper |
| The effect of path cut on Somigliana ring dislocation elastic fields | 2009-08-06 | Paper |
| The screw dislocation in a three-quarter plane | 2008-10-22 | Paper |
| The application of asymptotic solutions to contact problems characterised by logarithmic singularities | 2008-10-22 | Paper |
| The state of stress induced by ring dislocations in a semi-infinite stepped shaft | 2008-04-07 | Paper |
| Contact of a rotating wheel with a flat | 2007-11-08 | Paper |
| Slip zone length at the edge of a complete contact | 2007-11-08 | Paper |
| General results for complete contacts subject to oscillatory shear | 2007-10-29 | Paper |
| A semi-infinite chamfered contact solution and its application to almost complete contacts | 2007-10-17 | Paper |
| The finite and semi-infinite tilted, flat but rounded punch | 2007-10-15 | Paper |
| Analysis of a Rocking and Walking Punch—Part I: Initial Transient and Steady State | 2007-06-01 | Paper |
| Comprehensive bounded asymptotic solutions for incomplete contacts in partial slip | 2006-10-10 | Paper |
| The edge dislocation in a three-quarter plane. II: Application to an edge crack | 2006-08-14 | Paper |
| The edge dislocation in a three-quarter plane. I: Influence functions | 2006-03-16 | Paper |
| The tilted shallow wedge problem | 2005-12-05 | Paper |
| Bounded asymptotic solutions for incomplete contacts in partial slip | 2005-11-22 | Paper |
| https://portal.mardi4nfdi.de/entity/Q4826538 | 2004-11-11 | Paper |
| The application of asymptotic solutions to characterising the process zone in almost complete frictional contacts. | 2004-05-27 | Paper |
| The evolution of the process zone when a complete contact is subject to cyclically varying loads. | 2004-03-14 | Paper |
| The application of asymptotic solutions to characterising the process zone in almost complete frictionless contacts. | 2004-01-26 | Paper |
| Asymptotic results for slipping complete frictional contacts | 2004-01-14 | Paper |
| A method based on asymptotics for the refined solution of almost complete partial slip contact problems | 2004-01-14 | Paper |
| The use of closure maps to characterise plasticity induced crack closure | 2003-11-25 | Paper |
| The influence of an edge radius on the local stress field at the edge of a complete fretting contact | 2003-03-11 | Paper |
| https://portal.mardi4nfdi.de/entity/Q4861073 | 2003-01-08 | Paper |
| A shrink-fit shaft subject to torsion | 2002-09-05 | Paper |
| A flat punch pressed against an elastic interlayer under conditions of slip and separation | 2002-09-03 | Paper |
| Note on the complete contact between a flat rigid punch and an elastic layer attached to a dissimilar substrate | 2002-09-03 | Paper |
| Characterising the process zone in complete fretting contacts using plain fatigue sharp V-notch specimens | 2002-08-25 | Paper |
| A generalised stress intensity approach to characterising the process zone in complete fretting contacts | 2002-08-04 | Paper |
| An asymptotic approach to crack initiation in fretting fatigue of complete contacts | 2002-06-27 | Paper |
| The tilted punch under normal and shear load (with application to fretting tests) | 2001-10-10 | Paper |
| A theoretical investigation of sharp indentation testing of a nearly-brittle material, with some experimental results | 2001-01-17 | Paper |
| A shrink-fitted peg subjected to a tensile load | 2001-01-01 | Paper |
| Some observations on oscillating tangential forces and wear in general plane contacts | 2000-09-13 | Paper |
| A fundamental dislocation solution for an infinite plate with application to related crack problems | 2000-07-02 | Paper |
| Analysis of plane and rough contacts, subject to a shearing force | 2000-03-02 | Paper |
| Formulation and implementation of the eigenstrain method employing higher order elements | 2000-01-26 | Paper |
| Contact problems for a wedge with rounded apex | 2000-01-17 | Paper |
| A note on convective effects in elastic contact problems for dissimilar materials | 1999-11-29 | Paper |
| Modelling of growth of three-dimensional cracks by a continuous distribution of dislocation loops | 1999-06-15 | Paper |
| https://portal.mardi4nfdi.de/entity/Q4872008 | 1996-08-13 | Paper |
| Mechanics of fretting fatique | 1996-04-08 | Paper |
| https://portal.mardi4nfdi.de/entity/Q4872009 | 1996-04-08 | Paper |
| Contact mechanics of wedge and cone indenters | 1995-05-14 | Paper |
| Static Axisymmetric Hertzian Contacts Subject to Shearing Forces | 1994-12-06 | Paper |
| Eigenstrain methods in three-dimensional crack problems: An alternative integration procedure | 1993-09-05 | Paper |
| Interface cracks | 1993-05-16 | Paper |
| Calculation of the opening displacement of surface-breaking plane cracks | 1993-04-01 | Paper |
| The Hertzian Cone Crack | 1993-01-16 | Paper |
| The analysis of three-dimensional cracks generated by sharp indentation | 1990-01-01 | Paper |
| Axial sliding of cylinders | 1990-01-01 | Paper |
| The stresses induced in a semi‐infinite elastic body by axi‐symmetric pressure | 1989-01-01 | Paper |
| Contact of dissimilar elastic cylinders under normal and tangential loading | 1988-01-01 | Paper |
| Tractive rolling of dissimilar elastic cylinders | 1988-01-01 | Paper |
| Contour integration: an integral evaluated | 1988-01-01 | Paper |
| Mechanics of fretting fatigue tests | 1987-01-01 | Paper |
| Steady sliding of a circular cylinder over a dissimilar thermally conducting half-plane | 1986-01-01 | Paper |
| An analysis of fretting fatigue cracks during loading phase | 1985-01-01 | Paper |
| The stresses due to the contact of dissimilar bodies | 1985-01-01 | Paper |
| On the integral of a certain incomplete elliptic integral | 1984-01-01 | Paper |
