Comparison of the work-hardening of metallic sheets using tensile and shear strain paths
From MaRDI portal
Publication:1013921
DOI10.1016/j.ijplas.2008.07.002zbMath1419.74091OpenAlexW1969623769MaRDI QIDQ1013921
Publication date: 23 April 2009
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2008.07.002
C. mechanical testingB. anisotropic materialB. finite strainB. elasto-viscoplastic materialB. metallic materials
Anisotropy in solid mechanics (74E10) Experimental work for problems pertaining to mechanics of deformable solids (74-05) Plastic materials, materials of stress-rate and internal-variable type (74C99)
Related Items
Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures ⋮ A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming ⋮ Dislocation impediment by the grain boundaries in polycrystals
Cites Work
- Unnamed Item
- Unnamed Item
- Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification
- Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming
- Study on the influence of work-hardening modeling in springback prediction
- Anisotropic work hardening of steel sheets under plane stress
- Investigation of advanced strain-path dependent material models for sheet metal forming simulations
- Elastoviscohysteresis constitutive law in convected coordinate frames: application to finite deformation shear tests.
- Ratchetting process in the stainless steel AISI 316L at 300 K: An experimental investigation.
- Role of plastic anisotropy and its evolution on springback
- Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain
- Inelastic effects on springback in metals
- Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. II: Characterization of material properties
- Predicting springback in sheet metal forming: An explicit to implicit sequential solution procedure
- Incorporation of yield surface distortion in finite deformation constitutive modeling of rigid-plastic hardening materials based on the Hencky logarithmic strain
- Rotation of axes for anisotropic metal in FEM simulations
- Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets
- An orthotropic yield criterion in a 3-D general stress state
- A plane stress anisotropic plastic flow theory for orthotropic sheet metals
- A constitutive model with three plastic constants: the description of anisotropic workhardening
- Modeling multi-axial deformation of planar anisotropic elasto-plastic materials. I: Theory
- Modeling multi-axial deformation of planar anisotropic elasto-plastic materials. II: Applications
- Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets
- A theory of the yielding and plastic flow of anisotropic metals
- A new model for springback prediction in which the Bauschinger effect is considered
- Some issues about anisotropic elastic-plastic models at finite strain.
