Biaxial loading of continuously graded thermoviscoplastic materials
DOI10.1007/s00466-006-0030-4zbMath1163.74009OpenAlexW2056179283MaRDI QIDQ1015549
George Chatzigeorgiou, Vassilios K. Kalpakides, Nicolas Ch. Charalambakis
Publication date: 8 May 2009
Published in: Computational Mechanics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s00466-006-0030-4
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Analytic approximation of solutions (perturbation methods, asymptotic methods, series, etc.) of dynamical problems in solid mechanics (74H10) Inhomogeneity in solid mechanics (74E05) Finite element methods applied to problems in solid mechanics (74S05) Thermal effects in solid mechanics (74F05)
Related Items (2)
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Integral equations with hypersingular kernels--theory and applications to fracture mechanics
- Effect of thermal softening in shearing of strain-rate dependent materials
- Steady state penetration of thermoviscoplastic targets
- Stability conditions and numerical solutions on oscillatory thermoviscous shearing
- Perturbation analysis of thermoviscoplastic instabilities in biaxial loading
- Approximation by finite elements, existence and uniqueness for a model of stratified thermoviscoplastic materials
- Time-asymptotic stability of non-Newtonian fluid or plastic solid
- Plastic shearing of materials exhibiting strain hardening or strain softening
- Onset of shear localization in viscoplastic solids
- Forming limit predictions with the perturbation method using stress potential functions of polycrystal viscoplasticity
- Thermoplastic instability in simple shear
- Localized necking in thin sheets
- Bifurcation phenomena in the plane tension test
- Numerical simulation of two-dimensional wave propagation in functionally graded materials.
- Adiabatic shearing of non-homogeneous thermoviscoplastic materials.
- Three-dimensional analysis of transient thermal stresses in functionally graded plates
- A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals
- Adiabatic shear banding in high speed machining of Ti-6Al-4V: Experiments and modeling
- Cohesive zone modeling of dynamic failure in homogeneous and functionally graded materials
- Adiabatic shear banding in plane strain tensile deformations of 11 thermoelastoviscoplastic materials with finite thermal wave speed
- Global existence and numerical approximation in adiabatic shearing of incompressible fluids.
- Analysis of the dynamic propagation of adiabatic shear bands
- Damage model for metal--matrix composite under high intensity loading.
- Higher-order theory for periodic multiphase materials with inelastic phases.
- Adiabatic shear localization in the dynamic punch test. I: Experimental investigation
- Cracks problem for non-homogeneous composite material subjected to dynamic loading
- Stress-strain fields and the effectiveness shear properties for three-phase composites with imperfect interface
- Instability analysis of non-homogeneous materials under biaxial loading
- Multiscale dislocation dynamics simulations of shock compression in copper single crystal
- The Axisymmetric Crack Problem in a Nonhomogeneous Medium
- Gradient Elasticity Theory for Mode III Fracture in Functionally Graded Materials—Part I: Crack Perpendicular to the Material Gradation
- A Second Look at the Higher-Order Theory for Periodic Multiphase Materials
- Adiabatic shearing of incompressible fluids with temperature-dependent viscosity
- Analytical Characterization of Shear Localization in Thermoviscoplastic Materials
- Weak solutions to the initial-boundary value problem for the shearing of non-homogeneous thermoviscoplastic materials
- An Axisymmetric Crack in Bonded Materials With a Nonhomogeneous Interfacial Zone Under Torsion
- Homogenization of stratified thermoviscoplastic materials
- A theory of the yielding and plastic flow of anisotropic metals
This page was built for publication: Biaxial loading of continuously graded thermoviscoplastic materials
