Homogenization of a pressurized tube made of elastoplastic materials with discontinuous properties
DOI10.1016/j.ijsolstr.2009.07.015zbMath1176.74147OpenAlexW2046068146MaRDI QIDQ1043442
George Chatzigeorgiou, François Murat, Nicolas Ch. Charalambakis
Publication date: 9 December 2009
Published in: International Journal of Solids and Structures (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijsolstr.2009.07.015
Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials) (74C05) Effective constitutive equations in solid mechanics (74Q15) Homogenization in equilibrium problems of solid mechanics (74Q05)
Related Items (2)
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Optimizing the composition profile of a functionally graded interlayer using a direct transcription method
- Homogenization problems of a hollow cylinder made of elastic materials with discontinuous properties
- Biaxial loading of continuously graded thermoviscoplastic materials
- Parametric finite-volume micromechanics of periodic materials with elastoplastic phases
- Effect of nonhomogeneity on yield stress in a thick-walled cylindrical tube under pressure
- Adiabatic shear banding in a thick-walled steel tube
- A re-visit of a cylindrically anisotropic tube subjected to pressuring, shearing, torsion, extension and a uniform temperature change
- On repeated adiabatic shear band formation during high-speed machining.
- Adiabatic shear banding in plane strain tensile deformations of 11 thermoelastoviscoplastic materials with finite thermal wave speed
- A state space formalism for anisotropic elasticity. II: Cylindrical anisotropy.
- The pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials
- The stress response of functionally graded isotropic linearly elastic rotating disks
- Continuum micro-mechanics of elastoplastic polycrystals
- Damage Induced Stress-Softening in the Torsion, Extension and Inflation of a Cylindrical Tube
- Geometrically non-linear thermoelastic analysis of functionally graded shells using finite element method
- LAPACK Users' Guide
- Exact solutions of a piezoelectric circular tube or bar under extension, torsion, pressuring, shearing, uniform electric loading and temperature change
- Elasto‐plastic solutions of engineering problems ‘initial stress’, finite element approach
- Laminated composite tubes under extension, torsion, bending, shearing and pressuring: A state space approach
This page was built for publication: Homogenization of a pressurized tube made of elastoplastic materials with discontinuous properties
