Direct limit analysis via rigid-plastic finite elements
From MaRDI portal
Publication:1228391
DOI10.1016/0045-7825(76)90054-2zbMath0333.73032OpenAlexW2093521133MaRDI QIDQ1228391
Publication date: 1976
Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/0045-7825(76)90054-2
Anelastic fracture and damage (74R20) Finite element methods applied to problems in solid mechanics (74S05)
Related Items
Limit analysis considering initial constant loadings and proportional loadings ⋮ The integral yield criterion of finite elements and its application of limit analysis and optimization problems of thin-walled elastic-plastic structures ⋮ Investigation of rotating hollow cylinders of strain-hardening viscoplastic materials by sequential limit analysis ⋮ Limit state solutions, based upon linear elastic solutions with a spatially varying elastic modulus ⋮ Upper bound limit analysis of plates utilizing the C1 natural element method ⋮ On a numerical approach to shakedown analysis of structures ⋮ Finite element equilibrium analysis of creep using the mean value of the equivalent shear modulus ⋮ A finite element formulation for shakedown problems using a yield criterion of the mean ⋮ An upper-bound limit analysis of Mindlin plates using CS-DSG3 method and second-order cone programming ⋮ The Equilibrium Cell-Based Smooth Finite Element Method for Shakedown Analysis of Structures ⋮ Limit analysis of plates using the EFG method and second-order cone programming ⋮ Analytical and numerical investigation of strain-hardening viscoplastic thick-walled cylinders under internal pressure by using sequential limit analysis ⋮ Derivation of variational principles for rigid-plastic solids obeying non-associated flow laws. I. Further development of the nonlinear method of adding the adjoint operator, prescribed jumps
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Plastic yielding of notched strips under conditions of plane stress
- The use of optimization techniques in the analysis of cracked members by the finite element displacement and stress methods
- Curved, isoparametric, 'quadrilateral' elements for finite element analysis
- Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method
- Variational principles for elastic plates with relaxed continuity requirements
- A quadratic programming approach for certain classes of non linear structural problems
- A variational theorem for Mises' solids based on stress potentials
- A new variational principle for finite elastic displacements
- A general variational theorem for the rate problem in elasto-plasticity
- Finite element limit analysis using linear programming
- A modified gradient method for finite element elastoplastic analysis by quadratic programming
- On limit analysis of plates
- Application of variational principles to limit analysis
- Numerical Methods for the Limit Analysis of Plates
- Elasto‐plastic stress analysis. A generalization for various contitutive relations including strain softening
- Elastic‐plastic analysis of Saint‐Venant torsion problem by a hybrid stress model
- Elasto‐plastic solutions of engineering problems ‘initial stress’, finite element approach
- A finite element, linear programming methods for the limit analysis of thin plates
- Basis of finite element methods for solid continua
- A generalization of the direct-stiffness method of structural analysis
- On a Variational Theorem in Elasticity
- Soil mechanics and plastic analysis or limit design
This page was built for publication: Direct limit analysis via rigid-plastic finite elements
