Cohesive zone modeling of crack nucleation at bimaterial corners

DOI10.1016/S0022-5096(99)00052-6zbMath0963.74503MaRDI QIDQ1573091

Kenneth M. Liechti, Ilyas Mohammed

Publication date: 18 February 2001

Published in: Journal of the Mechanics and Physics of Solids (Search for Journal in Brave)

Mathematics Subject Classification ID

Anelastic fracture and damage (74R20) Experimental work for problems pertaining to mechanics of deformable solids (74-05)

Related Items

Strength or toughness? A criterion for crack onset at a notch ⋮ Failure initiation in an epoxy joint between two steel plates ⋮ Extraction of cohesive-zone laws from elastic far-fields of a cohesive crack tip: A field projection method. ⋮ Cohesive models for damage evolution in laminated composites ⋮ A cohesive law for carbon nanotube/polymer interfaces based on the van der Waals force ⋮ Comparison between cohesive zone models ⋮ Fracture initiation at three-dimensional bimaterial interface corners. ⋮ Mixed-mode, time-dependent rubber/metal debonding ⋮ Strength scaling of adhesive joints in polymer-matrix composites ⋮ A failure criterion for brittle elastic materials under mixed-mode loading ⋮ Cohesive-zone laws for void growth. I: Experimental field projection of crack-tip crazing in glassy polymers ⋮ Cohesive modeling of crack nucleation under diffusion-induced stresses in a thin strip: implications on the critical size for flaw tolerant battery electrodes ⋮ A continuum damage model for delaminations in laminated composites. ⋮ Constraint effects in adhesive joint fracture ⋮ Adhesion and pull-off force of an elastic indenter from an elastic half-space ⋮ Numerical modelling and experimental validation of dynamic fracture events along weak planes ⋮ Application of bimaterial interface corner failure mechanics to silicon/glass anodic bonds ⋮ Investigation of a crack situated in a thin adhesive layer between two different isotropic materials

Cites Work

• The relation between crack growth resistance and fracture process parameters in elastic-plastic solids
• The influence of plasticity on mixed mode interface toughness
• The intrinsic toughness and adhesion mechanisms of a glass/epoxy interface
• A Continuum Model for Void Nucleation by Inclusion Debonding