Limit analysis for a general class of yield conditions

DOI10.1016/S0997-7538(00)00170-4zbMath0978.74066OpenAlexW2070415074WikidataQ126780651 ScholiaQ126780651MaRDI QIDQ1574203

Paolo Fuschi, Markus Engelhardt, Alan R. S. Ponter

Publication date: 7 February 2002

Published in: European Journal of Mechanics. A. Solids (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/s0997-7538(00)00170-4

zbMATH Keywords

convergencefinite element code ABAQUShydrostatic pressurerigid/perfectly plastic materialvon Mises effective stressnonlinear programming methodDrucker-Prager yield conditionlife assessmentoptimal upper bounds on limit load

Mathematics Subject Classification ID

Applications of mathematical programming (90C90) Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials) (74C05) Anelastic fracture and damage (74R20) Finite element methods applied to problems in solid mechanics (74S05)

Related Items (22)

An iterative elastic SBFE approach for collapse load analysis of inelastic structures ⋮ Evaluation of the convergent properties of the linear matching method for computing the collapse of structural components ⋮ Automatic Adaptive Recovery Stress ES-FEM for Lower-Bound Limit Load Analysis of Structures ⋮ Microscopic limit analysis of cohesive-frictional composites with non-associated plastic flow ⋮ Creep rupture assessment by a robust creep data interpolation using the linear matching method ⋮ Limit and shakedown isogeometric analysis of structures based on Bézier extraction ⋮ Extension of the linear matching method to frame structures made from a material that exhibits softening ⋮ An optimal control approach to the analysis of inelastic structures under cyclic loading ⋮ Post-collapse analysis of plates and shells based on a rigid-plastic version of the TRIC element. ⋮ A nonlinear programming approach to limit analysis of non-associated plastic flow materials ⋮ Direct Evaluation of Limits in Plasticity and Creep Deformation ⋮ Sequential elastic recovery stress edge-smoothed finite element method for lower-bound limit determination of structures ⋮ A basis reduction method using proper orthogonal decomposition for shakedown analysis of kinematic hardening material ⋮ A direct method to predict cyclic steady states of elastoplastic structures ⋮ A 3D finite element with planar symmetry for limit analysis computations ⋮ Extension of the linear matching method to geotechnical problems ⋮ A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit ⋮ A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading ⋮ Analysis of problems in elasto-plasticity via an adaptive FEM-BEM coupling method ⋮ Finite element limit analysis of anisotropic structures ⋮ An adaptive domain decomposition coupled finite element-boundary element method for solving problems in elasto-plasticity ⋮ Adaptive XIGA shakedown analysis for problems with holes

Uses Software

• ABAQUS

This page was built for publication: Limit analysis for a general class of yield conditions