Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)

DOI10.1016/j.compfluid.2016.02.021zbMath1390.76689OpenAlexW2309992065MaRDI QIDQ1648083

Yuto Otoguro, Tayfun E. Tezduyar, Takuya Terahara, Takashi Kuraishi, Kenji Takizawa, Hitoshi Hattori

Publication date: 27 June 2018

Published in: Computers and Fluids (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.compfluid.2016.02.021

zbMATH Keywords

Isogeometric AnalysisIGATurbineST-SIST-VMSHigher-order functionsSpace-Time Variational Multiscale methodST Slip Interface methodTurbocharger

Mathematics Subject Classification ID

Related Items (71)

Isogeometric analysis for non-classical Bernoulli-Euler beam model incorporating microstructure and surface energy effects ⋮ A smoothed finite element approach for computational fluid dynamics: applications to incompressible flows and fluid-structure interaction ⋮ Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations ⋮ Wind turbine wake computation with the ST-VMS method and isogeometric discretization: directional preference in spatial refinement ⋮ Computational thermo-fluid analysis of a disk brake ⋮ Space–Time Flow Computation with Contact Between the Moving Solid Surfaces ⋮ Space–Time Computational FSI and Flow Analysis: 2004 and Beyond ⋮ Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC) ⋮ Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA) ⋮ FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow ⋮ Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods ⋮ Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method ⋮ Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling ⋮ Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change ⋮ Anatomically realistic lumen motion representation in patient-specific space-time isogeometric flow analysis of coronary arteries with time-dependent medical-image data ⋮ Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method ⋮ The actuator line method for wind turbine modelling applied in a variational multiscale framework ⋮ Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework ⋮ Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. II: Spatial and temporal resolution ⋮ A numerical formulation for cavitating flows around marine propellers based on variational multiscale method ⋮ Space-time computations in practical engineering applications: a summary of the 25-year history ⋮ Tire aerodynamics with actual tire geometry, road contact and tire deformation ⋮ Aorta zero-stress state modeling with T-spline discretization ⋮ Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity ⋮ Carrier-domain method for high-resolution computation of time-periodic long-wake flows ⋮ Isogeometric discretization methods in computational fluid mechanics ⋮ Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization ⋮ Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time ⋮ Fluid–structure interaction modeling with nonmatching interface discretizations for compressible flow problems: Computational framework and validation study ⋮ High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces ⋮ Variational multiscale method stabilization parameter calculated from the strain-rate tensor ⋮ Space-time computational flow analysis: unconventional methods and first-ever solutions ⋮ T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation ⋮ A new formulation for air-blast fluid-structure interaction using an immersed approach. I: Basic methodology and FEM-based simulations ⋮ Isogeometric analysis of ice accretion on wind turbine blades ⋮ An efficient solver for space-time isogeometric Galerkin methods for parabolic problems ⋮ Computational and experimental investigation of free vibration and flutter of bridge decks ⋮ Computational Cardiovascular Analysis with the Variational Multiscale Methods and Isogeometric Discretization ⋮ ALE and Space–Time Variational Multiscale Isogeometric Analysis of Wind Turbines and Turbomachinery ⋮ Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies ⋮ Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization ⋮ Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis ⋮ Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization ⋮ Using ALE-VMS to compute aerodynamic derivatives of bridge sections ⋮ U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization ⋮ A coupled 3D isogeometric and discrete element approach for modeling interactions between structures and granular matters ⋮ Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine ⋮ Medical-image-based aorta modeling with zero-stress-state estimation ⋮ Stability and error estimates for the successive-projection technique with B-splines in time ⋮ A variational multiscale framework for atmospheric turbulent flows over complex environmental terrains ⋮ Foundations of space-time finite element methods: polytopes, interpolation, and integration ⋮ Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle ⋮ Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film ⋮ Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method ⋮ A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion ⋮ Space-time VMS isogeometric analysis of the Taylor-Couette flow ⋮ Space–time least–squares isogeometric method and efficient solver for parabolic problems ⋮ A new isogeometric Timoshenko beam model incorporating microstructures and surface energy effects ⋮ Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries ⋮ Computational analysis methods for complex unsteady flow problems ⋮ Methods for computation of flow-driven string dynamics in a pump and residence time ⋮ Space–time Isogeometric flow analysis with built-in Reynolds-equation limit ⋮ Modeling and simulation of bridge-section buffeting response in turbulent flow ⋮ A stabilized ALE method for computational fluid–structure interaction analysis of passive morphing in turbomachinery ⋮ Element length calculation in B-spline meshes for complex geometries ⋮ Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method ⋮ A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state ⋮ Variational multiscale framework for cavitating flows ⋮ Isogeometric blended shells for dynamic analysis: simulating aircraft takeoff and the resulting fatigue damage on the horizontal stabilizer

Uses Software

• SUPG

Cites Work

• Engineering analysis and design with ALE-VMS and space-time methods
• Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
• Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
• Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
• Computation of residence time in the simulation of pulsatile ventricular assist devices
• Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
• Space-time interface-tracking with topology change (ST-TC)
• Space-time fluid mechanics computation of heart valve models
• FSI analysis of the blood flow and geometrical characteristics in the thoracic aorta
• Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
• A variational multiscale method for particle-cloud tracking in turbomachinery flows
• Stabilized space-time computation of wind-turbine rotor aerodynamics
• Multiscale space-time fluid-structure interaction techniques
• NURBS-based isogeometric analysis for the computation of flows about rotating components
• Isogeometric fluid-structure interaction: Theory, algorithms, and computations
• Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
• Finite element computation of turbulent flows with the discontinuity-capturing directional dissipation (DCDD)
• SUPG finite element computation of inviscid supersonic flows with \(YZ \beta\) shock-capturing
• Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
• Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
• A DRD finite element formulation for computing turbulent reacting flows in gas turbine combustors
• Computation of inviscid supersonic flows around cylinders and spheres with the SUPG formulation and \(YZ\beta\) shock-capturing
• Improved discontinuity-capturing finite element techniques for reaction effects in turbulence computation
• Enhanced-discretization selective stabilization procedure (EDSSP)
• Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
• Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
• Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
• Finite elements in fluids: stabilized formulations and moving boundaries and interfaces
• Petrov-Galerkin formulations with weighting functions dependent upon spatial and temporal discretization: Applications to transient convection-diffusion problems
• Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
• Flow simulation and high performance computing
• Computational analysis of flow-driven string dynamics in turbomachinery
• Computational analysis of noise reduction devices in axial fans with stabilized finite element formulations
• Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent
• Fluid-structure interaction modeling of wind turbines: simulating the full machine
• Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
• Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
• SUPG and discontinuity-capturing methods for coupled fluid mechanics and electrochemical transport problems
• The shear-slip mesh update method
• Computer modeling techniques for flapping-wing aerodynamics of a locust
• SUPG finite element computation of compressible flows with the entropy and conservation variables formulations
• Stabilization and shock-capturing parameters in SUPG formulation of compressible flows
• Improving stability of stabilized and multiscale formulations in flow simulations at small time steps
• Space-time VMS computation of wind-turbine rotor and tower aerodynamics
• Particle tracking and particle-shock interaction in compressible-flow computations with the V-SGS stabilization and \(YZ\beta\) shock-capturing
• Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
• Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
• 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
• 3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades
• Stabilized finite element computation of NOx emission in aero-engine combustors
• SPACE–TIME FLUID–STRUCTURE INTERACTION METHODS
• ALE-VMS AND ST-VMS METHODS FOR COMPUTER MODELING OF WIND-TURBINE ROTOR AERODYNAMICS AND FLUID–STRUCTURE INTERACTION
• ST and ALE-VMS methods for patient-specific cardiovascular fluid mechanics modeling
• New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
• Multiscale space–time methods for thermo-fluid analysis of a ground vehicle and its tires
• ALE–VMS formulation for stratified turbulent incompressible flows with applications
• Space–time VMS method for flow computations with slip interfaces (ST-SI)
• Stabilized formulations for incompressible flows with thermal coupling
• Large eddy simulation of turbulent channel flows by the variational multiscale method
• Stabilized Finite Element Formulations for Incompressible Flow Computations
• Computation of moving boundaries and interfaces and stabilization parameters
• Computational Fluid–Structure Interaction
• CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
• SPACE–TIME VMS METHODS FOR MODELING OF INCOMPRESSIBLE FLOWS AT HIGH REYNOLDS NUMBERS
• STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
• METHODS FOR FSI MODELING OF SPACECRAFT PARACHUTE DYNAMICS AND COVER SEPARATION
• YZβ discontinuity capturing for advection‐dominated processes with application to arterial drug delivery
• Computation of inviscid compressible flows with the V‐SGS stabilization and YZβ shock‐capturing
• Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques

This page was built for publication: Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)