Comparison of two models for anisotropic hardening and yield surface evolution in bcc sheet steels
From MaRDI portal
Publication:1657744
DOI10.1016/j.euromechsol.2015.05.016zbMath1406.74152OpenAlexW1782728106MaRDI QIDQ1657744
Publication date: 14 August 2018
Published in: European Journal of Mechanics. A. Solids (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.euromechsol.2015.05.016
Anisotropy in solid mechanics (74E10) Large-strain, rate-independent theories of plasticity (including nonlinear plasticity) (74C15)
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Analysis of sheet metal formability through isotropic and kinematic hardening models
- An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel
- Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification
- Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations
- A crystal plasticity model for strain-path changes in metals
- Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes
- Experimental characterization and model identification of directional hardening effects in metals for complex strain path changes
- Investigation of advanced strain-path dependent material models for sheet metal forming simulations
- Quasi-static and dynamic shearing of sheet metals
- Effect of loading path on the evolution of yield surface for anisotropic metals subjected to large pre-strain
- A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase B.C.C. polycrystals
- Finite element modeling of plastic anisotropy induced by texture and strain-path change.
- A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals
- A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes
- On the modeling of hardening in metals during non-proportional loading
- Modelling of the internal stress in dislocation cell structures
- Elastic-Plastic Deformation at Finite Strains
- A theory of the yielding and plastic flow of anisotropic metals
- On the modelling of anisotropic elastic and inelastic material behaviour at large deformation
This page was built for publication: Comparison of two models for anisotropic hardening and yield surface evolution in bcc sheet steels
