A continuum damage model for delaminations in laminated composites.

DOI10.1016/S0022-5096(02)00075-3zbMath1100.74509MaRDI QIDQ1811768

Yanyan Li

Publication date: 17 June 2003

Published in: Journal of the Mechanics and Physics of Solids (Search for Journal in Brave)

zbMATH Keywords

compositesDelaminationInterfaceDamage modelContinuum damage mechanicsLaminated

Mathematics Subject Classification ID

Composite and mixture properties (74E30) Theories of fracture and damage (74A45)

Related Items (5)

Cohesive-frictional interface constitutive model ⋮ A robust interface finite element formulation for modeling brittle material failure problems ⋮ Phase-field fracture modeling for unidirectional fiber-reinforced polymer composites ⋮ A thermo-elasto-plastic model for a fiber-metal laminated beam with interfacial damage ⋮ Continuum damage mechanics based modeling progressive failure of woven-fabric composite laminate under low velocity impact

Uses Software

• ABAQUS/Standard

Cites Work

• The relation between crack growth resistance and fracture process parameters in elastic-plastic solids
• The influence of plasticity on mixed mode interface toughness
• Antiplane shear crack growth under quasistatic loading in a damaging material
• Quasi-impact damage initiation and growth of thick-section and toughened composite materials
• Formulation, identification and use of interface models in the numerical analysis of composite delamination
• Numerical simulations of fast crack growth in brittle solids
• Cohesive zone modeling of crack nucleation at bimaterial corners
• Modeling impact-induced delamination of woven fiber-reinforced composites with contact/cohesive laws
• Interfacial failures in a compressive shear strength test of glass/polymer laminates.
• Rate-dependent interface models: Formulation and numerical applications
• The effect of bond strength and loading rate on the conditions governing the attainment of intersonic crack growth along interfaces
• Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
• A Continuum Model for Void Nucleation by Inclusion Debonding
• The Continuous Damage Theory of Brittle Materials, Part 1: General Theory
• On the method of virtual crack extensions
• A continuum damage model for transverse matrix cracking in laminated fibre–reinforced composites
• Interface element including point‐to‐surface constraints for three‐dimensional problems with damage propagation
• General expressions for energy–release rates for delamination in composite laminates
• The mode I crack growth resistance of metallic foams.
• Mode separation of energy release rate for delamination in composite laminates using sublaminates
• Mixed-mode, time-dependent rubber/metal debonding

This page was built for publication: A continuum damage model for delaminations in laminated composites.