Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys

DOI10.1016/j.ijplas.2003.06.005zbMath1135.74300OpenAlexW2042615760MaRDI QIDQ1882869

Akhtar S. Khan, Rehan Kazmi, Yeong Sung Suh

Publication date: 1 October 2004

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2003.06.005

zbMATH Keywords

Constitutive behavior Kolsky bar Elastic-viscoplastic material Thermal softening Titanium alloy Split Hopkinson bar Finite dynamic strain High strain-rate response

Mathematics Subject Classification ID

Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Experimental work for problems pertaining to mechanics of deformable solids (74-05) Plastic materials, materials of stress-rate and internal-variable type (74C99) Statistical mechanics of metals (82D35)

Related Items (15)

Inelastic heat fraction estimation from two successive mechanical and thermal analyses and full-field measurements ⋮ A shear-modified cohesive-GTN model for shear failure at high strain rates ⋮ Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures ⋮ Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy ⋮ A plastic constitutive equation incorporating strain, strain-rate, and temperature ⋮ Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature ⋮ Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP) ⋮ Anisotropic response of high-purity \(\alpha \)-titanium: experimental characterization and constitutive modeling ⋮ Simulation of damage evolution in ductile metals undergoing dynamic loading conditions ⋮ Modeling of the thermal softening of metals under impact loads and their temperature-time correspondence ⋮ Thermo-mechanical large deformation responses of hydrogenated nitrile butadiene rubber (HNBR): experimental results ⋮ Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry ⋮ Predicting hot deformation behaviors under multiaxial loading using the Gurson-Tvergaard-Needleman damage model for Ti-6Al-4V alloy sheets ⋮ Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: Synthesis, experiment, and constitutive modeling ⋮ Диаграмма предельных деформаций при горячей листовой штамповке металлов. Обзор моделей материала, критериев вязкого разрушения и стандартных испытаний

This page was built for publication: Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys