Performance of transition model for predicting low \(Re\) aerofoil flows without/with single and simultaneous blowing and suction

DOI10.1016/j.euromechflu.2010.11.001zbMath1258.76109OpenAlexW2071712352MaRDI QIDQ1940502

M. Serdar Genç, Hüseyin Yapici, Ünver Kaẏnak

Publication date: 7 March 2013

Published in: European Journal of Mechanics. B. Fluids (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.euromechflu.2010.11.001

zbMATH Keywords

suctionblowingtransitionlaminar separation bubbleflow separation controlhot-wire anemometer

Mathematics Subject Classification ID

Experimental work for problems pertaining to fluid mechanics (76-05) Finite volume methods applied to problems in fluid mechanics (76M12) General aerodynamics and subsonic flows (76G25)

Related Items (4)

Computational fluid dynamics simulation of aerodynamic performance and flow separation by single element and slatted airfoils under rainfall conditions ⋮ Effect of the laminar separation bubble induced transition on the hydrodynamic performance of a hydrofoil ⋮ On the modelling turbulent transition in turbine cascades with flow separation ⋮ Validating the URANS shear stress transport γ −Re_θ model for low‐Reynolds‐number external aerodynamics

Uses Software

• FLUENT
• GAMBIT

Cites Work

• Numerical study of passive and active flow separation control over a NACA0012 airfoil
• Direct numerical simulation of flow separation around NACA 0012 airfoil
• DNS for flow separation control around an airfoil by pulsed jets
• Turbulent drag reduction by means of alternating suction and blowing jets
• Viscous-inviscid analysis of transonic and low Reynolds number airfoils
• Post-stall flow control on an airfoil by local unsteady forcing
• Simulation of Transition with a Two-Equation Turbulence Model

This page was built for publication: Performance of transition model for predicting low \(Re\) aerofoil flows without/with single and simultaneous blowing and suction