Numerical analysis of complex instability behaviour using incremental-iterative strategies
From MaRDI portal
Publication:1977093
DOI10.1016/S0045-7825(99)00044-4zbMath0967.74062OpenAlexW2002630266MaRDI QIDQ1977093
Adam Zdunek, Costin Pacoste, Anders B. Eriksson
Publication date: 9 May 2000
Published in: Computer Methods in Applied Mechanics and Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/s0045-7825(99)00044-4
finite elementsshellsbuckling modesmodal interactionsecondary bifurcationsfold linestangential stiffnessgeneralised path-following proceduresbasic equilibrium pathscritical subset pathsincremental-iterative strategiesmulti-parametric spaceparameter sensitivity analysesquasi-static conservative instability problems
Finite element methods applied to problems in solid mechanics (74S05) Bifurcation and buckling (74G60) Shells (74K25)
Related Items
Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum, On path-following methods for structural failure problems, Co-rotational beam elements with warping effects in instability problems, Application of the continuum shell finite element SHB8PS to sheet forming simulation using an extended large strain anisotropic elastic-plastic formulation, Analysis of strongly nonlinear systems by using HBM-AFT method and its comparison with the five-order Runge-Kutta method: application to Duffing oscillator and disc brake model, Improved minimal augmentation procedure for the direct computation of critical points., SOLUTION SURFACES AND GENERALIZED PATHS IN NON-LINEAR STRUCTURAL MECHANICS, EVALUATION OF THE FOLD LINE BY ASYMPTOTIC EXTRAPOLATION FOR STRUCTURAL ANALYSIS, Generalised path-following for well-behaved nonlinear structures, Finite element linear and nonlinear, static and dynamic analysis of structural elements – an addendum – A bibliography (1996‐1999), Element formulation and numerical techniques for stability problems in shells
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Boundary conditions and mode jumping in the buckling of a rectangular plate
- Buckling and post-buckling. Four lectures in experimental, numerical and theoretical solid mechanics based on talks given at the CISM-Meeting held in Udine, Italy, September 29 - October 3, 1985
- A quadratically convergent procedure for the calculation of stability points in finite element analysis
- Finite rotation analysis and consistent linearization using projectors
- Beam elements in instability problems
- Equilibrium subsets for multi-parametric structural analysis
- On the solution of mode jumping phenomena in thin-walled shell structures
- A nonlinear beam finite element for the post-buckling analysis of plane frames by Koiter's perturbation approach
- Direct evaluation of the `worst' imperfection shape in shell buckling
- Buckling of multilayered composite plates by natural shear deformation matrix theory
- Linear and geometrically nonlinear bending of isotropic and multilayered composite plates by the natural mode method
- Structural instability analyses based on generalised path-following
- Co-rotational flat facet triangular elements for shell instability analyses.
- The influence of imperfections on systems with coincident buckling loads
- A new method to compute perturbed bifurcations: Application to the buckling of imperfect elastic structures
- A path-following technique via an asymptotic-numerical method
- Characterization and Computation of Generalized Turning Points
- A general procedure for the direct computation of turning and bifurcation points
- On the Computation of Manifolds of Foldpoints for Parameter-Dependent Problems
- A Numerical Study of Mode Jumping of Rectangular Plates
- Folds in Solutions of Two Parameter Systems and Their Calculation. Part I
- Characterization and Computation of Singular Points with Maximum Rank Deficiency
- A beam finite element non-linear theory with finite rotations
- Evaluation of the constant strain triangle with drilling rotations
- Path following near bifurcation
- Initial post-buckling analysis with the spline finite-strip method
- Adaptive approximations in finite element structural analysis
- Role of p-version Q(p) and Q′(p) two-dimensional approximation functions in smooth and singular problems
- PERTURBATION APPROACH TO ELASTIC POST-BUCKLING ANALYSIS
- Performance of the h–p version of the finite element method with various elements
- Rank-deficient matrices as a computational tool
- Asymptotic post‐buckling analysis of rectangular plates by HC finite elements
- An asymptotic‐numerical method to compute the postbuckling behaviour of elastic plates and shells
- Algorithms for the Nonlinear Eigenvalue Problem
