Unified viscoplasticity model for type 316 stainless steel subjected to isothermal and anisothermal-mechanical loading
DOI10.1016/j.euromechsol.2022.104855zbMath1503.74016OpenAlexW4308461580MaRDI QIDQ2102684
Lang Lang, Xiaohui Chen, Shiji Liu, Yusong Tian, Lin Zhu
Publication date: 29 November 2022
Published in: European Journal of Mechanics. A. Solids (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.euromechsol.2022.104855
stress relaxationexperimental verificationABAQUS softwarecreep-fatigue analysiscyclic plastic behaviorimplicit stress integration algorithm
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Anisotropy in solid mechanics (74E10) Finite element methods applied to problems in solid mechanics (74S05) Experimental work for problems pertaining to mechanics of deformable solids (74-05) Thermal effects in solid mechanics (74F05)
Uses Software
Cites Work
- Unnamed Item
- New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron
- Consistent tangent operators for rate-independent elastoplasticity
- Numerical integration and FEM-implementation of a viscoplastic Chaboche-model with static recovery
- Constitutive equations for cyclic plasticity and cyclic viscoplasticity
- A review of some plasticity and viscoplasticity constitutive theories
- Time-independent constitutive theories for cyclic plasticity
- Constitutive modeling of strain range dependent cyclic hardening.
- Kinematic hardening model suitable for ratchetting with steady-state
- A viscoplastic constitutive model incorporating dynamic strain aging effect during cyclic deformation conditions
- Anatomy of coupled constitutive models for ratcheting simulation
- An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation
- A viscoplastic constitutive model for nickel-base superalloy. I: Kinematic hardening rule of anisotropic dynamic recovery
- A viscoplastic constitutive model for nickel-base superalloy. II: Modeling under anisothermal conditions
- An improved unified viscoplastic model for modelling low cycle fatigue and creep fatigue interaction loadings of 9--12\%Cr steel
- Viscoplastic constitutive modelling of the ratchetting behavior of 35CrMo steel under cyclic uniaxial tensile loading with a wide range of stress amplitude
- Convergence of the Newton-Raphson algorithm in elastic-plastic incremental analysis
- Fully implicit integration and consistent tangent modulus in elasto‐plasticity
- Implementation of cyclic plasticity models based on a general form of kinematic hardening
This page was built for publication: Unified viscoplasticity model for type 316 stainless steel subjected to isothermal and anisothermal-mechanical loading
