Backflow stabilization by deconvolution-based large eddy simulation modeling
DOI10.1016/j.jcp.2019.109103zbMath1453.76237OpenAlexW2984467898WikidataQ126863127 ScholiaQ126863127MaRDI QIDQ2223007
Francesca Di Massimo, Huijuan Xu, Alessandro Veneziani, Annalisa Quaini, Davide Baroli
Publication date: 28 January 2021
Published in: Journal of Computational Physics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.jcp.2019.109103
Finite difference methods applied to problems in fluid mechanics (76M20) Direct numerical and large eddy simulation of turbulence (76F65) Finite element methods applied to problems in fluid mechanics (76M10) Physiological flows (76Z05) Physiological flow (92C35)
Related Items (5)
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- A tangential regularization method for backflow stabilization in hemodynamics
- Patient-specific analysis of post-operative aortic hemodynamics: a focus on thoracic endovascular repair (TEVAR)
- Approximate deconvolution models of turbulence. Analysis, phenomenology and numerical analysis.
- A comparison of outlet boundary treatments for prevention of backflow divergence with relevance to blood flow simulations
- Modular nonlinear filter stabilization of methods for higher Reynolds numbers flow
- Finite element modelling of pulsatile blood flow in idealized model of human aortic arch: study of hypotension and hypertension
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Augmented Lagrangian method for constraining the shape of velocity profiles at outlet boundaries for three-dimensional finite element simulations of blood flow
- NETGEN: An advancing front 2D/3D-mesh generator based on abstract rules
- Modified Navier-Stokes equations for the outflow boundary conditions in hemodynamics
- A Stokes-residual backflow stabilization method applied to physiological flows
- Outflow boundary conditions for three-dimensional finite element modeling of blood flow and pressure in arteries
- Geometric multiscale modeling of the cardiovascular system, between theory and practice
- Numerical study of a regularization model for incompressible flow with deconvolution-based adaptive nonlinear filtering
- Leray and LANS-α modelling of turbulent mixing
- Finite-Element Approximation of the Nonstationary Navier–Stokes Problem. Part IV: Error Analysis for Second-Order Time Discretization
- A HIGH ACCURACY LERAY-DECONVOLUTION MODEL OF TURBULENCE AND ITS LIMITING BEHAVIOR
- Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities
- Finite Element Approximation of the Nonstationary Navier–Stokes Problem, Part II: Stability of Solutions and Error Estimates Uniform in Time
- Finite Element Approximation of the Nonstationary Navier–Stokes Problem III. Smoothing Property and Higher Order Error Estimates for Spatial Discretization
- Finite Element Approximation of the Nonstationary Navier–Stokes Problem. I. Regularity of Solutions and Second-Order Error Estimates for Spatial Discretization
- Fluid flow into a curved pipe
- Effective downstream boundary conditions for incompressible Navier–Stokes equations
- Analysis of a Geometrical Multiscale Model Based on the Coupling of ODE and PDE for Blood Flow Simulations
- Flow rate defective boundary conditions in haemodynamics simulations
- On the Sensitivity to the Filtering Radius in Leray Models of Incompressible Flow
- Numerical analysis and computational testing of a high accuracy Leray‐deconvolution model of turbulence
- Evolution of the wall shear stresses during the progressive enlargement of symmetric abdominal aortic aneurysms
- ARTIFICIAL BOUNDARIES AND FLUX AND PRESSURE CONDITIONS FOR THE INCOMPRESSIBLE NAVIER-STOKES EQUATIONS
- New efficient boundary conditions for incompressible Navier-Stokes equations : a well-posedness result
- Large Eddy Simulation for Incompressible Flows
This page was built for publication: Backflow stabilization by deconvolution-based large eddy simulation modeling