Accurate and locking-free analysis of beams, plates and shells using solid elements
From MaRDI portal
Publication:2241863
DOI10.1007/s00466-020-01969-0zbMath1490.74112OpenAlexW3122518089WikidataQ113326766 ScholiaQ113326766MaRDI QIDQ2241863
Sungchul Kim, Savvas Saloustros, Michele Chiumenti, Miguel Cervera
Publication date: 9 November 2021
Published in: Computational Mechanics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s00466-020-01969-0
mixed finite element methodB-bar methodnearly incompressible anisotropic materialstrain-displacement formulation
Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Anisotropy in solid mechanics (74E10) Plates (74K20) Finite element methods applied to problems in solid mechanics (74S05) Shells (74K25)
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Explicit mixed strain-displacement finite elements for compressible and quasi-incompressible elasticity and plasticity
- New stable mixed finite element approximations for problems in linear elasticity
- Mixed stabilized finite element methods in nonlinear solid mechanics. I: Formulation
- Finite element modeling of quasi-brittle cracks in 2D and 3D with enhanced strain accuracy
- Stress projection for membrane and shear locking in shell finite elements
- A new finite element formulation for computational fluid dynamics. V: Circumventing the Babuška-Brezzi condition: A stable Petrov-Galerkin formulation of the Stokes problem accommodating equal-order interpolations
- The problem of membrane locking in finite element analysis of cylindrical shells
- Mixed finite element methods - reduced and selective integration techniques: a unification of concepts
- The variational multiscale method -- a paradigm for computational mechanics
- An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids
- An efficient 3D enhanced strain element with Taylor expansion of the shape functions
- On enhanced strain methods for small and finite deformations of solids
- A comparison of three-dimensional continuum and shell elements for finite plasticity
- Improvement on the 10-node tetrahedral element for three-dimensional problems
- On hexahedral finite element HC8/27 in elasticity
- Shear and membrane locking in curved \(C^ 0\) elements
- Stabilization of incompressibility and convection through orthogonal sub-scales in finite element methods
- On numerically accurate finite element solutions in the fully plastic range
- Mixed finite elements for elasticity
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- Explicit mixed strain-displacement finite element for dynamic geometrically non-linear solid mechanics
- A robust nonlinear solid shell element based on a mixed variational formulation
- A resultant 8-node solid-shell element for geometrically nonlinear analysis
- A reduced integration solid-shell finite element based on the EAS and the ANS concept-Geometrically linear problems
- Finite elements for symmetric tensors in three dimensions
- Unified Stabilized Finite Element Formulations for the Stokes and the Darcy Problems
- A large deformation solid-shell concept based on reduced integration with hourglass stabilization
- The poor bending response of the four-node plane stress quadrilateral
- Generalization of selective integration procedures to anisotropic and nonlinear media
- Finite Elements Based Upon Mindlin Plate Theory With Particular Reference to the Four-Node Bilinear Isoparametric Element
- Numerical prediction of collapse loads using finite element methods
- Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes
- A systematic development of ‘solid-shell’ element formulations for linear and non-linear analyses employing only displacement degrees of freedom
- Three‐dimensional extension of non‐linear shell formulation based on the enhanced assumed strain concept
- THE PARTITION OF UNITY METHOD
- Analysis of 3D problems using a new enhanced strain hexahedral element
- A hybrid stress ANS solid-shell element and its generalization for smart structure modelling. Part II?smart structure modelling
- Mixed Finite Element Methods and Applications
- A class of mixed assumed strain methods and the method of incompatible modes
- Reduced integration technique in general analysis of plates and shells
- A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I-geometrically linear applications
- An accurate low order plate bending element with thickness change and enhanced strains
