3D-FEM formulations of limit analysis methods for porous pressure-sensitive materials
From MaRDI portal
Publication:2952336
DOI10.1002/nme.4527zbMath1352.74422OpenAlexW1566831357MaRDI QIDQ2952336
Djimédo Kondo, Franck Pastor, Joseph Pastor
Publication date: 30 December 2016
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1002/nme.4527
finite element methodlimit analysisconic optimizationhollow sphere modelpressure-sensitive materials
Finite element methods applied to problems in solid mechanics (74S05) Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs (65N30)
Related Items (5)
An approximate strength criterion of porous materials with a pressure sensitive and tension-compression asymmetry matrix ⋮ Fourier-based strength homogenization of porous media ⋮ Strength design of porous materials using B-Spline based level set method ⋮ A closed-form yield criterion for porous materials with Mises-Schleicher-Burzyński matrix containing cylindrical voids ⋮ Limit analysis and homogenization of porous materials with Mohr-Coulomb matrix. II: Numerical bounds and assessment of the theoretical model
Cites Work
- Assessment of hollow spheroid models for ductile failure prediction by limit analysis and conic programming
- Plastic response of porous solids with pressure-sensitive matrix
- Computational Cam clay plasticity using second-order cone programming
- Closed-form solutions for the hollow sphere model with Coulomb and Drucker-Prager materials under isotropic loadings
- Continuum modeling of a porous solid with pressure-sensitive dilatant matrix
- Mixed method and convex optimization for limit analysis of homogeneous Gurson materials: a kinematical approach
- Stress-based upper-bound method and convex optimization: case of the Gurson material
- Limit analysis and conic programming: `porous Drucker-Prager' material and Gurson's model
- Mise en œuvre numérique des méthodes de l'analyse limité pour les matériaux de von Mises et de Coulomb standards en déformation plane
- On implementing a primal-dual interior-point method for conic quadratic optimization
- A new yield function and a hydrostatic stress-controlled void nucleation model for porous solids with pressure-sensitive matrices.
- Exact solution of a plastic hollow sphere with a Mises-Schleicher matrix
- Ductile failure of cylindrically porous materials. II: Other cases of symmetry
- Hollow sphere models, conic programming and third stress invariant
- Limit analysis of continuous media with piecewise linear yield condition
- A plasticity theory for porous solids
- Finite element limit analysis using linear programming
- Limit analysis and Gurson's model
- Lectures on Modern Convex Optimization
- A new discontinuous upper bound limit analysis formulation
- Lower bound limit analysis of cohesive-frictional materials using second-order cone programming
- Yield Functions and Flow Rules for Porous Pressure-Dependent Strain-Hardening Polymeric Materials
- Limit analysis and convex programming: A decomposition approach of the kinematic mixed method
- A two-stage feasible directions algorithm for nonlinear constrained optimization
- Calculation of the critical height of a homogenized reinforced soil wall: A numerical approach
- Upper bound limit analysis using linear finite elements and non-linear programming
- Lower bound limit analysis using non-linear programming
- A general non-linear optimization algorithm for lower bound limit analysis
- Upper bound limit analysis using simplex strain elements and second-order cone programming
- Solving limit analysis problems: an interior-point method
This page was built for publication: 3D-FEM formulations of limit analysis methods for porous pressure-sensitive materials
