On the plastic flow of metals under conditions of axial symmetry
From MaRDI portal
Publication:3228193
DOI10.1098/rspa.1955.0262zbMath0067.17502OpenAlexW2102297856MaRDI QIDQ3228193
Publication date: 1955
Published in: Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1098/rspa.1955.0262
Related Items
On the unloading process for contact interaction ⋮ A novel isoparametric finite element displacement formulation for axisymmetric analysis of nearly incompressible materials ⋮ Axisymmetric plastic flow of an ideally connected medium with friction ⋮ The approximate solution of certain problems of axially-symmetric plastic flow ⋮ Geometry of principal stress trajectories for piece‐wise linear yield criteria under axial symmetry ⋮ Certain particular solutions of equations for the axisymmethical problem in the theory of ideal plasticity and generalization of Prandtl's solution of compression of plastic layer between two rough plates ⋮ Some generalized similarity solutions for plastic flow ⋮ Yielding of metal powder bonded by isolated contacts ⋮ Effect of intermediate principal stress on flat-ended punch problems ⋮ Graphical solution of axially symmetric problems of plastic flow ⋮ Kinematic limit analysis modelling by a regularization approach and finite element method ⋮ Indentation of a rigid punch on a plastically non-homogeneous material ⋮ Elastic-plastic flow through a converging conical channel ⋮ Plastic flow past a smooth cone ⋮ Principal- and slip-line methods of numerical analysis in plane and axially-symmetric deformations of rigid plastic media ⋮ A note on the deformable region in a rigid-plastic body ⋮ On the effect of friction on compression and indentation between flat dies ⋮ The plastic indentation of a semi-infinite solid by a perfectly rough circular punch ⋮ Distribution of interface stress in plane strain and axial symmetric compression ⋮ The generalized plane strain of an elastoplastic material ⋮ Assessment of the strain-rate sensitivity of metals by indentation with conical indenters ⋮ Principal line theory of axially-symmetric plastic deformation ⋮ Plastic flow of cone-shaped bodies ⋮ On the general equations of axisymmetric problems of ideal plasticity ⋮ The theory of general and ideal plastic deformations of Tresca solids ⋮ The Problem of Axially Symmetric Flow of Ideal Rigid-Plastic Huber-Mises Medium without any Specific Hypotheses
