Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies
From MaRDI portal
Publication:3300496
DOI10.1007/978-3-030-43736-7_8zbMath1454.65120OpenAlexW3040135725MaRDI QIDQ3300496
Kenji Takizawa, Yuri Bazilevs, Tayfun E. Tezduyar, Artem Korobenko
Publication date: 29 July 2020
Published in: Parallel Algorithms in Computational Science and Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/978-3-030-43736-7_8
Navier-Stokes equations (35Q30) Finite element methods applied to problems in fluid mechanics (76M10) Finite element, Rayleigh-Ritz and Galerkin methods for initial value and initial-boundary value problems involving PDEs (65M60) Parallel numerical computation (65Y05) Systems arising from the discretization of structural vibration problems (70J50)
Related Items (17)
Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework ⋮ A numerical formulation for cavitating flows around marine propellers based on variational multiscale method ⋮ Carrier-domain method for high-resolution computation of time-periodic long-wake flows ⋮ Isogeometric variational multiscale modeling of stably stratified flow over complex terrains ⋮ Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization ⋮ Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time ⋮ High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Variational multiscale method stabilization parameter calculated from the strain-rate tensor ⋮ T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation ⋮ U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization ⋮ Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine ⋮ Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method ⋮ A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion ⋮ Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks ⋮ Space-time VMS isogeometric analysis of the Taylor-Couette flow ⋮ Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Computational thermo-fluid analysis of a disk brake
- Engineering analysis and design with ALE-VMS and space-time methods
- Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
- Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
- Computational methods for parachute fluid-structure interactions
- Stabilized methods for compressible flows
- Multiscale space-time fluid-structure interaction techniques
- Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
- NURBS-based isogeometric analysis for the computation of flows about rotating components
- Isogeometric fluid-structure interaction: Theory, algorithms, and computations
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Weak imposition of Dirichlet boundary conditions in fluid mechanics
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- A new finite element formulation for computational fluid dynamics. III: The generalized streamline operator for multidimensional advective- diffusive systems
- Lagrangian-Eulerian finite element formulation for incompressible viscous flows
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- A multi-element group preconditioned GMRES algorithm for nonsymmetric systems arising in finite element analysis
- A parallel 3D computational method for fluid-structure interactions in parachute systems
- Finite element stabilization parameters computed from element matrices and vectors
- Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
- FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
- Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
- A new variational multiscale formulation for stratified incompressible turbulent flows
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
- Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
- Massively parallel finite element simulation of compressible and incompressible flows
- Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
- Multi-domain parallel computation of wake flows
- Medical-image-based aorta modeling with zero-stress-state estimation
- Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: application to a hydraulic arresting gear
- Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
- Stabilization and shock-capturing parameters in SUPG formulation of compressible flows
- Improving stability of stabilized and multiscale formulations in flow simulations at small time steps
- Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping
- Space-time computations in practical engineering applications: a summary of the 25-year history
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- FSI modeling of the Orion spacecraft drogue parachutes
- Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
- Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
- Multiscale space–time methods for thermo-fluid analysis of a ground vehicle and its tires
- ALE–VMS formulation for stratified turbulent incompressible flows with applications
- Space–time VMS method for flow computations with slip interfaces (ST-SI)
- Stabilized formulations for incompressible flows with thermal coupling
- GMRES: A Generalized Minimal Residual Algorithm for Solving Nonsymmetric Linear Systems
- Stabilized Finite Element Formulations for Incompressible Flow Computations
- Computation of moving boundaries and interfaces and stabilization parameters
- Computational Fluid–Structure Interaction
- METHODS FOR FSI MODELING OF SPACECRAFT PARACHUTE DYNAMICS AND COVER SEPARATION
- Methods for computation of flow-driven string dynamics in a pump and residence time
- Space–time Isogeometric flow analysis with built-in Reynolds-equation limit
- A stabilized ALE method for computational fluid–structure interaction analysis of passive morphing in turbomachinery
- Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
- Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
- The multi-domain method for computation of the aerodynamics of a parachute crossing the far wake of an aircraft
- Fluid-structure interactions of a parachute crossing the fair wake of an aircraft
This page was built for publication: Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies
