Space–time VMS method for flow computations with slip interfaces (ST-SI)

DOI10.1142/S0218202515400126zbMath1329.76345MaRDI QIDQ3450725

Sen Mei, Kenji Takizawa, Kenneth Montel, Hiroki Mochizuki, Hitoshi Hattori, Linqi Pan, Tayfun E. Tezduyar

Publication date: 6 November 2015

Published in: Mathematical Models and Methods in Applied Sciences (Search for Journal in Brave)

zbMATH Keywords

nonmatching meshesspace-time VMS methodslip interfacesspinning structuresvertical-axis wind turbineweakly-imposed Dirichlet conditionszero-thickness structures with porosity

Mathematics Subject Classification ID

Related Items (80)

Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations ⋮ Computational thermo-fluid analysis of a disk brake ⋮ Space–Time Flow Computation with Contact Between the Moving Solid Surfaces ⋮ Space–Time Computational FSI and Flow Analysis: 2004 and Beyond ⋮ New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods ⋮ Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC) ⋮ Computational free-surface fluid-structure interaction with application to floating offshore wind turbines ⋮ Computational analysis of wind-turbine blade rain erosion ⋮ Flow analysis of a wave-energy air turbine with the SUPG/PSPG stabilization and discontinuity-capturing directional dissipation ⋮ Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA) ⋮ Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis ⋮ Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA) ⋮ Computational analysis of flow-driven string dynamics in turbomachinery ⋮ Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines ⋮ FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow ⋮ Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods ⋮ Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method ⋮ Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling ⋮ The virtual ring shear-slip mesh update method ⋮ Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change ⋮ Anatomically realistic lumen motion representation in patient-specific space-time isogeometric flow analysis of coronary arteries with time-dependent medical-image data ⋮ Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method ⋮ The actuator line method for wind turbine modelling applied in a variational multiscale framework ⋮ Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework ⋮ A numerical formulation for cavitating flows around marine propellers based on variational multiscale method ⋮ Space-time computations in practical engineering applications: a summary of the 25-year history ⋮ Tire aerodynamics with actual tire geometry, road contact and tire deformation ⋮ Aorta zero-stress state modeling with T-spline discretization ⋮ Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity ⋮ Computational multi-phase convective conjugate heat transfer on overlapping meshes: a quasi-direct coupling approach via Schwarz alternating method ⋮ Carrier-domain method for high-resolution computation of time-periodic long-wake flows ⋮ Physics-informed machine learning for surrogate modeling of wind pressure and optimization of pressure sensor placement ⋮ The surface‐reconstruction virtual‐region mesh update method for problems with topology changes ⋮ Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization ⋮ Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time ⋮ Isogeometric large-eddy simulations of turbulent particle-laden flows ⋮ High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces ⋮ Revealing aeroelastic effects on low-rise roof structures in turbulent winds via isogeometric fluid-structure interaction ⋮ Model order reduction for deforming domain problems in a time‐continuous space‐time setting ⋮ Variational multiscale method stabilization parameter calculated from the strain-rate tensor ⋮ Flow Analysis of a Wave-Energy Air Turbine with the SUPG/PSPG Method and DCDD ⋮ SUPG/PSPG Computational Analysis of Rain Erosion in Wind-Turbine Blades ⋮ New Directions in Space–Time Computational Methods ⋮ Space-time computational flow analysis: unconventional methods and first-ever solutions ⋮ T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation ⋮ A new formulation for air-blast fluid-structure interaction using an immersed approach. I: Basic methodology and FEM-based simulations ⋮ Computational and experimental investigation of free vibration and flutter of bridge decks ⋮ Computational Cardiovascular Analysis with the Variational Multiscale Methods and Isogeometric Discretization ⋮ ALE and Space–Time Variational Multiscale Isogeometric Analysis of Wind Turbines and Turbomachinery ⋮ Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies ⋮ Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization ⋮ Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis ⋮ Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization ⋮ Using ALE-VMS to compute aerodynamic derivatives of bridge sections ⋮ The surrounding cell method based on the S-FEM for analysis of FSI problems dealing with an immersed solid ⋮ U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization ⋮ Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine ⋮ Medical-image-based aorta modeling with zero-stress-state estimation ⋮ Stability and error estimates for the successive-projection technique with B-splines in time ⋮ Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle ⋮ Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film ⋮ Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method ⋮ A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion ⋮ Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks ⋮ Space-time VMS isogeometric analysis of the Taylor-Couette flow ⋮ Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries ⋮ Computational analysis methods for complex unsteady flow problems ⋮ Methods for computation of flow-driven string dynamics in a pump and residence time ⋮ Space–time Isogeometric flow analysis with built-in Reynolds-equation limit ⋮ Immersogeometric analysis of compressible flows with application to aerodynamic simulation of rotorcraft ⋮ Modeling and simulation of bridge-section buffeting response in turbulent flow ⋮ A stabilized ALE method for computational fluid–structure interaction analysis of passive morphing in turbomachinery ⋮ Element length calculation in B-spline meshes for complex geometries ⋮ Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method ⋮ Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion ⋮ Computational analysis of particle-laden-airflow erosion and experimental verification ⋮ A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state ⋮ Variational multiscale framework for cavitating flows

Cites Work

• Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
• Computation of residence time in the simulation of pulsatile ventricular assist devices
• Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
• Hydrodynamic interaction between two red blood cells in simple shear flow: its impact on the rheology of a semi-dilute suspension
• Space-time interface-tracking with topology change (ST-TC)
• Space-time fluid mechanics computation of heart valve models
• A matrix-form GSM-CFD solver for incompressible fluids and its application to hemodynamics
• Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
• Computational methods for parachute fluid-structure interactions
• Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
• Accurate fluid-structure interaction computations using elements without mid-side nodes
• Multiscale space-time fluid-structure interaction techniques
• On the coupling between fluid flow and mesh motion in the modelling of fluid-structure interaction
• Interface projection techniques for fluid-structure interaction modeling with moving-mesh methods
• NURBS-based isogeometric analysis for the computation of flows about rotating components
• Isogeometric fluid-structure interaction: Theory, algorithms, and computations
• Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
• Weak imposition of Dirichlet boundary conditions in fluid mechanics
• Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
• Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
• A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
• A multiscale/stabilized formulation of the incompressible Navier-Stokes equations for moving boundary flows and fluid-structure interaction
• Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
• Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
• Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
• Lagrangian-Eulerian finite element formulation for incompressible viscous flows
• Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
• A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. I: The concept and the preliminary numerical tests
• A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. II: Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders
• Flow simulation and high performance computing
• Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces
• A coupled PFEM-Eulerian approach for the solution of porous FSI problems
• Parallel BDD-based monolithic approach for acoustic fluid-structure interaction
• A finite-element/boundary-element method for large-displacement fluid-structure interaction
• Fluid-structure interaction modeling of wind turbines: simulating the full machine
• Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
• Immersed smoothed finite element method for fluid-structure interaction simulation of aortic valves
• Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
• Energy approach for static and linearized dynamic studies of elastic structures containing incompressible liquids with capillarity: a theoretical formulation
• The shear-slip mesh update method
• Fluid-structure interaction simulation of pulsatile ventricular assist devices
• Space-time VMS computation of wind-turbine rotor and tower aerodynamics
• Vibration of structures containing compressible liquids with surface tension and sloshing effects. Reduced-order model
• A unified monolithic approach for multi-fluid flows and fluid-structure interaction using the particle finite element method with fixed mesh
• Interaction of complex fluids and solids: theory, algorithms and application to phase-change-driven implosion
• A plug-and-play coupling approach for parallel multi-field simulations
• Efficient numerical simulation of aeroacoustics for low Mach number flows interacting with structures
• Flow past two square cylinders with flexible splitter plates
• Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
• Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
• 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
• 3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades
• SPACE–TIME FLUID–STRUCTURE INTERACTION METHODS
• ALE-VMS AND ST-VMS METHODS FOR COMPUTER MODELING OF WIND-TURBINE ROTOR AERODYNAMICS AND FLUID–STRUCTURE INTERACTION
• Modeling of Fluid-Structure Interactions with the Space-Time Techniques
• Large eddy simulation of turbulent channel flows by the variational multiscale method
• Stabilized Finite Element Formulations for Incompressible Flow Computations
• Computation of moving boundaries and interfaces and stabilization parameters
• Computational Fluid–Structure Interaction
• CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
• STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
• A MOVING-MESH GRADIENT SMOOTHING METHOD FOR COMPRESSIBLE CFD PROBLEMS
• METHODS FOR FSI MODELING OF SPACECRAFT PARACHUTE DYNAMICS AND COVER SEPARATION
• A COMPRESSIBLE LAGRANGIAN FRAMEWORK FOR MODELING THE FLUID–STRUCTURE INTERACTION IN THE UNDERWATER IMPLOSION OF AN ALUMINUM CYLINDER
• Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
• On the Nonnormality of Subiteration for a Fluid-Structure-Interaction Problem

This page was built for publication: Space–time VMS method for flow computations with slip interfaces (ST-SI)