Boundary-integral method for drop deformation between parallel plates
From MaRDI portal
Publication:3532009
DOI10.1063/1.2715621zbMath1146.76425OpenAlexW2125359258WikidataQ105958186 ScholiaQ105958186MaRDI QIDQ3532009
P. J. A. Janssen, Patrick D. Anderson
Publication date: 3 November 2008
Published in: Physics of Fluids (Search for Journal in Brave)
Full work available at URL: https://research.tue.nl/nl/publications/36e4d334-777f-4d51-aa02-05596897a4bc
Related Items (17)
Application of local least squares finite element method (LLSFEM) in the interface capturing of two-phase flow systems ⋮ Two-phase flow simulation for distinguishing deformable particles with a LiMCA system ⋮ Mathematical modeling and numerical computation of the effective interfacial conditions for Stokes flow on an arbitrarily rough solid surface ⋮ Stochastic rotation dynamics simulations of wetting multi-phase flows ⋮ Microconfined equiviscous droplet deformation: Comparison of experimental and numerical results ⋮ An analysis of the far-field response to external forcing of a suspension in the Stokes flow in a parallel-wall channel ⋮ Isogeometric boundary integral analysis of drops and inextensible membranes in isoviscous flow ⋮ Breakup of drops in simple shear flows with high-confinement geometry ⋮ Effect of confinement on droplet deformation in shear flow ⋮ Thermotaxis of a deformable droplet in a confined Poiseuille flow ⋮ Moving least-squares aided finite element method (MLS-FEM): a powerful means to consider simultaneously velocity and pressure discontinuities of multi-phase flow fields ⋮ Axisymmetric deformation of drops through tubes with symmetric and asymmetric constrictions ⋮ Axisymmetric Stokes flow due to a point-force singularity acting between two coaxially positioned rigid no-slip disks ⋮ Accelerated boundary integral method for multiphase flow in non-periodic geometries ⋮ A boundary-integral model for drop deformation between two parallel plates with non-unit viscosity ratio drops ⋮ Low-Reynolds-number droplet motion in a square microfluidic channel ⋮ A slender-body theory for low-viscosity drops in shear flow between parallel walls
Uses Software
Cites Work
- Effect of surfactants on the deformation of drops and bubbles in Navier-Stokes flow
- Stokes flow for a stokeslet between two parallel flat plates
- PROST: a parabolic reconstruction of surface tension for the volume-of-fluid method.
- Nonsingular boundary integral method for deformable drops in viscous flows
- Motion of a particle between two parallel plane walls in low-Reynolds-number Poiseuille flow
- Efficient boundary element methods for three-dimensional exterior viscous flows
- Low reynolds number motion of a droplet between two parallel plates
- A numerical study of the deformation and burst of a viscous drop in an extensional flow
- Boundary Integral and Singularity Methods for Linearized Viscous Flow
- Numerical simulation of a concentrated emulsion in shear flow
- Collision of two deformable drops in shear flow
- Buoyancy-driven coalescence of slightly deformable drops
- Motion of an array of drops through a cylindrical tube
- Flow due to a periodic array of point forces, and the motion of small particles within a cylindrical tube of arbitrary cross section
- A numerical study of the motion of drops in Poiseuille flow. Part 1. Lateral migration of one drop
- M<scp>ICROSTRUCTURAL</scp> E<scp>VOLUTION IN</scp> P<scp>OLYMER</scp> B<scp>LENDS</scp>
- Dynamic simulation of spheroid motion between two parallel plane walls in low-Reynolds-number Poiseuille flow
- Low Reynolds number motion of a droplet in shear flow including wall effects
- A boundary-integral study of a drop squeezing through interparticle constrictions
- Wall-bounded shear flow and channel flow of suspensions of liquid drops
- Engineering Flows in Small Devices: Microfluidics Toward a Lab-on-a-Chip
- An adaptive mesh algorithm for evolving surfaces: simulations of drop breakup and coalescence
This page was built for publication: Boundary-integral method for drop deformation between parallel plates
