On contact zone models for an electrically limited permeable interface crack in a piezoelectric bimaterial
From MaRDI portal
Publication:373295
DOI10.1007/S10704-010-9465-XzbMath1273.74444OpenAlexW4253885358MaRDI QIDQ373295
Marc Kamlah, Volodymyr Govorukha
Publication date: 22 October 2013
Published in: International Journal of Fracture (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s10704-010-9465-x
contact zonepiezoelectric materialelectrically limited permeable interface crackfracture mechanical parameterspermittivity of crack medium
Related Items (2)
An electroded electrically and magnetically charged interface crack in a piezoelectric/piezomagnetic bimaterial ⋮ Influence of concentrated loading on opening of an interface crack between piezoelectric materials in a compressive field
Cites Work
- Unnamed Item
- Contact between an elastic half-plane and a partly separated stamp
- Fracture parameters of a penny-shaped crack at the interface of a piezoelectric bi-material system
- An analytical solution for a cracked piezoelectric plate according to the PKHS electric boundary condition
- Re-examination of the PKHS crack model in piezoelectric materials
- On the crack face boundary conditions in electromechanical fracture and an experimental protocol for determining energy release rates
- Combined analytical and numerical solution of 2D interface corner configurations between dissimilar piezoelectric materials
- Fracture mechanics for piezoelectric ceramics
- Permeable cracks between two dissimilar piezoelectric materials.
- Collinear permeable cracks between dissimilar piezoelectric materials
- Fracture-mechanical assessment of electrically permeable interface cracks in piezoelectric bimaterials by consideration of various contact zone models
- A set of interface cracks with contact zones in a combined tension-shear field
- Electro-mechanical yielding for a limited permeable crack in an interlayer between piezoelectric materials
- Electrostatic tractions at dielectric interfaces and their implication for crack boundary conditions
- On approach of crack tip energy release rate for a semi-permeable crack when electromechanical loads become very large
- On the influence of the electric permeability on an interface crack in a piezoelectric bimaterial compound
- Calculation of the \(J\)-integral for limited permeable cracks in piezoelectrics
- Energetically consistent boundary conditions for electromechanical fracture
- Investigation of an interface crack with a contact zone in a piezoelectric bimaterial under limited permeable electric boundary conditions
- Fracture mechanics of piezoelectric materials
- The Interface Crack
- On a plane crack in piezoelectric solids
This page was built for publication: On contact zone models for an electrically limited permeable interface crack in a piezoelectric bimaterial
