A combined surface integral and finite element solution for a three‐dimensional contact problem
From MaRDI portal
Publication:4030026
DOI10.1002/NME.1620310308zbMath0825.73794OpenAlexW2150833932MaRDI QIDQ4030026
Publication date: 1 April 1993
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1002/nme.1620310308
Contact in solid mechanics (74M15) Boundary element methods applied to problems in solid mechanics (74S15) Finite element methods applied to problems in solid mechanics (74S05) Theories of friction (tribology) (74A55)
Related Items (10)
Advanced model for the calculation of meshing forces in spur gear planetary transmissions ⋮ A nonlinear parametric model reduction method for efficient gear contact simulations ⋮ A free‐interface component mode synthesis of moving contact multibodies and its application to gear contacts ⋮ Nonlinear mesh stiffness model using slice coupling for straight bevel gear considering axial mesh force component and extended tooth contact ⋮ Geometric contact pattern estimation for gear drives ⋮ Performance assessment of solution methods for load distribution problem of gear teeth ⋮ A model order reduction method for the simulation of gear contacts based on arbitrary Lagrangian Eulerian formulation ⋮ Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration ⋮ Analysis of the plane contact with discontinuous curvature ⋮ A load distribution model for hypoid gears using ease-off topography and shell theory
This page was built for publication: A combined surface integral and finite element solution for a three‐dimensional contact problem
