A dynamic forcing method for unsteady turbulent inflow conditions
From MaRDI portal
Publication:414033
DOI10.1016/j.jcp.2011.08.012zbMath1457.76092OpenAlexW1981065587MaRDI QIDQ414033
Pierre Sagaut, Sébastien Deck, Romain Laraufie
Publication date: 8 May 2012
Published in: Journal of Computational Physics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.jcp.2011.08.012
Statistical turbulence modeling (76F55) Direct numerical and large eddy simulation of turbulence (76F65)
Related Items (9)
Wall-modelled large-eddy simulation of a hot jet-in-cross-flow with turbulent inflow generation ⋮ A rapid and low noise switch from RANS to WMLES on curvilinear grids with compressible flow solvers ⋮ A comprehensive framework for high fidelity computations of two-species compressible turbulent flows ⋮ On the Characteristic Length Scale for the Synthetic Turbulence Based on the Spalart-Allmaras Model ⋮ A consistent dual-mesh framework for hybrid LES/RANS modeling ⋮ On the generation of turbulent inflow for hybrid RANS/LES jet flow simulations ⋮ On the coupling of wall-model immersed boundary conditions and curvilinear body-fitted grids for the simulation of complex geometries ⋮ Divergence-free turbulence inflow conditions for large-eddy simulations with incompressible flow solvers ⋮ Numerical investigation of the flow dynamics past a three-element aerofoil
Uses Software
Cites Work
- Unnamed Item
- Unnamed Item
- Zonal detached eddy simulation of a spatially developing flat plate turbulent boundary layer
- Inlet conditions for large eddy simulation: a review
- A zonal RANS-LES method to determine the flow over a high-lift configuration
- A sequel to AUSM: AUSM\(^ +\)
- Numerical investigation of fully developed channel flow using shock-capturing schemes
- A new version of detached-eddy simulation, resistant to ambiguous grid densities
- A dynamic stochastic forcing method as a wall-layer model for large-eddy simulation
- An explicit filtering method for large eddy simulation of compressible flows
- A priori and a posteriori tests of inflow conditions for large-eddy simulation
- Contribution of Reynolds stress distribution to the skin friction in wall-bounded flows
- Large eddy simulation for aerodynamics: status and perspectives
- Wall-bounded turbulent flows at high Reynolds numbers: Recent advances and key issues
- Direct simulation of a turbulent boundary layer up to Rθ = 1410
- Reynolds-number scaling of the flat-plate turbulent boundary layer
- Unsteadiness of an axisymmetric separating-reattaching flow: Numerical investigation
- Generation of synthetic turbulent inflow data for large eddy simulation of spatially evolving wall-bounded flows
- On the dynamics of axisymmetric turbulent separating/reattaching flows
- Numerical simulation of the compressible mixing layer past an axisymmetric trailing edge
This page was built for publication: A dynamic forcing method for unsteady turbulent inflow conditions
