Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding

DOI10.1016/J.IJPLAS.2010.10.002zbMath1426.74270OpenAlexW1998325906MaRDI QIDQ414329

Nagaraj K. Arakere, Shawn A. English

Publication date: 11 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.10.002

zbMATH Keywords

finite element analysisductile fracturesurface cracksconstraint effectslarge-scale yielding

Mathematics Subject Classification ID

Anelastic fracture and damage (74R20) Finite element methods applied to problems in solid mechanics (74S05)

Related Items (1)

Numerical Investigations on the Effects of T-Stress in Mode I Creep Crack

Uses Software

• ABAQUS
• WARP3D

Cites Work

• Unnamed Item
• Unnamed Item
• A local viewpoint for evaluating the influence of stress triaxiality and Lode angle on ductile failure and hardening
• On the \(J_{x_1}\)-integral and the out-of-plane constraint in a 3D elastic cracked plate loaded in tension
• Analytical solutions of mixed mode plane strain crack problems in elastic perfectly plastic materials
• Determination of higher-order terms in asymptotic elastoplastic crack tip solutions
• Notes on plastic reloading zone in the asymptotic analysis of elastic- plastic crack extension
• Ductile crack growth. II: Void nucleation and geometry effects on macroscopic fracture behavior
• Effect of specimen size and crack depth on 3D crack-front constraint for SENB specimens.
• Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models.
• Computational simulation on deformation behavior of CT specimens of TRIP steel under mode I loading for evaluation of fracture toughness.
• A centrally cracked thin circular disk. I: 3D elastic-plastic finite element analysis. II: Mixed mode fatigue crack propagation.
• Fully plastic crack-tip fields for CCP and DECP specimens under tension in non-hardening materials
• A new model of metal plasticity and fracture with pressure and Lode dependence
• Plane strain deformation near a crack tip in a power-law hardening material
• Singular behaviour at the end of a tensile crack in a hardening material
• A multiscale model for the ductile fracture of crystalline materials

This page was built for publication: Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding