Cyclic multiaxial and shear finite deformation responses of OFHC Cu. II: An extension to the KHL model and simulations

DOI10.1016/J.IJPLAS.2009.10.008zbMath1426.74075OpenAlexW1963797643MaRDI QIDQ422617

Mohammad Abdel-Karim, Akhtar S. Khan

Publication date: 18 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2009.10.008

zbMATH Keywords

kinematic hardeningratchettingKHL modelmodeling of cyclic viscoplasticityOFHC copper

Mathematics Subject Classification ID

Large-strain, rate-dependent theories of plasticity (74C20)

Related Items (2)

Meso-mechanical constitutive model for ratchetting of particle-reinforced metal matrix composites ⋮ Constitutive modeling of cyclic deformation of metals under strain controlled axial extension and cyclic torsion

Cites Work

• Unnamed Item
• Unnamed Item
• On the calibration of the chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction
• Constitutive equations for cyclic plasticity and cyclic viscoplasticity
• Benchmark experiments and characteristic cyclic plasticity deformation
• A review of some plasticity and viscoplasticity constitutive theories
• Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure
• Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models
• Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model
• Modified kinematic hardening rules for simulations of ratchetting
• Kinematic hardening rules with critical state of dynamic recovery. I: Formulation and basic features for ratchetting behavior. II: Applications to experiments of ratchetting behavior
• Ratcheting of cyclically hardening and softening materials. I: Uniaxial behavior. II: Multiaxial behavior
• Kinematic hardening model suitable for ratchetting with steady-state
• Ratchetting under tension-torsion loadings: Experiments and modelling
• A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting
• Behaviors of three BCC metal over a wide range of strain rates and temperatures: Experiments and modeling
• Cyclic multiaxial and shear finite deformation response of OFHC. I: Experimental results

This page was built for publication: Cyclic multiaxial and shear finite deformation responses of OFHC Cu. II: An extension to the KHL model and simulations