A novel approach for anisotropic hardening modeling. II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material
From MaRDI portal
Publication:422645
DOI10.1016/j.ijplas.2010.01.001zbMath1426.74061OpenAlexW1986695068WikidataQ57972688 ScholiaQ57972688MaRDI QIDQ422645
G. Rousselier, Jeong Whan Yoon, Frédéric Barlat
Publication date: 18 May 2012
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.01.001
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Anisotropy in solid mechanics (74E10) Crystalline structure (74E15) Finite element methods applied to problems in solid mechanics (74S05)
Related Items
Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations ⋮ Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity ⋮ On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow
Cites Work
- Unnamed Item
- Unnamed Item
- Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. II: A very high work hardening aluminum alloy (annealed 1100 Al)
- Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. III: Yield surface in tension-tension stress space (Al 6061-T 6511 and annealed 1100 Al)
- Deformation texture prediction: from the Taylor model to the advanced LAMEL model
- A practical two-surface plasticity model and its application to spring-back prediction
- A simplified ``polycrystalline model for viscoplastic and damage finite element analyses
- Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification
- Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations
- A crystal plasticity model for strain-path changes in metals
- A review of some plasticity and viscoplasticity constitutive theories
- A micromechanical approach to inelastic behaviour of metals
- Using texture components in crystal plasticity finite element simulations.
- Ratchetting under tension-torsion loadings: Experiments and modelling
- Earing predictions based on asymmetric nonquadratic yield function
- Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. I: Theory and formulation
- Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. II: Characterization of material properties
- On pre-straining and the evolution of material anisotropy in sheet metals
- Finite element modeling of plastic anisotropy induced by texture and strain-path change.
- Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample.
- Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear
- Plane stress yield function for aluminum alloy sheets. I: Theory.
- A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming.
- Anisotropic hardening and non-associated flow in proportional loading of sheet metals
- On the modeling of hardening in metals during non-proportional loading
- Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets
- Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function
- Polycrystal modelling of IF-Ti steel under complex loading path
- A phenomonological plasticity model with non-normality effects representing observations in crystal plasticity.
- Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure.
