Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method
From MaRDI portal
Publication:422667
DOI10.1016/j.ijplas.2009.05.005zbMath1426.74101OpenAlexW2040408990MaRDI QIDQ422667
Anand Krishna Kanjarla, Laurent Delannay, Paul van Houtte
Publication date: 18 May 2012
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2009.05.005
Crystalline structure (74E15) Finite element methods applied to problems in solid mechanics (74S05) Micromechanics of solids (74M25) Plastic materials, materials of stress-rate and internal-variable type (74C99)
Related Items (8)
Interpolation-free discrete modeling with gradient matrix: case study of edge dislocation in linearly elastic crystal ⋮ Model for partitioning slip patterns at triple junctions of grains ⋮ A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model ⋮ A `stack' model of rate-independent polycrystals ⋮ On the uniqueness of a rate-independent plasticity model for single crystals ⋮ Incorporation of twinning into a crystal plasticity finite element model: evolution of lattice strains and texture in Zircaloy-2 ⋮ Grain boundary stresses in elastic materials ⋮ A single grain boundary parameter to characterize normal stress fluctuations in materials with elastic cubic grains
Cites Work
- Deformation texture prediction: from the Taylor model to the advanced LAMEL model
- An effective computational algorithm for rate-independent crystal plasticity based on a single crystal yield surface with an application to tube hydroforming
- On the elastic--viscoplastic behavior of nanocrystalline materials
- 3D simulations of microstructure and comparison with experimental microstructure coming from O.I.M analysis
- Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal
- A hierarchical model for rate-dependent polycrystals
- X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary
- Nanocrystalline grain boundaries that slip and separate: A gradient theory that accounts for grain-boundary stress and conditions at a triple-junction
- Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction.
- Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries
- Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation.
- Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression
- Measurement of deformation fields in polycrystalline OFHC copper.
- Investigating the limits of polycrystal plasticity modeling
- A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking
- The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals
- Multiscale modelling of the plastic anisotropy and deformation texture of polycrystalline materials
- Three-dimensional local stress analysis on grain boundaries in polycrystalline material
- A secant-viscosity composite model for the strain-rate sensitivity of nanocrystalline materials
- Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons
- Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials
- A multiscale approach for modeling scale-dependent yield stress in polycrystalline metals
- New Perspectives in Plasticity Theory: Dislocation Nucleation, Waves, and Partial Continuity of Plastic Strain Rate
- Intergranular and intragranular behavior of polycrystalline aggregates. I: F. E. model
- Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations
This page was built for publication: Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method
