Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. III: Yield surface in tension-tension stress space (Al 6061-T 6511 and annealed 1100 Al)

DOI10.1016/J.IJPLAS.2009.07.007zbMath1427.74003OpenAlexW2036630471MaRDI QIDQ422677

Akhtar S. Khan, Thomas B. Stoughton, Amit Prakash Pandey

Publication date: 18 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2009.07.007

zbMATH Keywords

elastic modulihydroformingcross-effectkinematic and isotropic hardeningsubsequent yield surface

Mathematics Subject Classification ID

Experimental work for problems pertaining to mechanics of deformable solids (74-05) Large-strain, rate-independent theories of plasticity (including nonlinear plasticity) (74C15)

Related Items (8)

Interpolation-based anisotropic yield and hardening models ⋮ A thermodynamic consistent damage and healing model for self healing materials ⋮ Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures ⋮ Evolution of yield surface in the 2D and 3D stress spaces ⋮ A novel approach for anisotropic hardening modeling. II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material ⋮ Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. II: A very high work hardening aluminum alloy (annealed 1100 Al) ⋮ An elasto-plastic damage constitutive theory and its prediction of evolution of subsequent yield surfaces and elastic constants ⋮ Effect of elastic modulus variation during plastic deformation on uniaxial and multiaxial ratchetting simulations

Cites Work

• Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. II: A very high work hardening aluminum alloy (annealed 1100 Al)
• Constitutive modelling of orthotropic plasticity in sheet metals
• Path-dependence of the forming limit stresses in a sheet metal
• Inflation and burst of aluminum tubes. II: An advanced yield function including deformation-induced anisotropy
• Plastic instability in dual-pressure tube-hydroforming process
• A general anisotropic yield criterion using bounds and a transformation weighting tensor
• Effect of yield surface evolution on bending induced cross sectional deformation of thin-walled sections.
• A yield function for anisotropic materials application to aluminum alloys.
• Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure
• A general forming limit criterion for sheet metal forming
• Inflation and burst of anisotropic aluminum tubes for hydroforming applications
• A theory of the yielding and plastic flow of anisotropic metals
• On forming limit stress diagram analysis

This page was built for publication: Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. III: Yield surface in tension-tension stress space (Al 6061-T 6511 and annealed 1100 Al)