A new analytical theory for earing generated from anisotropic plasticity
From MaRDI portal
Publication:422695
DOI10.1016/j.ijplas.2011.01.002zbMath1426.74074OpenAlexW2064987364WikidataQ57972647 ScholiaQ57972647MaRDI QIDQ422695
Jeong Whan Yoon, Frédéric Barlat, Robert E. Dick
Publication date: 18 May 2012
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2011.01.002
Anisotropy in solid mechanics (74E10) Experimental work for problems pertaining to mechanics of deformable solids (74-05) Large-strain, rate-independent theories of plasticity (including nonlinear plasticity) (74C15)
Related Items (4)
Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations ⋮ Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity ⋮ A convex fourth order yield function for orthotropic metal plasticity ⋮ Accuracy assessment of analytical earing models
Cites Work
- A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming
- Anisotropic response of high-purity \(\alpha \)-titanium: experimental characterization and constitutive modeling
- Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals
- Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations
- A crystal plasticity model for strain-path changes in metals
- A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metals
- Inflation and burst of aluminum tubes. II: An advanced yield function including deformation-induced anisotropy
- A review of some plasticity and viscoplasticity constitutive theories
- An elasto-plastic constitutive model with plastic strain rate potentials for anisotropic cubic metals
- Elastic-viscoplastic anisotropic modeling of textured metals and validation using the Taylor cylinder impact test
- Parameter identification of advanced plastic strain-rate potentials and impact on plastic anisotropy prediction
- The Facet method: A hierarchical multilevel modelling scheme for anisotropic convex plastic potentials
- Plane stress yield function for aluminum alloy sheets. II: FE formulation and its implementation.
- Earing predictions based on asymmetric nonquadratic yield function
- Linear transformation-based anisotropic yield functions.
- On pre-straining and the evolution of material anisotropy in sheet metals
- Plane stress yield function for aluminum alloy sheets. I: Theory.
- Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system
- Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential
- Anisotropic hardening and non-associated flow in proportional loading of sheet metals
- A finite element formulation based on non-associated plasticity for sheet metal forming
- Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals
- Orthotropic yield criterion for hexagonal closed packed metals
- Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function
- Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate
- On linear transformations of stress tensors for the description of plastic anisotropy
- A theory of the yielding and plastic flow of anisotropic metals
- A phenomonological plasticity model with non-normality effects representing observations in crystal plasticity.
This page was built for publication: A new analytical theory for earing generated from anisotropic plasticity
