Plastic deformation modes in perforated sheets and their relation to yield and limit surfaces

DOI10.1016/j.ijplas.2010.10.004zbMath1426.74090OpenAlexW2014327220MaRDI QIDQ422752

Marek-Jerzy Pindera, Hamed Khatam

Publication date: 18 May 2012

Published in: International Journal of Plasticity (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.10.004

zbMATH Keywords

homogenizationmicromechanicsperforated metalsyield and limit surfaces

Mathematics Subject Classification ID

Micromechanics of solids (74M25) Plastic materials, materials of stress-rate and internal-variable type (74C99) Homogenization in equilibrium problems of solid mechanics (74Q05)

Cites Work

• Unnamed Item
• Unnamed Item
• Plasticity-triggered architectural effects in periodic multilayers with wavy microstructures
• Localization of elastic deformation in strongly anisotropic, porous, linear materials with periodic microstructures: exact solutions and dilute expansions
• Infinite-contrast periodic composites with strongly nonlinear behavior: effective-medium theory versus full-field simulations
• Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids
• Parametric finite-volume micromechanics of periodic materials with elastoplastic phases
• Homogenization-based continuum plasticity-damage model for ductile failure of materials containing heterogeneities
• Finite-volume direct averaging micromechanics of heterogeneous materials with elastic-plastic phases
• Lattice path combinatorics and linear probing
• Nonuniform transformation field analysis
• Damage and size effect during superplastic deformation.
• Stochastic calibration of local constitutive models through measurements at the macroscale in heterogeneous media
• A theoretical approach of strain localization within thin planar bands in porous ductile materials
• Computational analysis of nonlinear composite structures using the nonuniform transformation field analysis
• Elastic properties of reinforced solids: Some theoretical principles
• STABILITY BY HOMOGENIZATION OF THERMOVISCOPLASTIC PROBLEMS
• Two stable-by-homogenization models in simple shearing of rate-dependent non-homogeneous materials
• Transformation field analysis of inelastic composite materials
• An assessment of the Gurson yield criterion by a computational multi‐scale approach

This page was built for publication: Plastic deformation modes in perforated sheets and their relation to yield and limit surfaces