Wedge indentation into elastic-plastic single crystals. I: Asymptotic fields for nearly-flat wedge
From MaRDI portal
Publication:422764
DOI10.1016/j.ijplas.2010.10.007zbMath1426.74239OpenAlexW1982601978MaRDI QIDQ422764
Publication date: 18 May 2012
Published in: International Journal of Plasticity (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.ijplas.2010.10.007
Small-strain, rate-dependent theories of plasticity (including theories of viscoplasticity) (74C10) Contact in solid mechanics (74M15) Analytic approximation of solutions (perturbation methods, asymptotic methods, series, etc.) of equilibrium problems in solid mechanics (74G10) Crystalline structure (74E15)
Related Items (3)
Dislocation structure during microindentation ⋮ Modeling and inverse identification method for the characterization of elastic-plastic contact behavior during flat punch indentation ⋮ Grain size dependence of polycrystalline plasticity modeling in cylindrical indentation
Cites Work
- Unnamed Item
- Unnamed Item
- Experimental lower bounds on geometrically necessary dislocation density
- Orientation dependence of the plastic slip near notches in ductile FCC single crystals
- Crack tip singular fields in ductile crystals with Taylor power-law hardening. II: Plane strain
- Cylindrical void in a rigid-ideally plastic single crystal. III: Hexagonal close-packed crystal
- X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary
- Asymptotic analysis of growing plane strain tensile cracks in elastic- ideally plastic solids
- A general treatment of plastic anisotropy under conditions of plane strain
- Cylindrical void in a rigid-ideally plastic single crystal. I: Anisotropic slip line theory solution for face-centered cubic crystals
- Strain gradient crystal plasticity analysis of a single crystal containing a cylindrical void
- Plane strain deformation near a crack tip in a power-law hardening material
- Singular behaviour at the end of a tensile crack in a hardening material
- Plane strain slip line theory for anisotropic rigid-plastic materials
- Cylindrical void in a rigid-ideally plastic single crystal. II: Experiments and simulations
- Characterization of Plastic Deformation Induced by Microscale Laser Shock Peening
- Contact Mechanics
- A theory of the yielding and plastic flow of anisotropic metals
- Continuum simulations of directional dependence of crack growth along a copper/sapphire bicrystal interface. I: Experiments and crystal plasticity background. II: Crack tip stress/deformation analysis
- Asymptotic solutions for tensile crack tip fields without kink-type shear bands in elastic-ideally plastic single crystals
This page was built for publication: Wedge indentation into elastic-plastic single crystals. I: Asymptotic fields for nearly-flat wedge
