Modelling the pressure die casting process using a hybrid Finite-Boundary Element model

DOI<1165::AID-NME624>3.0.CO;2-9 10.1002/(SICI)1097-0207(19990730)45:9<1165::AID-NME624>3.0.CO;2-9zbMath0963.76552OpenAlexW1972147607MaRDI QIDQ4267044

No author found.

Publication date: 24 June 2001

Full work available at URL: https://doi.org/10.1002/(sici)1097-0207(19990730)45:9<1165::aid-nme624>3.0.co;2-9

zbMATH Keywords

finite element methodboundary element methodsolidificationboilingmultiplicative Schwarz methodlinear heat conductionpressure die castingcapacitance methodthree-dimensional hybrid thermal model

Mathematics Subject Classification ID

Stefan problems, phase changes, etc. (80A22) Multiphase and multicomponent flows (76T99) Boundary element methods applied to problems in fluid mechanics (76M15) Finite element methods applied to problems in fluid mechanics (76M10)

Cites Work

• Unnamed Item
• Unnamed Item
• A new method for coupling of boundary element method and finite element method
• A preconditioning strategy for the solution of linear boundary element systems using the GMRES method
• Modelling the transient thermal behavior of the pressure die-casting process with the BEM
• Boundary integral equation solution of moving boundary phase change problems
• Modelling the pressure die casting process with the boundary element method: Steady state approximation
• An analysis of solidification problems by the boundary element method
• The coupling of the finite element method and boundary solution procedures
• SOURCE-WEIGHTED DOMAIN INTEGRAL APPROXIMATION FOR LINEAR TRANSIENT HEAT CONDUCTION
• AN ITERATIVE SOLUTION SCHEME FOR SYSTEMS OF WEAKLY CONNECTED BOUNDARY ELEMENT EQUATIONS

This page was built for publication: Modelling the pressure die casting process using a hybrid Finite-Boundary Element model