BEM formulation for reinforced plates
From MaRDI portal
Publication:443524
DOI10.1016/j.enganabound.2008.11.005zbMath1244.74195OpenAlexW1970616360MaRDI QIDQ443524
Leandro Waidemam, Wilson Sergio Venturini
Publication date: 7 August 2012
Published in: Engineering Analysis with Boundary Elements (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1016/j.enganabound.2008.11.005
Plates (74K20) Boundary element methods applied to problems in solid mechanics (74S15) Composite and mixture properties (74E30)
Related Items (5)
A practical boundary element analysis of slab-beam floor type ⋮ A boundary element formulation to perform elastic analysis of heterogeneous microstructures ⋮ A 2D RVE formulation by the boundary element method considering phase debonding ⋮ A 2D boundary element formulation to model the constitutive behavior of heterogeneous microstructures considering dissipative phenomena ⋮ A BEM formulation based on Reissner's hypothesis for analysing the coupled stretching-bending problem of building floor structures
Cites Work
- Stiffened plate bending analysis by the boundary element method
- A mixed boundary integral - finite element approach to plate vibration problems
- An approximate finite deflection analysis of a heated elastic plate by the boundary element method
- Boundary integral formulation for plate flexure with arbitrary boundary conditions
- A general boundary integral formulation for the numerical solution of plate bending problems
- Analysis of plates reinforced with beams.
- Dynamic analysis of elastic plates reinforced with beams of doubly-symmetrical cross section
- Boundary element analysis of shear deformable stiffened plates
- Nonlinear boundary element analysis of floor slabs reinforced with rectangular beams
- Static bending analysis of stiffened plates using the boundary element method
- Building floor analysis by the boundary element method
- Analysis of Clamped Plates on Elastic Foundation by the Boundary Integral Equation Method
- Analysis of plates stiffened by parallel beams
- The direct boundary element method in plate bending
- Finite elements with boundary interpolation
- Unnamed Item
- Unnamed Item
This page was built for publication: BEM formulation for reinforced plates
