Local and global smoothing of discontinuous finite element functions using a least squares method

DOI10.1002/nme.1620080303zbMath0286.73066OpenAlexW2100199575MaRDI QIDQ4773397

Publication date: 1974

Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1002/nme.1620080303

Mathematics Subject Classification ID

Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Plates (74K20) Finite element methods applied to problems in solid mechanics (74S05)

Related Items

Enhanced derivative recovery through least square residual penalty, Higher-order gradient post-processings for second-order elliptic problems, Remeshing for metal forming simulations?Part I: Two-dimensional quadrilateral remeshing, A non-invasive heuristic approach to shape optimization in forming, CRITERIA TO ACHIEVE NEARLY OPTIMAL MESHES IN THEh-ADAPTIVE FINITE ELEMENT METHOD, Validation of recipes for the recovery of stresses and derivatives by a computer-based approach, Advection approaches for single- and multi-material arbitrary Lagrangian-Eulerian finite element procedures, Unnamed Item, Multiscale methods for composites: A review, Recovery of consistent stresses for compatible finite elements, Shape optimization of peristaltic pumping, Patch-averaged assumed strain finite elements for stress analysis, A novel numerical manifold method with derivative degrees of freedom and without linear dependence, A variational method for finite element stress recovery and error estimation, Finite element derivative recovery by moving least square interpolants, \(\eta\%\)-Superconvergence of finite element approximations in the interior of general meshes of triangles, \(C^1\)-continuous stress recovery in finite element analysis, A mixed finite element model for plane strain elastic-plastic analysis. I. Formulation and assessment of the overall behaviour. II: Application to the 4-node bilinear element, An \(h\)-adaptive SUPG-FEM solution of the pure advection equation, Topological sensitivity analysis in large deformation problems, Hybrid finite elements for the computation of sandwich plates, A TWO‐DIMENSIONAL ZHU—ZIENKIEWICZ METHOD FOR GRADIENT RECOVERY FROM FINITE‐ELEMENT SOLUTIONS, The superconvergent cluster recovery method, Reduction in mesh bias for dynamic fracture using adaptive splitting of polygonal finite elements, An updated Lagrangian method with error estimation and adaptive remeshing for very large deformation elasticity problems, Efficient 3D data transfer operators based on numerical integration, Seamless-domain method: a meshfree multiscale numerical analysis, Topological sensitivity analysis, Second-order pyramid element formulations suitable for lumped-mass explicit methods in nonlinear solid mechanics, An a posteriori error indicator for Coulomb's frictional contact, A spatially adaptive grid refinement scheme for the finite element solution of a second order obstacle problem, Lie-group interpolation and variational recovery for internal variables, A combined mesh and model adaptive strategy for the scaling issues in the numerical modelling of the ductile damage in thin panels., A self-adaptive h-refinement technique for the boundary element method, A quadrilateral mesh generator for adaptive procedures in bulk forming processes, An improved variational method for finite element stress recovery and a posteriori error estimation, Error estimation for natural frequency analysis using plate elements, An adaptive meshing automatic scheme based on the strain energy density function, Analysis of the superconvergent patch recovery technique and a posteriori error estimator in the finite element method. II, Finite element derivative interpolation recovery technique and superconvergence., h‐adaptive finite element solution of unsteady thermally driven cavity problem, A continuum and computational framework for viscoelastodynamics. I: Finite deformation linear models, Enhancing structural topology optimization, Stress recovery procedure for discontinuous deformation analysis, A boundary element alternating method for two-dimensional mixed-mode fracture problems, On configurational forces for gradient-enhanced inelasticity, Improvements on a non-invasive, parameter-free approach to inverse form finding, The superconvergent patch recovery (SPR) and adaptive finite element refinement, An adaptive mesh refinement technique for two-dimensional shear band problems, On mixed finite element formulations and stress recovery techniques, Unnamed Item, An adaptive mesh refinement technique for the analysis of shear bands in plane strain compression of a thermoviscoplastic solid, Recent experiences with error estimation and adaptivity. II: Error estimation for \(h\)-adaptive approximations on grids of triangles and quadrilaterals, Unnamed Item, Automatic approach for lung segmentation with juxta-pleural nodules from thoracic CT based on contour tracing and correction, A two-dimensional finite element method for simulating the constitutive response and microstructure of polycrystals during high temperature plastic deformation, A posteriorierror estimation for extended finite elements by an extended global recovery, Equivalence between mixed models and displacement models sing reduced integration, On superconvergence techniques, Reduced integration, function smoothing and non-conformity in finite element analysis (with special reference to thick plates), A stabilised nodal spectral element method for fully nonlinear water waves, The derivative patch interpolation recovery technique and superconvergence for the discontinuous Galerkin method, Superconvergence analysis for the explicit polynomial recovery method, An improvement in the modeling of the second derivative of displacement field in structural analysis, An improved finite element formulation derived from the method of weighted residuals, Reduced integration for improved accuracy of finite element approximations, A Galerkin projection technique for the evaluation of potential derivatives on a smooth boundary in 2D BEM, Superconvergent Patch Recovery for plate problems using statically admissible stress resultant fields, A superconvergent stress recovery technique for accurate boundary stress extraction, A novel primal-mixed finite element approach for heat transfer in solids, A comparison of mapping algorithms for hierarchical adaptive FEM in finite elasto-plasticity, A posteriori estimation of the error in the recovered derivatives of the finite element solution, A combined \(r-h\) adaptive strategy based on material forces and error assessment for plane problems and bimaterial interfaces, An updated Lagrangian method with error estimation and adaptive remeshing for very large deformation elasticity problems: the three-dimensional case, Superconvergent patch recovery and a posteriori error estimation technique in adaptive isogeometric analysis, A multi-field finite element approach for the modelling of fibre-reinforced composites with fibre-bending stiffness, Recovery procedures in error estimation and adaptivity. II: Adaptivity in nonlinear problems of elasto-plasticity behaviour, Free vibration analysis of composite and sandwich plates using an improved discrete Kirchhoff quadrilateral element based on third-order zigzag theory, Traction BIE solutions for flat cracks, A simple history-dependent remeshing technique to increase finite element model stability in elastic surface deformations, Topological sensitivity analysis for three-dimensional linear elasticity problem, Adaptive FEM analysis of selected elastic-visco-plastic problems, MLS (moving least square)-based finite elements for three-dimensional nonmatching meshes and adaptive mesh refinement, Analysis of the superconvergent patch recovery technique and a posteriori error estimator in the finite element method. I., A family of quadrilateral hybrid-Trefftz \(p\)-elements for thick plate analysis, Three-dimensional welding analysis using an adaptive mesh scheme, Unnamed Item, A displacement formulation for the finite element elastic-plastic problem, A finite element analysis of the motion and evolution of voids due to strain and electromigration induced surface diffusion, Iterative method for constrained and mixed approximation. An inexpensive improvement of F.E.M. performance, Unnamed Item, Locking, spurious mechanisms, and pressure divergence in penalty finite element methods for Stokes flow problems, On stress computation in displacement finite element models, Application of stress smoothing methods to a finite element pile driving analysis, Adaptive grid optimization for structural analysis -- Geometry-based approach, Delamination in GLARE laminates subjected to oblique low velocity impact considering friction, An element error indicator and a related stress-improvement procedure, h‐adaptive finite element solution of high Rayleigh number thermally driven cavity problem, The three R's of engineering analysis and error estimation and adaptivity, On adaptive remeshing techniques for crack simulation problems, A practical error estimator in elastoplastic problems with large strains. Part I: theoretical development, Unnamed Item, THREE‐DIMENSIONAL GRADIENT RECOVERY BY LOCAL SMOOTHING OF FINITE‐ELEMENT SOLUTIONS, Discrete data-adaptive approximation of hyperelastic energy functions, On gradient‐based optimization strategies for inverse problems in metal forming, Theoretical formulations for adaptive finite element computations, An improved stress recovery technique for the unfitted finite element analysis of discontinuous gradient fields, Virtual displacement based discontinuity layout optimization, On aerodynamic force computation in fluid-structure interaction problems -- comparison of different approaches, Superconvergent patch recovery technique for the finite element method in acoustics, Error Estimation and Stress Recovery by Patch Equilibrium in the Isogeometric Analysis Method, Model adaptivity for finite element analysis of thin or thick plates based on equilibrated boundary stress resultants, An adaptive procedure for the finite element computation of non‐linear structural problems, Fixed grid finite elements in elasticity problems, Development of a grid‐based mesh generation technique and its application to remeshing during the finite element simulation of a metal forming process, Unnamed Item