Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum
From MaRDI portal
Publication:4797023
DOI10.1108/02644400210435843zbMath1021.74001OpenAlexW1568245797MaRDI QIDQ4797023
Publication date: 18 June 2003
Published in: Engineering Computations (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1108/02644400210435843
bibliographycablesshellsfinite element methodsrodsbeamsmembranesplatesbarscolumnsdiscsbladesstructural elements
Rods (beams, columns, shafts, arches, rings, etc.) (74K10) Plates (74K20) Finite element methods applied to problems in solid mechanics (74S05) Shells (74K25) General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to mechanics of deformable solids (74-00)
Related Items
A reconstructed edge-based smoothed DSG element based on global coordinates for analysis of Reissner-Mindlin plates ⋮ A cell-based smoothed three-node Mindlin plate element (CS-MIN3) for static and free vibration analyses of plates ⋮ A node-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner-Mindlin plates ⋮ An edge-based smoothed finite element method (ES-FEM) with stabilized discrete shear gap technique for analysis of Reissner-Mindlin plates ⋮ A new hybrid smoothed FEM for static and free vibration analyses of Reissner-Mindlin plates ⋮ A cell‐based smoothed discrete shear gap method using triangular elements for static and free vibration analyses of Reissner–Mindlin plates
Cites Work
- Adaptive FE-analysis of column supported Reissner–Mindlin plates
- Error estimation and adaptivity in explicit nonlinear finite element simulation of quasi-static problems
- A high precision coupled bending–extension triangular finite element for laminated plates
- Remarks on partial selective reduced integration method for Reissner–Mindlin plate problem
- Buckling and dynamic behaviour of laminated composite structures using a discrete higher-order displacement model
- Dynamic behaviours of cables in parametrically unstable zones
- Error estimation through the constitutive relation for Reissner–Mindlin plate bending finite elements
- A highly efficient enhanced assumed strain physically stabilized hexahedral element
- A four-node, shear-deformable shell element developed via explicit Kirchhoff constraints
- A posteriori error estimation in non-linear FE analyses of shell structures
- A 3D brick element based on Hu-Washizu variational principle for mesh distortion
- Hierarchical model adaptivity in finite element analysis for non-linear plate problems
- A new class ofCn interpolations and its application to the finite element method
- A new 3-node triangular flat shell element
- Domain Decomposition Methods for Mortar Finite Element Discretizations of Plate Problems
- Residual-Based A Posteriori Error Estimate for a Nonconforming Reissner--Mindlin Plate Finite Element
- PARTIAL SELECTIVE REDUCED INTEGRATION SCHEMES AND KINEMATICALLY LINKED INTERPOLATIONS FOR PLATE BENDING PROBLEMS
- A 12‐node hybrid stress brick element for beam/column analysis
- Hybrid-stress solid elements for shell structures based upon a modified variational functional
- A POSTERIORI ERROR ESTIMATES FOR THE FOKKER–PLANCK AND FERMI PENCIL BEAM EQUATIONS
- Anisotropic finite element estimates and local locking for shells: parabolic case
- Transformation of dynamic loads into equivalent static loads based on modal analysis
- Nonlinear dynamics of flexible beams in planar motion: formulation and time-stepping scheme for stiff problems
- A simplified analysis of elastic plates with edge beams
- Adaptive analysis of yield line patterns in plates with the arbitrary Lagrangian–Eulerian method
- Free vibration of skew laminates
- Generation of exact stiffness matrix for a conical shell element
- Numerical analysis of moving orthotropic thin plates
- A layer-wise triangle for analysis of laminated composite plates and shells
- A discrete layer beam finite element for the dynamic analysis of composite sandwich beams with integral damping layers
- On immunizing five-beta hybrid-stress element models from ?trapezoidal locking? in practical analyses
- Optimal error estimates for FEM approximations of dynamic nonlinear shallow shells
- Shear flexible field-consistent curved spline beam element for vibration analysis
- Comparative accuracy of DQ and HDQ methods for three-dimensional vibration analysis of rectangular plates
- Error estimation for plate structures
- Locking-free finite elements for the Reissner-Mindlin plate
- A variationally consistent generalized variable formulation for enhanced strain finite elements
- MODELLING THE VIBRATION BEHAVIOUR OF INFINITE STRUCTURES BY FEM
- A LOCK-FREE MATERIAL FINITE ELEMENT FOR NON-LINEAR OSCILLATIONS OF LAMINATED PLATES
- Rigid square inclusion embedded within an epoxy disk: Asymptotic stress analysis.
- Spectral element-based prediction of active power flow in Timoshenko beams
- On the modeling of integrally actuated helicopter blades.
- Numerical methods for analysis of plates on tensionless elastic foundations.
- The equivalent parallelogram and parallelepiped, and their application to stabilized finite elements in two and three dimensions.
- Efficient extreme value prediction for nonlinear beam vibrations using measured random response histories
- Geometrically exact sandwich shells: The dynamic case.
- Hierarchical finite element bases for triangular and tetrahedral elements
- Fourier mode analysis of layers in shallow shell deformations
- A general beam finite element with deformable cross-section.
- Analysis of kinematic linked interpolation methods for Reissner-Mindlin plate problems
- Finite element Galerkin solutions for the nonplanar oscillatory beam equations.
- Least-squares finite element approximations to the Timoshenko beam problem.
- Dynamic study of a wind turbine blade with horizontal axis
- A new twelve DOF quadrilateral element for analysis of thick and thin plates.
- One-dimensional dynamics of zonal jets on rapidly rotating spherical shells.
- Three-dimensional finite element analysis of saddle supported pressure vessels.
- Numerical models for nonlinear analysis of elastic shells with eigenmode-affine imperfections
- Stabilized finite element approximations for the Reissner-Mindlin plate
- Apparently first closed-form solution for vibrating inhomogeneous beams
- General complete Lagrange interpolations with applications to three-dimensional finite element analysis
- Mixed formulation in Koiter analysis of thin-walled beams
- Convergence properties and derivative extraction of the superconvergent Timoshenko beam finite element
- Wavelets in hybrid-mixed stress elements
- Finite differences/elements in classical beam problems: Derivation of feasibility conditions under parametric inequality constraints with the help of Reduce and REDLOG
- Finite element analysis of Saint-Venant torsion problem with exact integration of the elastic-plastic constitutive equations
- Stochastic second-order perturbation approach to the stress-based finite element method
- Form finding of membrane structures by the updated reference method with minimum mesh distortion
- On nonisothermal elastoplastic analysis of shell components employing realistic hardening responses
- Dynamic analysis of 3D beams with joints in the presence of large rotations
- A higher-order sandwich plate theory accounting for 3-D stresses
- The quintic finite element and finite strip with generalized degrees of freedom in structural analysis
- Finite element formulation for cylindrical bending of a transversely compressible sandwich plate, based on assumed transverse strains
- On mortar-type Morley element method for plate bending problem
- A superconvergent method for approximating the bending moment of elastic beams with hysteresis damping
- Dynamic response of spinning tapered Timoshenko beams using modal reduction
- A six-node pentagonal assumed natural strain solid-shell element
- Torsion-extension coupling in initially twisted beams by finite elements
- Locking-free degenerated isoparametric shell element.
- Analysis of mixed finite elements for laminated composite plates
- A nonlinear finite element formulation for shells of arbitrary geometry
- An adaptive finite element approach for a mixed Reissner-Mindlin plate formulation
- Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells.
- Evaluation of modal stress resultants in freely vibrating plates
- Analysis of thick sandwich construction by a \(\{3,2\}\)-order theory.
- Warping and in-plane twist parameters in kinematics of finite rotation shells
- A local point interpolation method for static and dynamic analysis of thin beams
- An accurate low order plate bending element with thickness change and enhanced strains
- An effective finite rotation formulation for geometrical nonlinear shell structures
- Influence of roughness on characteristics of tight interference fit of a shaft and a hub
- An averaged nodal deformation gradient linear tetrahedral element for large strain explicit dynamic applications
- A new triangular element for the analysis of thick and thin plates
- On the classical shell model underlying bilinear degenerated shell finite elements
- An assumed strain triangular solid shell element with bubble function displacements for analysis of plates and shells
- Least-squares finite element approximations for the Reissner-Mindlin plate
- Refined 9‐Dof triangular Mindlin plate elements
- Buckling analysis of rotationally periodic structures using shell element with relative degrees of freedom
- Finite element solution improved by full clamping element functions
- Formulation and evaluation of new triangular, quadrilateral, pentagonal and hexagonal discrete Kirchhoff plate/shell elements
- The p‐version of the finite element method for three‐dimensional curved thin walled structures
- An assumed strain triangular curved solid shell element formulation for analysis of plates and shells undergoing finite rotations
- A large‐strain elasto–plastic shell formulation using the Morley triangle
- On the relation between different parametrizations of finite rotations for shells
- Analysis of Poisson’s ratio for a micropolar elastic rectangular plate using the finite element method
- DYNAMIC STABILITY OF A COMPLETELY FREE CIRCULAR CYLINDRICAL SHELL SUBJECTED TO A FOLLOWER FORCE
- SIMPLIFICATION OF FINITE ELEMENT MODELS FOR STRUCTURES HAVING A BEAM-LIKE BEHAVIOUR
- VIBRATION ANALYSIS OF A THIN-PLATE BOX USING A FINITE ELEMENT MODEL WHICH ACCOMMODATES ONLY IN-PLANE MOTION
- EXPONENTIAL STABILIZATION OF A TRANSVERSELY VIBRATING BEAM VIA BOUNDARY CONTROL
- FINITE ELEMENT MODELLING OF INFINITE EULER BEAMS ON KELVIN FOUNDATIONS EXPOSED TO MOVING LOADS IN CONVECTED CO-ORDINATES
- FINITE ELEMENT VIBRATION ANALYSIS OF ROTATING TIMOSHENKO BEAMS
- SEMI-ANALYTICAL SHAPE FUNCTIONS IN THE FINITE ELEMENT ANALYSIS OF RECTANGULAR PLATES
- The Influence of “Shell Behavior” on Load Distribution for Thin-Walled Conical Joints
- Vibration Characteristics of Conical Shell Panels With Three-Dimensional Flexibility
- Development of One-Dimensional Models for Elastic Waves in Heterogeneous Beams
- Free Vibration of a Spinning Stepped Timoshenko Beam
- A Complex Potential-Variational Method for Stress Analysis of Unsymmetric Laminates With an Elliptical Cutout
- Error estimates for 3-d narrow finite elements
- A mixed least-squares method for an inverse problem of a nonlinear beam equation
- Stabilized Finite Element Formulations for Shells in a Bending Dominated State
- Approximation of the vibration modes of a plate by Reissner-Mindlin equations
- The post-processed Galerkin method applied to non-linear shell vibrations
- Objectivity of strain measures in the geometrically exact three-dimensional beam theory and its finite-element implementation
- Transient response analysis of structures made from viscoelastic materials
- The mixed finite element method for the quasi-static and dynamic analysis of viscoelastic timoshenko beams
- A mixed-enhanced finite-element for the analysis of laminated composite plates
- Stress-based finite element analysis of plane plasticity problems
- Application of the generalized conforming flat shell element to geometrical non-linear analysis for composite stiffened shell structures
- AC1 finite element including transverse shear and torsion warping for rectangular sandwich beams
- On the eigenvalues of a uniform cantilever beam carrying any number of spring-damper-mass systems
- Finite-element model sensitivity in the vibration of partially embedded beams
- A systematic construction of B-bar functions for linear and non-linear mixed-enhanced finite elements for plane elasticity problems
- Superconvergent Patch Recovery for plate problems using statically admissible stress resultant fields
- Shear stresses in prismatic beams with arbitrary cross-sections
- Computational schemes for non-linear elasto-dynamics
- Thin-walled closed box beam element for static and dynamic analysis
- Old and New Perspectives on the Positive-real Lemma in Systems and Control Theory
- ON SENSITIVITY AND RELATED PHENOMENA IN THIN SHELLS WHICH ARE NOT GEOMETRICALLY RIGID
- A Scalable Substructuring Method by Lagrange Multipliers for Plate Bending Problems
- Eigen-frequencies in thin elastic 3-D domains and Reissner-Mindlin plate models
- A one-dimensional theory of thin-walled curved rectangular box beams under torsion and out-of-plane bending
- Development of shear locking-free shell elements using an enhanced assumed strain formulation
- Two hybrid stress membrane finite element families with drilling rotations
- The least-squares finite element method in elasticity?Part I: Plane stress or strain with drilling degrees of freedom
- Higher-order responses of three-dimensional elastic plate structures and their numerical illustration byp-FEM
- Finite element modelling of thick plates on two-parameter elastic foundation
- Dual‐mixed p and hp finite elements for elastic membrane problems
- Analysis and load carrying behaviour of imperfection sensitive shells
- Rotation-free triangular plate and shell elements
- The mathematical shell model underlying general shell elements
- A hybrid stress ANS solid-shell element and its generalization for smart structure modelling. Part I?solid-shell element formulation
- A hybrid stress ANS solid-shell element and its generalization for smart structure modelling. Part II?smart structure modelling
- A functional for shells of arbitrary geometry and a mixed finite element method for parabolic and circular cylindrical shells
- An assumed strain formulation of efficient solid triangular element for general shell analysis
- Node-based uniform strain elements for three-node triangular and four-node tetrahedral meshes
- Stress recovery and error estimation for shell structures
- Hybrid stress tetrahedral elements with Allman's rotational D.O.F.s
- Accurate computation of design derivatives for plates and shells under transient dynamic loads
- Finite element modeling of orthotropic material behaviour in pneumatic membranes
- Nonlinear Shell Theory in Convective Description
- Adaptive Mixed Finite Element Method for Reissner‐Mindlin Plates
- Finite element linear and nonlinear, static and dynamic analysis of structural elements – an addendum – A bibliography (1996‐1999)
- A benchmark study of reduced-strain shell finite elements: quadratic schemes
- An Unconstrained Mixed Method for the Biharmonic Problem
- An axisymmetric \(B\)-spline model for the nonlinear inflation of rubberlike membranes
- Effect of satisfying stress boundary conditions in the axisymmetric vibration analysis of circular and annular plates
- Shock wave-loaded plates
- Nonlinear pure bending of toroidal shells of arbitrary cross-section
- Numerical simulation of the slider air bearing problem of hard disk drives by two multidimensional upwind residual distribution schemes over unstructured triangular meshes
- Co-rotational formulation for geometric nonlinear analysis of doubly symmetric thin-walled beams
- Dynamic responses of structures to moving bodies using combined finite element and analytical methods.
- Adaptive mixed finite element method for Reissner-Mindlin plate
- Stabilized and block approximate inverse preconditioners for problems in solid and structural mechanics
- On the dynamic behaviour of the Timoshenko beam finite elements.
- The web bridge
- On the characterization of localized solutions in inelastic solids: An analysis of wave propagation in a softening bar
- A model of finite strain viscoplasticity based on unified constitutive equations. Theoretical and computational considerations with applications to shells
- Application of transversely isotropic materials to multi-layer shell elements undergoing finite rotations and large strains.
- Finite element modelling of orthotropic material behaviour in pneumatic membranes
- Rigid-plastic finite element analysis of steel plates, structural girders and connections.
- A predictor-corrector method for structural nonlinear analysis.
- Stiffened plates and cylindrical shells under interactive buckling.
- A bendable finite element for the analysis of flexible cable structures.
- Finite element analysis and design of fixed-ended plain channel columns.
- A two-field mixed variational principle for partially connected composite beams.
- 3D dynamic modelling of spatial geared systems
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Unnamed Item
- A new spatial rotor beam element for modeling spatial manipulators with joint and link flexibility
- An eighteen-node hybrid-stress solid-shell element for homogeneous and laminated structures.
- A partial assumed strain formulation for triangular solid shell element.
- Nonlinear free vibration of isotropic plates with internal resonance
- Nonlinear dynamic stability characteristics of elastic plates subjected to periodic in-plane load
- The use of finite element analysis in the examination of instability in flat plates and curved panels under compression and shear
- Interval finite element method for beam structures
- The application of a refined non-conforming quadrilateral plate bending element in thin plate vibration and stability analysis.
- A nonlinear higher order shear deformation shell element for dynamic explicit analysis. I: Formulation and finite element equations.
- A nonlinear higher order shear deformation shell element for dynamic explicit analysis. II: Performance validation through standard tests.
- Analysis of a curved beam on uncertain elastic foundation.
- A hybrid stress nine-node degenerate shell element for geometric nonlinear analysis
- Construction of optimal 3-node plate bending triangles by templates
- Finite element approximation of solutions to a class of nonlinear hyperbolic-parabolic equations
- Error through the constitutive relation for beam and \(C^0\) plate finite elements: Static and vibration analyses
- The first locking-free plane elastic finite element: Historia mathematica
- Calculating the energy-norm FEM error for Reissner-Mindlin plates without known reference solution
- Use of an upwind finite volume method to solve the air bearing problem of hard disk drives
- Post-buckling behavior of thin steel plates using computational models
- Explicit through-thickness integration schemes for geometric nonlinear analysis of laminated composite shells
- Nonlinear analysis of steel-concrete composite beams curved in plan
- Shear flexible curved spline beam element for static analysis
- Hierarchical assumed strain-vorticity shell element with drilling degrees of freedom
- Hybrid strain based geometrically nonlinear laminated composite triangular shell finite elements
- Ring plate on a transversely isotropic elastic half-space
- Finite element solutions for optimal triangular plates
- Elastic-plastic stresses in a rotating solid disk
- Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns
- Nonlinear vibration of plates by the hierarchical finite element and continuation methods
- A high-order shear element for nonlinear vibration analysis of composite layered plates and shells
- Rotating anisotropic disc of uniform strength
- A new plate finite element using integral representation interpolation
- Hierarchic models for laminated plates and shells
- Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: Theoretical and computational analysis
- Some computational aspects of a group theoretic finite element approach to the buckling and postbuckling analyses of plates and shells of revolution
- Finite elements for stochastic media problems
- The bird's eye view on finite element method for structures with large stochastic variations
- Space-variant finite element reliability analysis
- Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials.
- A quadratic assumed natural strain curved triangular shell element
- The finite deformation theory for beam, plate and shell. IV: The FE formulation of Mindlin plate and shell based on Green-Lagrangian strain
- The TRIC shell element: Theoretical and numerical investigation
- Families of 4-node and 9-node finite elements for a finite deformation shell theory. An assessment of hybrid stress, hybrid strain and enhanced strain elements
- Optimal control of a variational inequality with application to the Kirchhoff plate having small flexural rigidity
- Uniform boundary stabilization of nonlinear spherical shells by using two controls only: Analysis and numerical computations
- A systematic deduction of linear natural approach equations
- A simple finite element model for the geometrically nonlinear analysis of thin shells
- Computing finite rotations of shells by an asymptotic-numerical method
- Finite element formulation for non-smooth oscillations of an elastic beam with a friction device
- Extension of field consistence approach into developing plane stress elements.
- Finite element analysis of dynamic response of wrinkling membranes
- Linear models of buckling and stress stiffening
- Two kinds of \(C^0\)-type elements for buckling analysis of thin-walled curved beams
- Geometrically exact 3D beam theory: Implementation of a strain-invariant finite element for statics and dynamics
- Dynamic model of coupled shaft torsional and blade bending deformations in rotors
- Upper and lower error bounds for plate-bending finite elements
- On the connection between some linear triangular Reissner-Mindlin plate bending elements
- Statically and kinematically exact nonlinear theory of rods and its numerical verification
- Efficient inverse frequency design of tapered beams including shear deformations
- Evaluation of triangular plate elements in rigid-plastic finite element analysis of reinforced concrete
- A simple nonlinear triangular plate element and strategies of computation for nonlinear analysis
- Generalized energy-momentum method for nonlinear adaptive shell dynamics
- Numerical implementation of multiplicative elasto-plasticity into assumed strain elements with application to shells at large strains
- Numerical analysis of complex instability behaviour using incremental-iterative strategies
- Differential quadrature element method: A new approach for free vibration analysis of polar Mindlin plates having discontinuities
- High-accuracy plane stress and plate elements in the quadrature element method
- 5-node hybrid/mixed finite element for Reissner-Mindlin plate
- Finite element large deflection static analysis of shallow and deep stiffened shells
- Large nonstationary random responses of shell structures with geometrical and material nonlinearities
- On volumetric locking of low‐order solid and solid‐shell elements for finite elastoviscoplastic deformations and selective reduced integration
- Extension of the ?solid-shell? concept for application to large elastic and large elastoplastic deformations
- MITC finite elements for laminated composite plates
- Non-linear spatial Timoshenko beam element with curvature interpolation
- Stability and comparison of different linear tetrahedral formulations for nearly incompressible explicit dynamic applications
- New superelements for singular derivative problems of arbitrary order
- Finite element analysis of membrane wrinkling
- Free vibration analysis of a Timoshenko beam carrying multiple spring-mass systems by using the numerical assembly technique
- Dynamic inflation of non-linear elastic and viscoelastic rubber-like membranes
- Modelling of elastic continua using a grillage of structural elements based on discrete element concepts
- Hybrid finite elements for the computation of sandwich plates
- Energy and momentum conserving elastodynamics of a non-linear brick-type mixed finite shell element
- Rotation shape functions for a low-order quadrilateral plate element with mid-side rotations
- On the theory of a Cosserat point and shear locking in thin beams
- A basic thin shell triangle with only translational DOFs for large strain plasticity
- A three‐noded shear‐flexible curved beam element based on coupled displacement field interpolations
- Stability analysis of cylindrical shells using refined non-conforming rectangular cylindrical shell elements
- A posteriori error estimator for a mixed finite element method for Reissner-Mindlin plate
- Refined explicit integration of elastoplastic models with automatic error control
- Large‐strain elasto‐plastic shell analysis using low‐order elements
- Customizing the mass and geometric stiffness of plane beam elements by Fourier methods
- Higher‐order hybrid‐mixed axisymmetric thick shell element for vibration analysis
- An improved three‐node hybrid‐mixed element for Mindlin/Reissner plates
- Fully C1‐conforming subdivision elements for finite deformation thin‐shell analysis
- About Using Moment of Momentum and Angular Velocity Vectors for Description of Rotational Motions of a Rigid Body
- Analysis of shear locking in Timoshenko beam elements using the function space approach
- A mixed finite element for plate bending with eight enhanced strain modes
- Bending analysis of micropolar elastic beam using a 3-D finite element method
- On the three-dimensional stability loss problem of the viscoelastic composite plate
- Stability and asymmetric vibrations of pressurized compressible hyperelastic cylindrical shells
- Asymptotic treatment of the trapeze effect in finite element cross-sectional analysis of composite beams
- Imperfection sensitivity of flat plates under combined compression and shear
- Buckling loads of tank shells with imperfections
- Effects of imperfections on the buckling response of compression-loaded composite shells
- Buckling of geometrically imperfect cylindrical shells-definition of a buckling load
- An idealization concept for the stability analysis of ring-reinforced cylindrical shells under external pressure
- Shells with random geometric imperfections simulation-based approach
- On the influence of geometric imperfections on the stability and vibration of thin-walled shell structures
- An energy-momentum integration scheme and enhanced strain finite elements for the non-linear dynamics of shells
- An aeroelastic model for composite rotor blades with straight and swept tips. I: Eroelastic stability in hover
- Explicit eight-noded quadrilateral elements
- Vibration of plates and shells using finite elements (1996--1997)
- Adaptive finite element analysis of structures under transient dynamic loading using modal superposition
- Analytical solution for cylindrical thin shells with normally intersecting nozzles due to external moments on the ends of shells
- A one-pass approach to dynamics of high-speed machinery through three-node Lagrangian beam elements
- A new numerical method for the dynamic analysis of impact loads in flexible beams.
- The effect of the geometry and the load level on the dynamic failure of rotating disks
- Development of special finite elements for free boundaries
- A shell finite element for large strain elastoplasticity with anisotropies. I: Shell theory and variational principle
- A shell finite element for large strain elastoplasticity with anisotropies. II: Constitutive equations and numerical applications
- A high precision element with a central circular hole
- Axisymmetric shells and plates on tensionless elastic foundations
- Postbuckling analysis and imperfection sensitivity of general shells by the finite element method
- Transient response analysis of one-dimensional distributed parameter systems
- Differential quadrature element method for static analysis of Reissner-Mindlin polar plates
- Natural frequencies of composite plates with tailored thermal residual stresses
- An assessment of shell theories for buckling of circular cylindrical laminated composite panels loaded in axial compression
- Hybrid finite element formulations for elastodynamic analysis in the frequency domain
- Plate theory and complementary displacement method
- A numerical axisymmetric collapse analysis of viscoplastic cylindrical shells under axial compression
- Rational finite element method for elastic bending of Reissner plates
- Nonlinear forced vibration analysis of the rectangular plates by the Fourier series method
- An improved 4-node quadrilateral plate bending element of the Reissner-Mindlin type
- A reasonable method for constracting general element DM4 of thick and thin plate with effectual and reliable numerical solutions
- On the determination of natural frequencies and mode shapes of cable-stayed bridges
- Simple and effective elements based upon Timoshenko-Mindlin shell theory
- Assumed stress formulation of high order quadrilateral elements with an improved in-plane bending behaviour
- An eigen-mode method in kinematic shakedown analysis
- Frequencies and mode shapes for thick truncated hollow cones
- A new line DOF triangular element for analysis of thick and thin plates
- A simple correction to the first-order shear deformation shell finite element formulations
- Finite-element dynamic analysis of a rotating shaft with or without nonlinear boundary conditions subject to a moving load.
- Development of eight-node quadrilateral membrane elements using the area coordinate method
- Comparison of numerical modelling and experiments for the dynamic response of circular elasto-viscoplastic plates
- Large deformation tests and total Lagrangian finite element analyses of flexible beams
- Effect of material nonlinearity in unidirectional composites on the behavior of beam structures
- Boundary layer realization in thin elastic three-dimensional domains and two-dimensional hierarchic plate models
- Singularity in rotating orthotropic discs and shells
- Vibration analysis of a circular disk tensioned by rolling using finite element method
- Three-dimensional variational theory of laminated composite plates and its implementation with Bernstein basis functions
- High-order triangular sandwich plate finite element for linear and nonlinear analyses.
- Composite laminates: Nonlinear interlaminar stress analysis by multi-layer shell elements
- Buckling of thin cylindrical shells under axial compression
- Thermal stresses in a plate with a circular reinforcement
- Chaotic behavior of an elastoplastic bar in tensile test over a wide range of strain rate: A numerical investigation
- Large inelastic strain analysis by multilayer shell elements
- Dynamic elastic buckling of a slender beam with geometric imperfections subject to an axial impulse
- Finite element analysis of fir-tree region in turbine discs.
- Numerical analysis of dynamic behavior of stream turbine blade group
- Torsional rigidity of reinforced concrete bars with arbitrary sectional shape.
- A new formulation of eight-node hexagonal solid element
- Buckling and postbuckling of soft-core sandwich plates with composite face sheets
- Adding bending stiffness to 3-D membrane FEM programs
- Wrinkling of thick orthotropic sandwich plates under general loading conditions
- Numerical and analytical study on deep biaxial bending collapse of thin-walled beams
- Conforming finite element approximation for shells with little regularity
- The solution of elastostatic and elastodynamic problems with Chebyshev spectral finite elements
- A V-cycle multigrid method for TRUNC plate element
- A co-rotational finite element formulation for buckling and postbuckling analyses of spatial beams
- A stabilized 3-D co-rotational formulation for geometrically nonlinear analysis of multi-layered composite shells
- Large-deformation triangular and tetrahedral element formulations for unstructured meshes
- Axisymmetric vibration analysis of rotating annular plates by a 3D finite element
- Limit state analysis of reinforced concrete plates subjected to in-plane forces
- Geometrically-exact sandwich shells: The static case
- On rigid components and joint constraints in nonlinear dynamics of flexible multibody systems employing 3D geometrically exact beam model
- Three-dimensional vibration of cylindrical shell panels -- solution by continuum and discrete approaches.
- An \(h\)-adaptive method for elasto-plastic shell problems
- On the physical significance of higher-order kinematic and static variables in a three-dimensional shell formulation
- A numerical continuation method based on Padé approximants
- Multilayer shells: Geometrically-exact formulation of equations of motion
- Static path jumping to attain postbuckling equilibria of a compressed circular cylinder
- Post-buckling analysis of shell and membrane structures by dynamic relaxation method
- The finite deformation theory for beam, plate and shell. V: The shell element with drilling degree of freedom based on Biot strain.
- A new shell element accounting for through-thickness deformation
- Improvement on the 10-node tetrahedral element for three-dimensional problems
- Total hourglass control for hyperelastic materials
- Geometrically nonlinear analysis of layerwise anisotropic shell structures by hybrid strain-based lower-order elements
- Nonuniform warping torsion of orthotropic composite beams
- Plane strain elastic-plastic bending of a strain-hardening curved beam
- An improved discrete Kirchhoff triangular element for bending, vibration and buckling analyses
- A modified first-order-warping theory for shear deformation analysis
- An alternative version of the Pian-Sumihara element with a simple extension to nonlinear problems
- Finite element analysis of air-supported membrane structures
- Elasto-plastic analysis of Kirchhoff plates by high simplicity finite elements
- Development of a new quadrilateral thin plate element using area coordinates
- Kinematics of finite rotation shells with in-plane twist parameter
- A corotational formulation for thin-walled beams with monosymmetric open section
This page was built for publication: Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum
