Finite element modelling and simulation of indentation testing: a bibliography (1990‐2002)
From MaRDI portal
Publication:4822965
DOI10.1108/02644400410511828zbMath1063.74002OpenAlexW2087938999MaRDI QIDQ4822965
Publication date: 26 October 2004
Published in: Engineering Computations (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1108/02644400410511828
Contact in solid mechanics (74M15) Finite element methods applied to problems in solid mechanics (74S05) General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to mechanics of deformable solids (74-00)
Cites Work
- The effect of tip radius on nano-indentation hardness tests
- A computational model for the indentation and phase transformation of a martensitic thin film
- The analysis of three-dimensional cracks generated by sharp indentation
- Analysis of the impression creep test method using a rectangular indenter for determining the creep properties in welds
- Effect of extrinsic and intrinsic factors on an indentation test
- Determination of monotonic stress-strain curve of hard materials from ultra-low-load identation tests
- Spherical indentation of composite laminates with controlled gradients in elastic anisotropy
- New analytical procedure to determine stress-strain curve from spherical indentation data
- The prediction of a size effect in micro-indentation
- Indentation of solids with gradients in elastic properties. I: Point force. II: Axisymmetric indentors
- Similarity analysis of inelastic contact
- Elastic-plastic analysis of a triangular pyramidal indentation
- Analysis of Vickers indentation
- Scaling relationships in conincal indentation of elastic-perfectly plastic solids
- Spherical impression of thin elastic films on elastic-plastic substrates
- Analysis of the impact of a sharp indenter.
- A finite element-mathematical programming method for elastoplastic contact problems with friction
- An analysis of fully plastic Brinell indentation
- Numerical analysis of delamination in multilayered composite plates
- Computational micromechanics
- A finite element study of the indentation mechanics of an adhesively bonded layered solid
- Analysis of Berkovich indentation
- Nucleation of dislocations beneath a plane strain indenter
- A continuum plasticity model for the constitutive and indentation behaviour of foamed metals
- Oblique indentation of creeping solids
- Determination of constitutive properties of thin metallic films on substrates by spherical indentation using neural networks
- A theoretical investigation of sharp indentation testing of a nearly-brittle material, with some experimental results
- Frictionless indentation of dissimilar elastic-plastic spheres
- Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests
- A finite element analysis of the indentation of an elastic-work hardening layered half-space by an elastic sphere
- Numerical analysis of indentation-induced cracking of brittle coatings on ductile substrates
- Hardening behaviour law versus rigid perfectly plastic law: application to a cold forging tool steel
- On oblique contact of creeping solids.
- Indentation of plastically graded substrates by sharp indentors
- Transient creep analysis of ball indentation
- Development of plastic zones and residual stress in elasto-plastic contact problems with stress singularities in elastic range
- Determination of constitutive properties from spherical indentation data using neural networks. I: The case of pure kinematic hardening in plasticity laws. II: Plasticity with nonlinear isotropic and kinematic hardening
- On frictional effects at inelastic contact between spherical bodies
- The mechanics of size-dependent indentation
- Finite element analysis of the wedge delamination test
- Strength Analysis of Spherical Indentation of Piezoelectric Materials
- Determination of Poisson’s Ratio by Spherical Indentation Using Neural Networks—Part I: Theory
- Determination of Poisson’s Ratio by Spherical Indentation Using Neural Networks—Part II: Identification Method
- Finite Element Approximation of a Rigid Punch Indenting a Membrane
- The Hertzian Cone Crack
- Arbitrary Lagrangian‐Eulerian finite element analysis of large deformation in contacting bodies
- Dynamic contact responses of laminated composite plates according to the impactor's shapes
- The Effect of Fiber Poisson Expansion in Micro-Indentation Tests
- Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading
- Three-Dimensional Finite Element Analysis of Subsurface Stresses and Shakedown Due to Repeated Sliding on a Layered Medium
- Finite element simulation of wedge indentation
- Impact analysis of laminated composite plates with statical indentation laws
- On the determination of elastic coefficients from indentation experiments
- A new one-pass approach for large deformation multibody frictional contact analysis
- Spherical indentation of elastic–plastic solids
- Finite element simulation of plane strain plastic-elastic indentation on single-crystal silicon.
- 3-D modeling of nanoindentation experiment on a coating-substrate system
- An elastic-plastic-cracking model for finite element analysis of indentation cracking in brittle materials
- Taylor-based nonlocal theory of plasticity: Numerical studies of the micro-indentation experiments and crack tip fields
- Indentation of a soft metal film on a hard substrate: strain gradient hardening effects
- New method to determine the mechanical properties of heat treated steels.
- Identification of the intrinsic material length in gradient plasticity theory from micro-indentation tests
- Fracture mechanisms induced in a brittle material by a hard cutting indenter
- Microplane model for stiff foams and finite element analysis of sandwich failure by core indentation.
