Finite element analyses and simulations of gears and gear drives
DOI10.1108/02644400810857056zbMath1257.70001OpenAlexW1535708734MaRDI QIDQ4908010
Ludvik Prasil, Jaroslav Mackerle
Publication date: 27 February 2013
Published in: Engineering Computations (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1108/02644400810857056
Contact in solid mechanics (74M15) Finite element methods applied to problems in solid mechanics (74S05) Kinematics of mechanisms and robots (70B15) General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to mechanics of deformable solids (74-00) Dynamics of multibody systems (70E55) General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to mechanics of particles and systems (70-00)
Related Items (1)
Cites Work
- Unnamed Item
- Unnamed Item
- Unnamed Item
- Quasi-static analysis of a face gear under torque
- Optimization of the trochoid form in spur wheels
- Fusion analyses of lifecycle safety and damage tolerance for cracked structures
- A stochastic finite element method for fatigue reliability analysis of gear teeth subjected to bending
- Computerized integrated approach for design and stress analysis of spiral bevel gears
- A method for calculating static transmission errors of plastic spur gears using FEM evaluation
- Modified involute helical gears: computerized design, simulation of meshing and stress analysis.
- Meshing control of the double-enveloping hourglass worm gearing under the conditions of existing the errors and the load.
- Asymmetric modified spur gear drives: Reduction of noise, localization of contact, simulation of meshing and stress analysis
- Face-gear drive with spur involute pinion: geometry, generation by a worm, stress analysis
- A finite element approach to dynamic modeling of flexible spatial compound bar-gear systems
- Analytical geometry of straight conical involute gears
- Computerized design, simulation of meshing, and contact and stress analysis of face-milled formate generated spiral bevel gears
- Stress analysis of a helical gear set with localized bearing contact.
- Efficient evaluation of spur gear tooth mesh load using pseudo-interference stiffness estimation method
- New geometry of face worm gear drives with conical and cylindrical worms: Generation, simulation of meshing, and stress analysis
- A model for simulating the quasi-static and dynamic behaviour of solid wide-faced spur and helical gears
- A computational model for determination of service life of gears.
- Finite element modeling of spur gearing fractures.
- Static and dynamic analysis of spur and bevel gears using FEM
- New version of Novikov-Wildhaber helical gears: computerized design, simulation of meshing and stress analysis.
- Contact problem of gears using Overhauser splines
- Generalized concept of meshing and contact of involute crossed helical gears and its application
- Design, generation and stress analysis of face-gear drive with helical pinion
- Application of modified geometry of face gear drive
- A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analyses of planetary/epicyclic gear sets
- Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears
- Investigation into non‐steady‐state three‐dimensional helical extrusion of twisted sections by the rigid‐plastic finite element method
- Computational modelling of the surface fatigue crack growth on gear teeth flanks
- Finite element modelling of geared multi-body system
- Load analysis with varying mesh stiffness
- Conservative discretization of contact/impact problems for nearly rigid bodies
- Cold forging of gears: experimental and theoretical investigation.
- Design, generation and TCA of new type of asymmetric face-gear drive with modified geometry
- Integration of finite element analysis and optimum design on gear systems.
- 3D dynamic modelling of spatial geared systems
This page was built for publication: Finite element analyses and simulations of gears and gear drives
