Finite element modelling and simulation of bulk material forming

DOI10.1108/02644400610652983zbMath1182.74204OpenAlexW1540938915MaRDI QIDQ5190507

Jaroslav Mackerle

Publication date: 18 March 2010

Published in: Engineering Computations (Search for Journal in Brave)

Full work available at URL: https://doi.org/10.1108/02644400610652983

zbMATH Keywords

simulationfinite element analysisbibliographies

Mathematics Subject Classification ID

Finite element methods applied to problems in solid mechanics (74S05) General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to mechanics of deformable solids (74-00)

Uses Software

• SIMEM3 Renault

Cites Work

• Analysis of blank thickening in deep drawing processes using the theory of a Cosserat generalized membrane
• Adaptive remeshing for ductile fracture prediction in metal forming
• Finite element simulation of the rolling and extrusion of multi-phase materials. Application to the rolling of prepared sugar cane
• Effect of texture on earing in FCC metals: Finite element simulations
• Faster analysis of forming problems through use of coarse mesh models for dies
• A three-dimensional semi-analytical model of rolling stand deformation with finite element validation
• A general algorithm for plastic flow simulation by finite element limit analysis
• Residual stress formation during the roller straightening of railway rails
• Adaptive exponential finite elements for the shear boundary layer in the bearing channel during extrusion
• Sensitivity of forming processes to shape parameters
• Plane strain extrusion by sequential limit analysis
• Coupled FEM and texture modelling of plane strain extrusion of an aluminium alloy
• Incorporation of an anisotropic (texture-based) strain-rate potential into three-dimensional finite element simulations
• Mechanical property changes in drawing/extrusion of hardening viscoplastic materials with damage
• Influence of friction and geometry on plastic spread
• Elastic-plastic analysis of the stress and strain distribution in asymmetric rolling
• Finite element analysis of flat rolling with inclusion of anisotropy
• On the numerical solution of a three-dimensional extrusion model
• An algorithm for improved convergence in forming analysis
• An investigation of contact problem between strip and work roll with a smooth straight surface during cold rolling
• Consideration of geometric nonlinearity in rigid-plastic finite element formulation of continuum elements for large deformation
• Constitutive model of adhesive and ploughing friction in metal-forming processes
• Rigid-plastic finite-element method for analysis of three-dimensional rolling that requires small memory capacity
• Residual stress in some elasto-plastic problems of rolling contact with friction
• Elasto-plastic finite element modelling of strip cold rolling using Eulerian fixed mesh technique
• Finite element analysis of the deep drawing process using variational inequalities
• A rolling process two-dimensional finite element model analysis
• Modified slab analysis of asymmetrical plate rolling
• Effect of ductile fracture criteria on chevron crack formation and evolution in drawing.
• Numerical modelling of ductile plastic damage in bulk metal forming.
• A continuum sensitivity method for the design of multi-stage metal forming processes.
• Numerical procedure for predicting the rolling contact fatigue crack initiation
• Prediction of temperature distribution and phase transformation on the run-out table in the process of hot strip rolling
• Instability and damage effects in the modeling of metal forming
• Damage and fracture simulation during the extrusion processes
• Analysis of stress in cross wedge rolling with application to failure
• Deformation analysis of the round-to-square extrusion: a numerical and experimental investigation.
• Three-dimensional rigid-plastic finite element method using diagonal matrix for large-scale simulation of metal-forming processes
• Hot backward extrusion comparative analyses by a combined finite element method
• Analysis of ribbed rolling by rigid-viscoplastic FEM
• Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools
• Simulation of stochastic metal forming process for rigid-viscoplastic material
• Different degree of reduction and sliding phenomenon study for three-dimensional hot rolling with sandwich flat strip
• Efficient variable stiffness methods for cooling of hot-rolled steel sections.
• Application of direct method for a nonlinear-kinematic-hardening material under rolling/sliding line contact: Constant ratchetting rate
• Linear elements for metal-forming problems within the flow approach
• A practical method for finite element ring rolling simulation using the ALE flow formulation
• Finite element analysis considering fracture strain of sheath material and die lubricant in extrusion process of Al/Cu clad composites and its experimental investigation
• Extrusion die design for flow balance using FE and optimization methods
• Hardening behaviour law versus rigid perfectly plastic law: application to a cold forging tool steel
• Simulation and analysis of rotary forging a ring workpiece using finite element method.
• A large-strain elastic-plastic finite element analysis of rolling process
• Elastoplastic finite element analyses of metal deformations using polycrystal constitutive models
• Improving dimensional accuracy of a u-shaped part through an orthogonal design experiment.
• On the utilisation of ductile fracture criteria in cold forging.
• An investigation of fracture criteria for predicting surface fracture in paste extrusion
• A new method of preform design in hot forging by using electric field theory.
• Analysis and design of flat-die hot extrusion process. I: Three-dimensional finite element analysis
• Analysis and die design of flat-die hot extrusion process. II: Numerical design of bearing lengths
• An integrated FE process model for precision analysis of thermo-mechanical behaviors of rolls and strip in hot strip rolling.
• Quadratic programming method in numerical simulation of metal forming process.
• Fracture predicting in bulk metal forming
• Single crystal and polycrystal elasto-viscoplasticity: Application to earing in cup drawing of F.C.C. materials
• Service life estimation of extrusion dies by numerical simulation of fatigue-crack-growth
• Influence of strain distribution on microstructure evolution during rod-rolling
• Finite element analysis with deformation behavior modeling of globular microstructure in forming process of semi-solid materials
• Simulation of chevron crack formation and evolution in drawing
• A Gauss-Seidel like algorithm to solve frictional contact problems
• Local analytical design sensitivity analysis of the forging problem using FEM
• Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian--Eulerian formulation
• Forging process analysis with arbitrary shape die in semi-solid material with high solid fraction
• A novel mixed Eulerian--Lagrangian finite-element method for steady-state hot rolling processes
• A sensitivity analysis for the optimal design of metal-forming processes
• 3D analysis of cold rolling using a constitutive model for interface friction
• A quadrilateral mesh generator for adaptive procedures in bulk forming processes
• Some experiences of shape‐forming process: experiments and numerical simulations
• Solution of quasi‐static, force‐driven problems by means of a dynamic‐explicit approach and an adaptive loading procedure
• Inverse problems in finite element simulation of metal forming processes
• Simulation model for hot and cold forging by mixed methods including adaptive mesh refinement
• Investigation into non‐steady‐state three‐dimensional helical extrusion of twisted sections by the rigid‐plastic finite element method
• Numerical simulation of multi‐blow forging processes using the explicit time integration finite element method
• A three‐dimensional finite element analysis of hot extrusion through square dies
• An efficient algorithm to estimate optimal preform die shape parameters in forging
• Response surface method for probabilistic assessment of metal forming failures
• Finite element analyses and simulations of sheet metal forming processes
• Stress Field in Finite Width Axisymmetric Wound Rolls
• A study of the finite element stabilized matrix to the hemispherical cup-drawing process
• Finite element methods and material processing technology, an addendum (1994‐1996)
• A general three‐dimensional contact procedure for implicit finite element codes
• A new upper-bound elemental technique approach
• A mixed variational formulation for the solution of Norton-Hoff viscoplastic flows
• FE-analysis of the recipient of an extrusion press applying microstructure-related material models
• Simulation of surface pitting due to contact loading
• Simulation of metal forming processes with finite element methods
• Sensitivity analysis and shape optimization for preform design in thermo-mechanical coupled analysis
• Process design and sensitivity analysis in metal forming
• Tool design optimization in extrusion processes
• Finite element simulation of the steel plates hot rolling process
• Shape optimization of axisymmetric preform tools in forging using a direct differentiation method
• R-S ADAPTED ARBITRARY LAGRANGIAN-EULERIAN FINITE ELEMENT METHOD FOR METAL-FORMING PROBLEMS WITH STRAIN LOCALIZATION
• Die shape optimal design in three-dimensional shape metal extrusion by the finite element method
• Rigid-plastic/rigid-viscoplastic FE simulation using linear programming for metal forming
• Implicit solid, flow and flow-solid finite element approaches in blade forging simulation
• Adjoint state method for shape sensitivity analysis in non‐steady forming applications
• A continuum Lagrangian sensitivity analysis for metal forming processes with applications to die design problems
• An efficient solution method for finite element ring-rolling simulation
• A new approach for a 3D deep drawing using an Asymptotic Numerical method
• Three‐dimensional finite element analysis for hollow section extrusion of a triply‐connected section using mismatching refinement with domain decomposition
• Computational strategies for some technical issues in the simulation of the strip rolling processes using rigid-plastic FEM
• Remeshing for metal forming simulations?Part II: Three-dimensional hexahedral mesh generation
• An application of a master-slave algorithm for solving 3D contact problems between deformable bodies in forming processes
• Numerical analysis of a new Eulerian-Lagrangian finite element method applied to steady-state hot rolling processes
• Three‐dimensional finite element simulation of connecting rod forging using a new remeshing scheme
• Implicit scheme for contact analysis in non‐steady state forming
• Metal forming simulation
• Metal forming simulation
• Development of a grid‐based mesh generation technique and its application to remeshing during the finite element simulation of a metal forming process
• Modelling friction near sharp edges using a Eulerian reference frame: application to aluminium extrusion
• A continuum sensitivity method for finite thermo-inelastic deformations with applications to the design of hot forming processes
• Stabilized finite element method for viscoplastic flow: formulation with state variable evolution
• Finite element methods and material processing technology
• OPTIMAL DESIGN FOR NON-STEADY-STATE METAL FORMING PROCESSES—I. SHAPE OPTIMIZATION METHOD
• Process optimal design in non-isothermal, steady-state metal forming by the finite element method
• A mixed elastoplastic/rigid-plastic material model
• Anisotropic elastic–plastic analysis of shells at large strains. A comparison of multiplicative and additive approaches to enhanced finite element design and constitutive modelling
• Rigid‐plastic finite element analysis of incremental radial forging process using the automatic expansion of domain scheme
• Preform optimal design in metal forging using genetic algorithms
• Sensitivity of model parameters in stretch bending of aluminium extrusions.
• Application of 3D FEM-slab method to shape rolling.
• Die design optimization for axisymmetric hot extrusion of metal matrix composites
• Free-surface ductility in bulk forming processes
• Indenting, buckling and piercing of aluminum beverage cans.
• Cold forging of gears: experimental and theoretical investigation.
• Stabilized finite element method for viscoplastic flow: Formulation and a simple progressive solution strategy
• Finite element modelling of the initial stages of a hot forging cycle
• Edge effect on elastic-plastic rolling/sliding contacts
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item
• Unnamed Item

This page was built for publication: Finite element modelling and simulation of bulk material forming